Skip to the content
PCBKitNew board
2 layers100 × 50 mmRc2014-mystorm, the printed circuit board in 3D

Rc2014-mystorm

electrified/rc2014-mystorm

sigrok-cli --driver saleae-logic16 --config samplerate=20Mhz --channels 0=D0,1=D1,2=D2,3=D3,4=D4,5=D5,6=D6,7=D7,9=RD,10=WR,11=MREQ,13=M1 --samples 1M --output-file z80-fpga

Open in PCBKitView on GitHub.kicad_pcb
Size
100 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
107
Pads
268
Tracks, vias
835, 44
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 Jan 2026
Updated
3 Jan 2026

Overview

Rc2014-mystorm is an open-source printed circuit board by electrified, from the electrified/rc2014-mystorm repository on GitHub. It is a 2-layer board of 100 × 50 mm with 25 parts on 107 nets, routed with 835 tracks and 44 vias.

It is built around the SN74LVCC3245APW and LM1117-3.3. Its parts include 12 capacitors, 6 ICs and 5 connectors. It belongs with the FPGA and CPLD boards of this library.

Main components

2

README

README.md

Board to interface 3.3v FPGA board with RC2014

BOM

5x SN74LVCC3245ADW

LD1117S33TR

100nF 0805 capacitors

10μF 0805 capacitors

OE low = enable dir rc ->fpga

objcopy -Iihex -Obinary nascom32k_hexloadr.hex out.bin

sigrok-cli --driver saleae-logic16 --config samplerate=20Mhz --channels 0=D0,1=D1,2=D2,3=D3,4=D4,5=D5,6=D6,7=D7,9=RD,10=WR,11=MREQ,13=M1 --samples 1M --output-file z80-fpga

Silkscreen blunders

On the fpga connector, silscreen for M1 and RD should be swapped

https://bitbucket.org/gdevic/a-z80/src/6d6bd4838181ea9e088e6c1f7c68e4f11ce58183/host/basic_de1/basic_de1_fpga.sv?at=master&fileviewer=file-view-default

Parts

25
QtyValueFootprintReferences
10CCapacitors_SMD:C_0805_HandSolderingC3, C4, C5, C6, C7, C8, C9, C10, C11, C12
5SN74LVCC3245AHousings_SOIC:SOIC-24W_7.5x15.4mm_Pitch1.27mmU1, U2, U3, U4, U5
1100nFCapacitors_SMD:C_0805_HandSolderingC1
110uFCapacitors_SMD:C_0805_HandSolderingC2
1ConfigPin_Headers:Pin_Header_Straight_2x08_Pitch2.54mmJ2
1Conn_01x05Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mmJ3
1Ext PowerPin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJP1
1ExtraPin_Headers:Pin_Header_Straight_1x08_Pitch2.54mmJ6
1FPGA connectionConnectors_IDC:IDC-Header_2x25_Pitch2.54mm_StraightJ1
1LM1117-3.3TO_SOT_Packages_SMD:SOT-223-3_TabPin2U6
1RC2014 BUSrc2014:Pin_Header_Straight_1x39_Pitch2.54mm_NoSilkP1

The 24 most common of 25 parts.

Questions

How big is the Rc2014-mystorm PCB?

It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rc2014-mystorm use?

25 parts, built around the SN74LVCC3245APW and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rc2014-mystorm KiCad files?

From the electrified/rc2014-mystorm repository on GitHub, at the commit this page was made from: the board is rc2014-mystorm.kicad_pcb and its schematic rc2014-mystorm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rc2014-mystorm design in my own project?

Its repository states no licence, so its author keeps all rights: ask electrified before reusing the design.

Similar boards

  • 4 layers220 × 65 mmNixie Controller v2, the printed circuit board in 3D

    Nixie Controller v2

    DanielHeEGG/Nixie-Controller-v2

    Second generation universal nixie clock controller

    228 parts2CC-BY-SA-4.0
  • 4 layers150 × 100 mmVersion current, the printed circuit board in 3D

    Version current

    oomlout/oomlout_oomp_project_src

    158 parts
  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers52.5 × 36.6 mmESP8266-WebRadio, the printed circuit board in 3D

    ESP8266-WebRadio

    karawin/Ka-Radio

    A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

    52 parts453
  • 2 layers95.2 × 57.2 mmDomesdayDuplicator, the printed circuit board in 3D

    DomesdayDuplicator

    Domesday86/DomesdayDuplicator

    High-speed LaserDisc RF sampler

    66 parts325GPL-3.0
  • 2 layers189.5 × 204.9 mmSmartSpin2k Panelized, the printed circuit board in 3D

    SmartSpin2k Panelized

    doudar/SmartSpin2k

    Transform your spin bike into a Smart Trainer!

    749 parts292GPL-2.0
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 4 layers113.5 × 105.5 mmMultistepper, the printed circuit board in 3D

    Multistepper

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    243 parts208