Skip to the content
2 layers72 × 82.7 mmPanel, the printed circuit board in 3D

Because it's cheaper than 4 layers. Yes, seriously.

Size
72 × 82.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
126
Pads
357
Tracks, vias
714, 252
Pours
63
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 May 2025
Updated
25 Aug 2026

Overview

Panel is an open-source printed circuit board by efogtech, from the efogtech/endgame-trackball-hardware repository on GitHub. It is a 2-layer board of 72 × 82.7 mm with 42 parts on 126 nets, routed with 714 tracks and 252 vias.

It is built around the AFH34-S08FIA-1H and EC05E1220401.

Main components

2

README

README.md

Endgame Trackball (hardware)

RevisionTypeRGB LEDsConsumption (idle/sleep)C‑to‑C cable supportAdditional exposed pins*Notes
rev3medium batch🔴🔴 480/130 uA⚠️❌Doesn't support the new (latest) encoders without a firmware modification.
rev4large batch🟢🔴 440/110 uA⚠️❌—
rev5transitional🟢🟢 110/60 uA✅❌Restarts when USB power lost.
rev6transitional🟢🟢 95/50 uA✅⚠️The exposed pins are not very convenient to use.
rev7final🟢🟢 95/50 uA✅✅The AXP2585 charging IC has got discontinued.
rev8transitional🟢?/? uA✅✅Specifications are to be measured. Has a hardware issue. Can't work without a battery.
rev9transitional🟢?/? uA✅✅Specifications are to be measured. Has the same hardware issue.
rev10final🟢?/? uA✅✅Not in production yet.

*Additional 3 GPIOs for arbitrary user modifications.

image
Why 6 layers?

Because it's cheaper than 4 layers. Yes, seriously.

Stackup

JLC06161H-3313

Also see

Parent repo: https://github.com/efogtech/endgame-trackball

Parts

42
QtyValueFootprintReferences
21AFH34-S08FIA-1Heasyeda2kicad:FPC-SMD_8P-P0.50_JS_AFH34-S08FIA-1HENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY, ENC.ANY +5
21EC05E1220401easyeda2kicad:SW-SMD_EC05E1220401SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1 +5

More from efogtech/endgame-trackball-hardware

6
  • 6 layers65 × 85 mmTrackball, the printed circuit board in 3D

    Trackball

    efogtech/endgame-trackball-hardware

    Because it's cheaper than 4 layers. Yes, seriously.

    260 parts26
  • 6 layers29.8 × 12 mmDongle, the printed circuit board in 3D

    Dongle

    efogtech/endgame-trackball-hardware

    Because it's cheaper than 4 layers. Yes, seriously.

    23 parts26
  • 2 layers15 × 27.5 mmPaw3805-bb, the printed circuit board in 3D

    Paw3805-bb

    efogtech/endgame-trackball-hardware

    Because it's cheaper than 4 layers. Yes, seriously.

    12 parts26
  • 2 layers15 × 27.5 mmPaw3395-bb, the printed circuit board in 3D

    Paw3395-bb

    efogtech/endgame-trackball-hardware

    Because it's cheaper than 4 layers. Yes, seriously.

    10 parts26
  • 6 layers15 × 27.5 mmPmw3610 bb, the printed circuit board in 3D

    Pmw3610 bb

    efogtech/endgame-trackball-hardware

    Because it's cheaper than 4 layers. Yes, seriously.

    9 parts26
  • 2 layers24 × 9 mmEncoders upgrade, the printed circuit board in 3D

    Encoders upgrade

    efogtech/endgame-trackball-hardware

    Because it's cheaper than 4 layers. Yes, seriously.

    2 parts26

Similar boards

  • 4 layers44.5 × 50.6 mmKompic Mk1b, the printed circuit board in 3D

    Kompic Mk1b

    porupski/kompic-wearable

    Compact Open Multi-sensor Platform & Apparat.

    149 parts3GPL-3.0
  • 2 layers180.5 × 133.5 mmNrsk right, the printed circuit board in 3D

    Nrsk right

    0x0c/spltnrskb

    KLE レイアウト(kle/left.json、kle/right.json)から生成した、左右分割・有線接続のキーボード基板です。 KiCad 10 のプロジェクト(回路図と配線済み基板)、製造用ガーバー、BOM、QMK ファームウェア設定を含みます。筐体のデータ(アクリルのレーザーカット用 DXF/SVG と 3D プリント用 STL)も入っています。

    135 parts1
  • 2 layers80 × 40 mmCryptick token pcb, the printed circuit board in 3D

    Cryptick token pcb

    alphaseneca/cryptick-token-pcb

    Hardware schematics, 2-layer PCB layout, and manufacturing files for Cryptick Token — the 100% open-source biometric hardware security key and cryptographic hardware enclave.

    56 partsMIT
  • 2 layers42 × 42 mmSportsWatch, the printed circuit board in 3D

    SportsWatch

    HaydenGillen/SportsWatch

    This GPS watch project began from my interest in building a custom fitness device that records accurate run and cycle data and allows users to create and implement their own features.

    49 parts
  • 2 layers21.3 × 20.3 mmEncoder wheel-45deg, the printed circuit board in 3D

    Encoder wheel-45deg

    conol-ai/openwalkietalkie

    OpenMicroDial firmware — Rust/embassy on SiFli SF32LB52 (LilyGo T-Display SF32 dev board)

    4 parts3MIT
  • 2 layers30 × 50 mmModuleV400, the printed circuit board in 3D

    ModuleV400

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    42 parts1.1k
  • 2 layers139.7 × 64.8 mmSprig console, the printed circuit board in 3D

    Sprig console

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    42 parts1.1kMIT

Questions

How big is the Panel PCB?

It measures 72 × 82.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Panel use?

42 parts, built around the AFH34-S08FIA-1H and EC05E1220401. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Panel KiCad files?

From the efogtech/endgame-trackball-hardware repository on GitHub, at the commit this page was made from: the board is encoders-upgrade/panel.kicad_pcb and its schematic dongle-1k/dongle.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Panel design in my own project?

Its repository states no licence, so its author keeps all rights: ask efogtech before reusing the design.