
MiAM SupervisorBoard
14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards

MiAM robotics repository for ESP32 based PAMIs and boards
MiAM PAMI V3 Stepper is an open-source printed circuit board by 14chanwa, from the 14chanwa/MiAM_robotics_ESP32 repository on GitHub. It is a 2-layer board of 62 × 95 mm with 37 parts on 62 nets, routed with 371 tracks and 35 vias.
It is built around the ESP32-DEVKITC-32UE and MT3608. Its parts include 9 connectors, 5 ICs, 3 resistors, 2 capacitors and 2 diodes. It belongs with the robots and motor control boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7, J8 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | MS1, MS2, MS3 |
| 3 | TCRT5000L_Breakout | MiAM_ESP32_Footprints:TCRT5000L_Breakout | J1, J4, J5 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3, C4 |
| 2 | 5V | MiAM_ESP32_Footprints:VoltageRegulator | U2, U4 |
| 2 | Conn_01x04_Male | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | MOT1, MOT2 |
| 2 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1, A2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J9 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | UART1 |
| 1 | Conn_01x02_Male | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | EMGBUT1 |
| 1 | Conn_01x03_Male | MiAM_ESP32_Footprints:Microruptor | J2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | SRV1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323_HandSoldering | D2 |
| 1 | ESP32-DEVKITC-32U | MiAM_ESP32_Footprints:ESP32U-ShieldPattern | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | MT3608 | MiAM_ESP32_Footprints:MT3608 | U3 |
| 1 | SSD1306_vertical | MiAM_ESP32_Footprints:SSD1306_vertical | J3 |
| 1 | SW_DPDT_x2 | MiAM_ESP32_Footprints:SS-12D11 | SW1 |
| 1 | Screw_Terminal_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BAT1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | U5 |

14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards

14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards

14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards

14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards

14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards

14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards

14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards

14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards

14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards

14chanwa/MiAM_robotics_ESP32
MiAM robotics repository for ESP32 based PAMIs and boards


nichtrami/led_tube
A LED Tube that works wireless and runs on a ESP32 with Arduino Framework

Romemu1810-tech/bluetooth_jammer_experimento
Proyecto personal y experimental para el aprendizaje de electrónica, RF y comunicaciones Bluetooth, desarrollado con fines educativos y de investigación.

adli-syauqi/general-purpose-mobile-robot-pcb
KiCad hardware design for a custom ESP32 general-purpose mobile robot controller. This board was made to drive 4-wheel omni and mecanum transporter robots.

arsya-stary/project-TARS
ini adalah project individual saya dan team saya untuk membuat robot TARS yang berada di dalam film INTERSTELLAR



crosbee/h2track
An telemetry tracker designed for an ESP32 with an easy api to integrate trackers and inputs with accompanying software to view live data and to pass inputs.
It measures 62 × 95 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the ESP32-DEVKITC-32UE and MT3608. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 14chanwa/MiAM_robotics_ESP32 repository on GitHub, at the commit this page was made from: the board is Electronics/eurobot2023/MiAM_PAMI_V3_Stepper/MiAM_PAMI_V3_Stepper.kicad_pcb and its schematic Electronics/eurobot2023/MiAM_ESP32/MiAM_ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask 14chanwa before reusing the design.