

Opl3module
- Size
- 100 × 90 mm
- Copper layers
- 4
- Thickness
- 1.62 mm
- Parts
- 143
- Nets
- 234
- Pads
- 844
- Tracks, vias
- 1,344, 126
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Dec 2023
- Updated
- 30 May 2025
Overview
Opl3module is an open-source printed circuit board by eivindbohler, from the eivindbohler/itxllama repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 90 mm with 143 parts on 234 nets, routed with 1,344 tracks and 126 vias.
Its parts include 48 capacitors, 30 resistors, 18 ICs and 6 connectors.
README
kicad/README.mdNotice:
This folder contains all files necessary to produce the ITX-Llama board from JLCPCB, or to continue development of the board.
However, I don't give any guarantees that everything is correct and working; you need to have a good understanding of Kicad and the PCB/assembly ordering process - and check everything yourself.
Parts
143| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 0.1uF | llama_shared:C_0402_1005Metric | C1, C2, C3, C10, C11, C12, C17, C18, C19, C20, C25, C26, C27, C28, C33, C34 +8 |
| 12 | 2.7nF | llama_shared:C_0603_1608Metric | C6, C7, C14, C15, C22, C23, C30, C31, C38, C39, C46, C47 |
| 12 | 6.8k | llama_shared:R_0402_1005Metric | R2, R3, R7, R8, R12, R13, R17, R18, R22, R23, R27, R28 |
| 12 | 8.2k | llama_shared:R_0402_1005Metric | R4, R5, R9, R10, R14, R15, R19, R20, R24, R25, R29, R30 |
| 7 | clipboard:e660483f-110c-4551-8ac1-c288611a6c17 | , , , , , , | |
| 6 | clipboard:2e2dceb0-db36-42e2-92e8-fd2a9aea1609 | , , , , , | |
| 6 | 10uF | llama_shared:C_0603_1608Metric | C8, C16, C24, C32, C40, C48 |
| 6 | 14.318MHz | llama_shared:XO_SMD7050 | XO1, XO2, XO3, XO4, XO5, XO6 |
| 6 | 33 | llama_shared:R_0402_1005Metric | R1, R6, R11, R16, R21, R26 |
| 6 | 600Ω@100MHz | llama_shared:R_0402_1005Metric | FB1, FB2, FB3, FB4, FB5, FB6 |
| 6 | 68pF | llama_shared:C_0402_1005Metric | C5, C13, C21, C29, C37, C45 |
| 6 | EXT_SYNTH | llama_shared:P_CONN_02X10 | J1, J2, J3, J4, J5, J6 |
| 6 | TL074 | llama_shared:U_SOIC-14_3.9x8.7mm_P1.27mm | U3, U6, U9, U12, U15, U18 |
| 6 | YAC512 | llama_shared:U_SOP-16_5.3x10.2mm_P1.27mm | U2, U5, U8, U11, U14, U17 |
| 6 | YMF262 | llama_shared:U_SOP-24_8.4x15.5mm_P1.27mm | U1, U4, U7, U10, U13, U16 |
| 4 | clipboard:e6be8a8c-9b60-4406-9cff-a0e8aa9a95d1 | , , , | |
| 4 | clipboard:438a7aaa-3c14-4320-8798-4d2be48215f5 | , , , | |
| 4 | clipboard:6edfe34b-1437-4917-b172-196aedd11b68 | , , , | |
| 4 | clipboard:72557e58-e2e9-44ef-b15c-a54b2305b7c1 | , , , |
More from eivindbohler/itxllama
1- 4 layers188 × 188 mm

Similar boards
- 4 layers60 × 75 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
143 parts1.7kApache-2.0 - 4 layers34.9 × 20.3 mm

- 4 layers155 × 69.8 mm

Displayunit
muccc/WomoLIN
Open Source Steuerung von LIN Bus Geräten im Caravan Bereich.
143 parts84GPL-3.0 - 4 layers85.6 × 54 mm

- 4 layers71.8 × 54.6 mm

- 4 layers95 × 95 mm

TelemetryOnboard
Spaceflight-Rocketry-Giessen-e-V/Telemetry
Open-Source Rocket Telemetry System Based On Radiocrafts RC232 Radio Modules
143 parts27CERN-OHL-S-2.0 - 4 layers50 × 50 mm

Insulin Pump PCB Schematic
UCBioengineering/open_source_insulin_pump
This repository contains software and hardware files for building an open source insulin pump. Files were created by the team at UC Bioengineering, University of Canterbury, Christchurch, New Zealand.
143 parts27 - 4 layers100 × 20 mm

Questions
How big is the Opl3module PCB?
It measures 100 × 90 mm and has 4 copper layers, 1.62 mm thick.
What parts does the Opl3module use?
143 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Opl3module KiCad files?
From the eivindbohler/itxllama repository on GitHub, at the commit this page was made from: the board is kicad/opl3module/opl3module.kicad_pcb and its schematic kicad/ITX-Llama.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Opl3module design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).