Skip to the content
2 layers118.1 × 24.1 mmCacheModule, the printed circuit board in 3D

KiCad board designs for EHBC

Size
118.1 × 24.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
88
Pads
600
Tracks, vias
1,080, 383
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
19 Jan 2024
Updated
10 Nov 2024

Overview

CacheModule is an open-source printed circuit board by ehbc-project, from the ehbc-project/ehbc-proto1-board repository on GitHub. It is a 2-layer board of 118.1 × 24.1 mm with 28 parts on 88 nets, routed with 1,080 tracks and 383 vias.

It is built around the 24LC00/P and 74LVC1G139DCU. Its parts include 16 capacitors, 9 ICs, 1 resistor and 1 connector.

Main components

2

Parts

28
QtyValueFootprintReferences
16100uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16
7CY7C1041DPackage_SO:TSOP-II-44_10.16x18.41mm_P0.8mmU2, U3, U4, U6, U7, U8, U9
110kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
124LC00Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
174LVC1G139Package_SO:SSOP-8_3.9x5.05mm_P1.27mmU1
1WP_CFGResistor_SMD:R_0402_1005MetricTP1
1~m68k-hbc-conn:SIMM80_CardEdgeJ1

More from ehbc-project/ehbc-proto1-board

3
  • 4 layers254 × 254 mmProto1, the printed circuit board in 3D

    Proto1

    ehbc-project/ehbc-proto1-board

    KiCad board designs for EHBC

    174 parts
  • 6 layers304.8 × 243.8 mmM68k hbc, the printed circuit board in 3D

    M68k hbc

    ehbc-project/ehbc-proto1-board

    KiCad board designs for EHBC

    72 parts
  • 2 layers59.7 × 61 mmCPLDProg, the printed circuit board in 3D

    CPLDProg

    ehbc-project/ehbc-proto1-board

    KiCad board designs for EHBC

    12 parts

Similar boards

  • 4 layers273 × 178 mmPico thing, the printed circuit board in 3D

    Pico thing

    markrvmurray/pico-thing

    An 8-bit MC6809E / HD6309E single-board computer with a pair of Raspberry Pi Pico 2 (RP2350 / Pimoroni PGA2350) modules acting as intelligent bus peripherals, a 1–2 MB banked-RAM DAT/MMU, a 40-pin PATA hard-disk…

    206 parts1BSD-2-Clause
  • 6 layers150 × 130 mmRadCheck SDRAM, the printed circuit board in 3D

    RadCheck SDRAM

    jmh8231-Dev/agissat-hw-2025

    AgisSAT-Hardware

    323 parts
  • 2 layers140 × 100 mmNeuromorphic retina encoder pcb pre 3d refresh, the printed circuit board in 3D

    Neuromorphic retina encoder pcb pre 3d refresh

    RyanHailey21/neuromorphic-retina-encoder-pcb

    Hardware-accelerated neuromorphic vision encoder and closed-loop motor reflex PCB system built around the Raspberry Pi RP2040 and a 16-neuron hardware Leaky Integrate-and-Fire (LIF) analog spiking neural network.

    166 parts
  • 6 layersOutput LED, the printed circuit board in 3D

    Output LED

    wickerwaka/nuBoard

    Verified 2026-09-24 with KiCad 10.0.6. Open nuBoard.kicadpcb in this directory to inspect the result. This is a PCB-only candidate, separate from the main-board schematic and PCB.

    5 parts1
  • 4 layers35 × 16 mmBitmagic basic, the printed circuit board in 3D

    Bitmagic basic

    esden/bitmagic

    Open Source Logic Analyzers and data Syphons

    37 parts92
  • 2 layers14.5 × 8.4 mmProject soic8-stemmaqt mod, the printed circuit board in 3D

    Project soic8-stemmaqt mod

    fgervais/project-soic8-stemmaqt-mod

    Console modchip style flexpcb to add a Stemma QT connector on an SOIC-8 EEPROM

    2 parts18
  • 4 layers66 × 61 mmBaseband, the printed circuit board in 3D

    Baseband

    wnmusic/simpleFE

    A very low cost mixed front end (ADC, DAC, SDR)

    145 parts5GPL-2.0

Questions

How big is the CacheModule PCB?

It measures 118.1 × 24.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CacheModule use?

28 parts, built around the 24LC00/P and 74LVC1G139DCU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CacheModule KiCad files?

From the ehbc-project/ehbc-proto1-board repository on GitHub, at the commit this page was made from: the board is projects/CacheModule/CacheModule.kicad_pcb and its schematic projects/CPLDProg/CPLDProg.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CacheModule design in my own project?

Its repository states no licence, so its author keeps all rights: ask ehbc-project before reusing the design.