

Berlin bahn
There are some commercial maps of similar design out there. They mostly use multiple LEDs per station and show less complexity by splitting services into separate maps.
- Size
- 153 × 107 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 332
- Nets
- 365
- Pads
- 1,343
- Tracks, vias
- 773, 1,011
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Aug 2026
- Updated
- 17 Aug 2026
Overview
Berlin bahn is an open-source printed circuit board by elektrojupp, from the elektrojupp/berlin_bahn repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 153 × 107 mm with 332 parts on 365 nets, routed with 773 tracks and 1,011 vias.
It is built around the ESP32-DEVKITC-32UE, XL-1010RGBC-WS2812B-DZ and 74HC14. Its parts include 325 ICs, 1 capacitor and 1 resistor. It belongs with the ESP32 boards of this library.
Main components
3ESP32-DEVKITC-32UE
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesXL-1010RGBC-WS2812B-DZ
SMD1010SMD1010 SMT ROHSXINGLIGHTUncategorised74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInverters
README
README.mdPublic Transport Map of Berlin
There are some commercial maps of similar design out there. They mostly use multiple LEDs per station and show less complexity by splitting services into separate maps.
This project shows the complete maps for Berlin’s suburban rail and subway. It uses 312 NeoPixel-compatible RGB LEDs for 314 stations on a two-layer board. The firmware targets an ESP32-S3 DevKitC-1 N16R8 with 8 MB PSRAM.
PCB Design
The PCB design is done in KiCad 9. It uses SK6805-EC10-000 NeoPixel-compatible LEDs by OPSCO connected in one non-intersecting path.
The LEDs are only 1.1×1.1 mm in size and can be sourced from JLCPCB for PCB manufacturing and assembly.
The current KiCad board is 153×107 mm, roughly the size of a DIN A6 sheet.
The manufactured board shown in the photos is V1 hardware. The design files in hw/ are a newer revision to work with the ESP32-S3 DevKitC-1 N16R8.
Scaling of the PCB can be done with a Python script. It includes automatic placement of the LEDs and routing in between. The scaled version only needs adjustment of the text size and placement of the ESP32 dev module connector.
Software
The current software lives in sw/. It is developed using VS Code, PlatformIO, and ESP-IDF and currently targets the esp32-s3-devkitc-1-n16r8.
Build from the repository root:
cd sw
pio run -e esp32-s3-devkitc-1-n16r8It uses the REST API from derhuerst https://github.com/derhuerst/bvg-rest to get information about active rides on a certain suburban or subway line and displays the station where the train arrives next.
Features
- Wi-Fi provisioning
- HTTPS OTA firmware update check
- regular SNTP time sync
- capacitive touch
- NeoPixel LED control
- display live train data
- startup firmware version display on the pseudo 7-segment LEDs
Software notes
- Machine-specific OTA and upload settings are not tracked. Copy
sw/secrets.example.envtosw/secrets.env; the file is ignored by git and is used by the build and upload helpers. sw/tools/generate_ota_secrets.shgenerates the ignored firmware header fromsw/secTARGET_GIT_REPO_DIR=/path/to/fw_ota.rets.env.sw/upload.shruns this automatically before building.- If plain HTTP firmware upload/update is enabled for experiments, use it only on a trusted local network. Do not expose unauthenticated HTTP OTA to the internet.
sw/upload.shis a local release helper. It incrementssw/version.txt, buildsfirmware.bin, copies it into a separate OTA Git repository, commits it there, and pushes that OTA repository. PutTARGET_GIT_REPO_DIRinsw/secrets.envor pass the OTA repo path as the first argument. If HTTPS push needs a token, setUPLOAD_GIT_TOKENthere too.
Scaling
The PCB has been designed to be minimal in size to reduce manufacturing cost. It can be scaled using the KiCad IPC API. This requires KiCad 9 and above. The IPC API has some quirks. Most important, it needs to be enabled in the KiCad settings.
Pictures
The photos currently show only the manufactured V1 hardware. The current KiCad revision is untested.
V1 manufactured board

Parts
332| Qty | Value | Footprint | References |
|---|---|---|---|
| 320 | XL-1010RGBC-WS2812B | SK6805-EC10-000:SMD-4P,1.1x1.1mm | U1, U10, U11, U100, U101, U102, U103, U104, U105, U106, U107, U108, U109, U110, U111, U112 +304 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | ~ | ESP32_DEVKITC_32UE:cap_touch | U322, U323, U324 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U327 |
| 1 | C | Capacitor_SMD:CP_Elec_8x10 | C321 |
| 1 | ESP32-DEVKITC-32UE | ESP32_DEVKITC_32UE:ESPRESSIF_ESP32-DEVKITC-32UE | U321 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | SYM_EasterEgg_42x60mm | bb:Logo_Elektrojupp | SYM1 |
Similar boards
- 2 layers850.2 × 267.4 mm

- 2 layers131.8 × 51.8 mm

Bridge
nichtrami/led_tube
A LED Tube that works wireless and runs on a ESP32 with Arduino Framework
17 parts1Apache-2.0 - 2 layers76 × 61.5 mm

Bt jammer 1.0
Romemu1810-tech/bluetooth_jammer_experimento
Proyecto personal y experimental para el aprendizaje de electrónica, RF y comunicaciones Bluetooth, desarrollado con fines educativos y de investigación.
12 parts1 - 2 layers62 × 95 mm

MiAM PAMI V3 Stepper
14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards
37 parts - 2 layers100 × 70 mm

PCB Transporter
adli-syauqi/general-purpose-mobile-robot-pcb
KiCad hardware design for a custom ESP32 general-purpose mobile robot controller. This board was made to drive 4-wheel omni and mecanum transporter robots.
22 parts - 2 layers71.9 × 63.5 mm

Board mikrokontroller tars
arsya-stary/project-TARS
ini adalah project individual saya dan team saya untuk membuat robot TARS yang berada di dalam film INTERSTELLAR
11 parts - 2 layers150 × 90 mm

- 2 layers226 × 236.9 mm

Questions
How big is the Berlin bahn PCB?
It measures 153 × 107 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Berlin bahn use?
332 parts, built around the ESP32-DEVKITC-32UE, XL-1010RGBC-WS2812B-DZ and 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Berlin bahn KiCad files?
From the elektrojupp/berlin_bahn repository on GitHub, at the commit this page was made from: the board is hw/berlin_bahn.kicad_pcb and its schematic hw/20xLED_001.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Berlin bahn design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).