

Sender
This is a repo where I post my PCB design projects.
- Size
- 78.6 × 100.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 45
- Pads
- 118
- Tracks, vias
- 286, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Feb 2026
- Updated
- 29 Mar 2026
Overview
Sender is an open-source printed circuit board by Eldorado8, from the Eldorado8/PCB-design repository on GitHub. It is a 2-layer board of 78.6 × 100.3 mm with 24 parts on 45 nets, routed with 286 tracks and 2 vias.
It is built around the BOB-12009 and LM317T. Its parts include 12 connectors, 3 resistors, 2 capacitors, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2BOB-12009
-ModulesSparkFun ElectronicsLM317T
TO-2200.003%Vout 0℃~+125℃@(Tj) 1 1.2V~37V 1.5A 40V 66dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2, J3, J4, J5, J6, J7 |
| 3 | JST_02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J8, J9, J10 |
| 3 | Resistor | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | BOB-12009 | BOB-12009:CONV_BOB-12009 | U2 |
| 1 | Barrel_Jack_PTH | PCM_SparkFun-Connector:Barrel_Jack_PTH | J1 |
| 1 | Capacitor_NP | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2 |
| 1 | Capacitor_PO | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J11 |
| 1 | JST_03 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J12 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM317T | PCM_Package_TO_SOT_THT_AKL:TO-220-3_Vertical | U1 |
| 1 | Ra-02 Ai Thinker | Ra-02 AI thinker:Ra-02 Ai Thinker | RF1 |
| 1 | potentiometer_3362P | PCM_SL_Devices:potentiometer_3362P | RV1 |
| 1 | ~ | PCM_SL_Devices:Buck_Convetor | B1 |
More from Eldorado8/PCB-design
4- 2 layers88.8 × 101.9 mm

- 2 layers111.6 × 103.1 mm

- 2 layers96.9 × 73.9 mm

- 2 layers215.9 × 95.3 mm

Similar boards
- 2 layers85.6 × 26 mm

Game boy pico link board
agtbaskara/game-boy-pico-link-board
An Open-Source USB to Gameboy Link Cable Adapter for Raspberry Pi Pico
6 parts51MIT - 2 layers70 × 90 mm

- 2 layers76.7 × 35.1 mm

Weather station
VincentKobz/diy-weather-station
The goal is to build from scratch a small intelligent weather station that can be connected to IOT networks.
14 parts2MIT - 2 layers65 × 56 mm

- 2 layers39.5 × 30.5 mm

- 2 layers101.9 × 70 mm

Car LED Controller Schematic V9 - KiCAD
hselomein/Car-LED-Controller
This is a private repo for my car led project
27 parts1 - 2 layers60 × 30 mm

GPIO circuit
JhouLab/Pi5WebcamRecorder
Records MV4 AVI video files from up to 4 simultaneous USB webcams on Raspberry Pi 5
7 parts1 - 16 layers566.8 × 155.3 mm

Total
michelkeijzers/fraxis
This project's personal goal is to learn more about ESP32 with ESP-IDF programming.
106 parts1MIT
Questions
How big is the Sender PCB?
It measures 78.6 × 100.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sender use?
24 parts, built around the BOB-12009 and LM317T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sender KiCad files?
From the Eldorado8/PCB-design repository on GitHub, at the commit this page was made from: the board is Sender/Sender.kicad_pcb and its schematic Led Circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sender design in my own project?
Its repository states no licence, so its author keeps all rights: ask Eldorado8 before reusing the design.