
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

Doodle Drive is an open-source printed circuit board by eliavandini, from the eliavandini/Doodle-Drive repository on GitHub. It is a 2-layer board of 66 × 55.5 mm with 91 parts on 132 nets, routed with 1,187 tracks and 135 vias.
It is built around the CP2102-GMR and DRV8825PWP. Its parts include 34 capacitors, 31 resistors, 9 connectors, 6 diodes and 3 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C8, C12, C13, C14, C20, C21, C23, C24, C31, C32, C33, C34 |
| 8 | 100m | Resistor_SMD:R_1206_3216Metric | R13, R14, R15, R16, R24, R25, R26, R27 |
| 6 | 5.1k | Resistor_SMD:R_0805_2012Metric | R3, R8, R19, R20, R30, R31 |
| 5 | LED_RED | LED_SMD:LED_0805_2012Metric | D2, D3, D4, D5, D6 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C11, C16, C27, C28 |
| 4 | 10nF | Capacitor_SMD:C_0805_2012Metric | C5, C15, C25, C26 |
| 4 | 10uF | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C18, C22, C29, C30 |
| 4 | 15k | Resistor_SMD:R_0805_2012Metric | R5, R7, R10, R22 |
| 4 | 1M | Resistor_SMD:R_0805_2012Metric | R17, R18, R28, R29 |
| 4 | 9.1k | Resistor_SMD:R_0805_2012Metric | R11, R12, R21, R23 |
| 4 | DRV8825PWP | DRV8825PWP:IC_TPS61196PWPRQ1 | DRV1, DRV2, DRV3, DRV4 |
| 4 | PINHD_1x6_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4, J5, J7, J8 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C7, C10 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C6, C9 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C17 |
| 1 | 0ohm | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 11k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 25MHZ 12PF | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 32.768KHz ±20ppm 12.5pF | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 8.2k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | AP7343-33W5-7 | AP7343-30W5-7:SOT95P285X145-5N | U6 |
| 1 | CP2102-GMR | digikey-footprints:VFQFN-28-1EP_5x5mm | U7 |
| 1 | LED_GREEN | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | PINHD_1x2_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | PINHD_1x3_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | PINHD_1x4_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | R_Potentiometer | poti:3386P1473LF | RV4 |
| 1 | STM32F411RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J3 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J1 |

doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

SunDevilRocketry/Flight-Computer
General purpose flight computer for high powered rocketry projects.

KaliAssistant/Lichee-Jack-pcb
Open hardware extension board for Lichee-Jack with battery, Ethernet, and LED integration.

DetectiveMittens/Cooee
An open-source phone that can operate without GSM or LTE coverage. Utilising LoRa modulation and mesh networking to enable long range "off-grid" communication

FabianSchwartau/OBSPro
Version of the OpenBikeSensor hardware optimized for PCBA

sjbar03/XCKU5P-Development-Notes
Notes while learning how to develop with the Xilinx Ultrascale+ XCKU5P FPGA. Also notes on PCB design.

SkullKill/ESP32-Wall-Clock-PCB
ESP32 based 30cm Wall Mounted Clock. WiFi, NTP, SNMP, web interface, MicroUsb, Type-C, HG3613 Retrofit

BrijModi/ESP32-Dev-Kit-Clone
A 2-layer PCB design of the ESP32 Dev Kit V1 (30-pin), created using KiCad 9.0. Includes complete schematics, layout, and BOM.
It measures 66 × 55.5 mm and has 2 copper layers, 1.6 mm thick.
91 parts, built around the CP2102-GMR and DRV8825PWP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the eliavandini/Doodle-Drive repository on GitHub, at the commit this page was made from: the board is Doodle Drive.kicad_pcb and its schematic Doodle Drive.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask eliavandini before reusing the design.