Skip to the content
2 layers66 × 73.1 mmMags, the printed circuit board in 3D

Flipper addons by Electronic Cats

Size
66 × 73.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
21
Pads
57
Tracks, vias
72, 19
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Apr 2023
Updated
12 Oct 2026

Overview

Mags is an open-source printed circuit board by ElectronicCats, from the ElectronicCats/flipper-addons repository on GitHub. It is a 2-layer board of 66 × 73.1 mm with 30 parts on 21 nets, routed with 72 tracks and 19 vias.

It is built around the TC4424EPA. Its parts include 6 connectors, 1 capacitor, 1 IC, 1 switch and 1 inductor. It belongs with the interfaces and adapters and radio and wireless boards of this library.

Main components

1

README

MARAUDER_SPOOF/README.md

Marauder Spoof

It is the mix of our famous Magspoof version with an ESP32S3 module loaded with Marauder A suite of WiFi/Bluetooth offensive and defensive tools for the ESP32

This addon adds the function of the famous Magspoof to Flipper, we use the same components and improvements that have our versions of magspoof, now adapted to Flipper.

How does MagSpoof work?

  • Allows you to store all of your credit cards and magstripes in one device
  • Works on traditional magstripe readers wirelessly (no NFC/RFID required)
  • Can disable Chip-and-PIN (code not included)
  • Correctly predicts Amex credit card numbers + expirations from previous card number (code not included)
  • Supports all three magnetic stripe tracks, and even supports Track 1+2 simultaneously
  • Easy to build using Arduino or other common parts
  • MagSpoof can be used as a traditional credit card and simply store all of your credit cards (and with modification, can technically disable chip requirements) in various impressive and exciting form factors, or can be used for security research in any area that would traditionally require a magstripe, such as readers for credit cards, drivers licenses, hotel room keys, automated parking lot tickets, etc.

Parts

30
QtyValueFootprintReferences
3G***kibuzzard-6488EEAFkibuzzard-6488EEAF, kibuzzard-6488EEAF, kibuzzard-6488EEAF
2CoilConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J6
2G***kibuzzard-6488F75Akibuzzard-6488F75A, kibuzzard-6488F75A
2G***kibuzzard-649DB344kibuzzard-649DB344, kibuzzard-649DB344
110uFCapacitor_SMD:C_0603_1608MetricC1
130t_30mmLibrary:Coil_30t_30mm_0.2_0.2_0.6_0.3L1
1Conn_01x08_SocketConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_HorizontalJ3
1Conn_01x08_SocketConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ4
1Conn_01x10_SocketConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_HorizontalJ2
1Conn_01x10_SocketConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ5
1G***kibuzzard-648B921Bkibuzzard-648B921B
1G***kibuzzard-648B9410kibuzzard-648B9410
1G***kibuzzard-648B91FCkibuzzard-648B91FC
1G***kibuzzard-648B93B1kibuzzard-648B93B1
1G***kibuzzard-648B923Fkibuzzard-648B923F
1G***kibuzzard-648B93EFkibuzzard-648B93EF
1G***kibuzzard-648B93E0kibuzzard-648B93E0
1G***kibuzzard-648B91CBkibuzzard-648B91CB
1G***kibuzzard-648B93BFkibuzzard-648B93BF
1G***kibuzzard-648B93D2kibuzzard-648B93D2
1G***kibuzzard-648B922Fkibuzzard-648B922F
1G***kibuzzard-648B91E6kibuzzard-648B91E6
1G***kibuzzard-648B9401kibuzzard-648B9401
1Onfootprintsg:JS102011SAQNSW1
1TC4424Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1

More from ElectronicCats/flipper-addons

8
  • 2 layers67 × 28 mmMarauder, the printed circuit board in 3D

    Marauder

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    57 parts133
  • 4 layers67 × 31.3 mmFlipper subg, the printed circuit board in 3D

    Flipper subg

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    47 parts133
  • 2 layers67 × 74.7 mmMarauder spoof, the printed circuit board in 3D

    Marauder spoof

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    46 parts133
  • 2 layers67 × 21.3 mmCANBUS Flipper, the printed circuit board in 3D

    CANBUS Flipper

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    42 parts133
  • 2 layers67 × 25 mmFLIPPER ETHERNET, the printed circuit board in 3D

    FLIPPER ETHERNET

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    38 parts133
  • 2 layers62.8 × 23.2 mmFLIPPER MOD BUS, the printed circuit board in 3D

    FLIPPER MOD BUS

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    27 parts133
  • 2 layers34 × 67 mmFlipper UWB, the printed circuit board in 3D

    Flipper UWB

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    21 parts133
  • 2 layers34 × 16 mmOBDII connector, the printed circuit board in 3D

    OBDII connector

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    9 parts133

Similar boards

  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers78.7 × 74.7 mm2channel mini speedy, the printed circuit board in 3D

    2channel mini speedy

    digmorepaka/speeduino-mini-2-channel

    A 75x78mm speeduino board featuring robotdyn mega 2560 pro microcontroller and all the basics needed to get a 2 channel setup. This is meant for simple engines like motorcycle 1cyls and V-Twins

    63 parts17
  • 2 layers93 × 100 mmGDRace little V2, the printed circuit board in 3D

    GDRace little V2

    NicoEFI/Speeduino-MicroEFI-V2-GDRace

    124 parts12
  • 2 layers85 × 100 mmNicoEfi 3, the printed circuit board in 3D

    NicoEfi 3

    NicoEFI/NicoEFI-ECU-Speeduino-mega2561

    NOT TESTED

    143 parts5
  • 2 layers100 × 100 mmCarteSolarTestBench, the printed circuit board in 3D

    CarteSolarTestBench

    mbriday/solarTestBench

    solar test bench for low power embedded system

    64 parts1
  • 4 layers80.3 × 86.4 mmKlxecu, the printed circuit board in 3D

    Klxecu

    JourneyMan61/klxecu

    Speeduino based ECM for the fuel injected KLX 250 and 300

    79 parts

Questions

How big is the Mags PCB?

It measures 66 × 73.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mags use?

30 parts, built around the TC4424EPA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mags KiCad files?

From the ElectronicCats/flipper-addons repository on GitHub, at the commit this page was made from: the board is FLIPPER_MAGSPOOF/mags.kicad_pcb and its schematic FLIPPER_CANBUS/CANBUS_Flipper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mags design in my own project?

Its repository states no licence, so its author keeps all rights: ask ElectronicCats before reusing the design.