Skip to the content
4 layers100 × 106 mmDelivery robot 1, the printed circuit board in 3D

Delivery robot KiCad PCB project and reusable 3.3 V LDO module

Size
100 × 106 mm
Copper layers
4
Thickness
1.6 mm
Parts
181
Nets
127
Pads
554
Tracks, vias
1,310, 539
Pours
40
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Oct 2026
Updated
29 Oct 2026

Overview

Delivery robot 1 is an open-source printed circuit board by ECE49022Team22, from the ECE49022Team22/delivery-robot-pcb repository on GitHub. It is a 4-layer board of 100 × 106 mm with 181 parts on 127 nets, routed with 1,310 tracks and 539 vias.

It is built around the SN74LVC2G17DBVR, SN74LV1T125DBVR-TP and TPS56637RPAR, with the INA237AIDGSR, USBLC6-2SC6 and SN74LVC1T45DBVRE4 among its other parts. Its parts include 57 capacitors, 52 resistors, 18 connectors, 13 diodes and 12 ICs. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

12

README

README.md

Delivery Robot PCB

KiCad design files for the ECE49022 Team 22 senior design delivery robot control board.

This repository is the shared workspace for the board schematic, PCB layout, project libraries and design documentation.

System overview

The current schematic includes an STM32F091RC microcontroller core, programming/debug and UART headers, reset and boot circuitry, clock and decoupling components, test points, and power conversion from 12 V to 5 V and 3.3 V. The 12 V input has a fuse, a reverse-battery P-FET, a TVS and a battery-voltage sense. The board also feeds four 5 V peripheral ports, a latch servo (half-duplex UART plus a fused battery feed), two MDD20A motor channels and two encoders, and links to the Raspberry Pi 5 (UART, AUX enable from the Pi 3V3, STM32 reset and BOOT0). An INA237 measures battery current on an off-board shunt (firmware counts charge) in the battery negative lead, and a buffered 5 V data line drives the payload-compartment WS2812B interior light.

The IMU (BNO085) is not on this board; it is wired to the robot off-board.

Getting started

  1. Install KiCad 10 with its standard symbol and footprint libraries.
  2. Clone this repository.
  3. Open delivery_robot_1.kicad_pro in KiCad Manager.
  4. Open delivery_robot_1.kicad_sch to view the complete schematic. Use the Schematic Hierarchy panel to navigate between sheets.

Custom symbol and footprint libraries are included and registered in the project library tables. Keep the directory structure intact so project-relative library paths resolve.

Repository contents

PathPurpose
delivery_robot_1.kicad_proActive KiCad project settings
delivery_robot_1.kicad_schMain board schematic
Buck_5V_2A.kicad_schHierarchical 12 V to 5 V, 2 A buck sheet (TPS54202H, U3)
Buck_5V_6A.kicad_schHierarchical 12 V to 5 V, 6 A buck sheet (TPS56637, U2), feeds the Pi 5
Buck_5V_6A_AUX.kicad_schSecond 12 V to 5 V, 6 A buck sheet (TPS56637, U5), +5V_AUX rail
LDO_3V3.kicad_schHierarchical 3.3 V power supply sheet
Pi5_Interface.kicad_schRaspberry Pi 5 link J13 (6-pin JST XH: UART via R12/R13 1k, GND, Pi 3V3 for the AUX enable, STM32 reset Q2, BOOT0) and Pi power output J14
GPIO_Breakout.kicad_sch2x8 2.54 mm expansion header J8 with spare MCU pins only: 1 +3V3, 2/16 GND, ADC (PC0/PA1/PA4), SPI2 (PB13 SCK, PC2 MISO, PB15 MOSI, PB9 CS), PWM (PC6/PC7), USART3 (PC10/PC11), I2C1 (PB6/PB7, now a shared bus with on-board 4.7k pull-ups R56/R57 and the INA237 U13 at 0x40). Unused MCU pins are no-connect.
Power_Indicators.kicad_schGreen power LED per rail (+12V, +5V_PI, +5V_AUX, +5V_SYS, +3V3) and yellow STM32 debug LEDs (PA5, PB12, PB14)
Motor_Control.kicad_schMDD20A driver terminals (J6, J16) and encoder terminals (J7, J15) for two motors, PWM pull-downs, PTC on each driver ground, encoder buffers U9/U10 (74LVC2G17) with 1k + 1 nF filters, PTC-protected encoder supplies, USBLC6-4SC6 ESD arrays U6 (J6 + J16) and U7 (J7 + J15), STM32 pin table
Test_Points.kicad_schPower test points: J5 1x06 2.54 mm header (+12V, GND, +5V_AUX, +5V_SYS, +3V3, +3.3VA) and TP3 scope GND loop
Input_Protection.kicad_schReverse-battery P-FET Q1 with gate clamp, SMBJ16A TVS D13 on +12V, battery-voltage divider to PA0
AUX_Outputs.kicad_schFour +5V_AUX peripheral ports J18-J21 (top-entry JST XH), one 1.5 A PTC each
Servo_Interface.kicad_schLatch servo port J17 (fused battery feed for an external buck, half-duplex UART through U8 SN74LVC1T45)
Battery_Monitor.kicad_schBattery current monitor: U13 INA237 on an off-board 50 A / 75 mV shunt in the battery - lead (Kelvin sense on J23), 10R/100 nF input filter, I2C1 on PB6/PB7 at 0x40, ALERT to PB4, VBUS on +12V
Interior_Light.kicad_schPayload-compartment WS2812B light J24 (3-pin top-entry JST XH): +5V_AUX through PTC F12, U14 SN74LV1T125 buffers PB5 (SPI1_MOSI) data to 5 V, D16 ESD
delivery_robot_1.pdfPlot of all schematic sheets, regenerated automatically on every schematic commit
tools/hooks/Git hooks (pre-commit regenerates the schematic PDF)
libs/Project libraries: custom buck converter symbols/footprints, and project_symbols.kicad_sym (STM32F091RCTx and Crystal_GND24 frozen at the versions this design uses)
LDO_KiCad/Reusable LDO example, libraries and footprint review
sym-lib-table, fp-lib-tableProject-specific library configuration
docs/Subsystem documentation and design notes
validation/Connectivity checks and reference netlist
system-ERC-report.txtSaved electrical rules check results
system-netlist.xmlExported system connectivity
system-preview/Rendered schematic sheets
received-project-settings/Archived initial settings; not the active project

Power supply details are documented in docs/power-supply.md. Earlier simulation notes are in STM32-LDO-design.md.

The 2026-10-15 design review changes are summarized in docs/design-review-2026-10-15.md. The 2026-10-27 battery current monitor and interior light are described in docs/design-change-2026-10-27.md.

Component-selection rationale is in docs/passive-selection-review.md, docs/clock-selection.md and docs/fuse-selection.md. The fuse selection includes both the PCB-mounted holder and its separately purchased insert.

Design status

Schematic: ERC is clean (0 errors, 0 warnings). PCB: 100 x 100 mm, 4 layers with an In1 GND plane. The board was fully routed as of commit 789cabe (2026-10-26), including outer-layer GND pours with stitching vias and widened high-current paths.

The feat/battery-monitor-interior-light branch (2026-10-27) added 18 parts: U13, U14, J23, J24, F12, D16, R54-R60 and C52-C56. They are placed and routed. DRC is clean, with 0 unconnected and 0 schematic parity issues. Layout notes are in docs/design-change-2026-10-27.md.

The saved ERC report and netlist (system-ERC-report.txt, system-netlist.xml) were regenerated on 2026-10-28 with KiCad 10.0.6 for the INA237 / 5.10 V change (ERC: 0 errors, 0 warnings). validation/verify_2026_10_27.py checks the branch against the netlist of its parent commit. validation/verify_integration.py checks against the older October 5 connectivity.

Saved reports describe the checked revision. Regenerate them after relevant design changes.

Team workflow

  • Use the active delivery_robot_1 project for board work.
  • Pull current changes before editing and coordinate ownership of schematic sheets and the PCB.
  • Work on branches and review changes before merging.
  • Save files in KiCad before committing. Include required project-local libraries with design changes.
  • Run ERC after schematic changes and DRC after layout changes. Review outstanding findings before ordering boards.
  • Enable the repository hooks once per clone with git config core.hooksPath tools/hooks. The pre-commit hook then re-plots delivery_robot_1.pdf from the staged schematic files and adds it to any commit that changes a .kicad_sch or .kicad_pro file. It needs KiCad installed; set KICAD_CLI if kicad-cli is not in the default location.

Editing locks, local UI settings and automatic backups are excluded from Git. Edit the native KiCad sources directly; regenerating files from older scripts may overwrite manual changes.

Parts

181
QtyValueFootprintReferences
16100nFCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4, C9, C12, C13, C15, C19, C23, C30, C33, C34, C35, C50, C51
1110kResistor_SMD:R_0805_2012MetricR1, R5, R16, R25, R36, R39, R40, R41, R52, R53, R58
10100nF / 50V X7RCapacitor_SMD:C_0805_2012MetricC37, C38, C39, C41, C42, C49, C52, C53, C54, C56
7100kResistor_SMD:R_0805_2012MetricR6, R37, R43, R46, R59, R61, R62
71kResistor_SMD:R_0805_2012MetricR12, R13, R28, R29, R32, R33, R47
51.5A holdFuse:Fuse_1812_4532MetricF4, F5, F6, F7, F12
5100Resistor_SMD:R_0805_2012MetricR26, R27, R30, R31, R42
51nF / 50V C0GCapacitor_SMD:C_0805_2012MetricC40, C43, C44, C45, C46
547uFCapacitor_SMD:C_1210_3225MetricC11, C17, C32, C57, C58
5GREENLED_SMD:LED_0805_2012MetricD3, D4, D5, D6, D7
5M3MountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4, H5
40.2A holdFuse:Fuse_1206_3216MetricF8, F9, F10, F11
410uFCapacitor_SMD:C_1206_3216MetricC7, C8, C28, C29
4USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U6, U7, U11, U12
31.5kResistor_SMD:R_0805_2012MetricR18, R19, R20
31uF / 16V X7RCapacitor_SMD:C_0805_2012MetricC24, C47, C48
3681Resistor_SMD:R_0805_2012MetricR21, R22, R24
3YELLOWLED_SMD:LED_0805_2012MetricD8, D9, D11
210 / 1%Resistor_SMD:R_0805_2012MetricR54, R55
2100pFCapacitor_SMD:C_0805_2012MetricC10, C31
210nF / 100V X7RCapacitor_SMD:C_0805_2012MetricC26, C27
216pFCapacitor_SMD:C_0805_2012MetricC5, C6
220kResistor_SMD:R_0805_2012MetricR2, R14
23.3uHproject_footprints:L_Wuerth_WE-XHMI-7070L2, L3
24.7kResistor_SMD:R_0805_2012MetricR56, R57
24.7uFCapacitor_SMD:C_0805_2012MetricC20, C21
274LVC2G17Package_TO_SOT_SMD:SOT-23-6U9, U10
2D5V0L1B2WSDiode_SMD:D_SOD-323D14, D16
2TPS56637RPARproject_footprints:TI_RPA0010A_VQFN-HR-10_3x3mmU2, U5
1+5V_PITestPoint:TestPoint_Keystone_5000-5004_MiniatureTP1
110A / 32VDCFuse:Fuseholder_Blade_Mini_Keystone_3568F1
110uF / 10V X7RCapacitor_SMD:C_0805_2012MetricC25
110uF / 16V X7RCapacitor_SMD:C_0805_2012MetricC55
110uHInductor_SMD:L_TDK_VLS6045EX_VLS6045AFL1
111.5k / 1%Resistor_SMD:R_0805_2012MetricR9
113.7kResistor_SMD:R_0805_2012MetricR7
11uFCapacitor_SMD:C_0805_2012MetricC22
122.1kResistor_SMD:R_0805_2012MetricR38
1220uF 35VCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC36
122uFCapacitor_SMD:C_1210_3225MetricC14
1330Resistor_SMD:R_0805_2012MetricR60
135.7k / 0.1%Resistor_SMD:R_0805_2012MetricR8
14.75kResistor_SMD:R_0805_2012MetricR17
1442kResistor_SMD:R_0805_2012MetricR63
1511Resistor_SMD:R_0805_2012MetricR3
15A fastFuse:Fuse_Littelfuse-NANO2-451_453F3
1600RInductor_SMD:L_0805_2012MetricFB2
168pFCapacitor_SMD:C_0805_2012MetricC16
173.2kResistor_SMD:R_0805_2012MetricR15
175kResistor_SMD:R_0805_2012MetricR4
18MHzCrystal:Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mmY3
1AUX force-onConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ22
1AUX1 NotecardConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ18
1AUX2 LiDARConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ19
1AUX3 GNSSConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ20
1AUX4 IMUConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ21
1BAT54WSDiode_SMD:D_SOD-323D15
1BOOT0 jumperConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1DMN63D8LPackage_TO_SOT_SMD:SOT-23Q2
1Expansion headerConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ8
1GNDTestPoint:TestPoint_Keystone_5010-5014_MultipurposeTP3
1INA237AIDGSRPackage_SO:TSSOP-10_3x3mm_P0.5mmU13
1INTERIOR LIGHTConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ24
1Latch servoTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_HorizontalJ17
1MDD20A PWM1/DIR1/GNDTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_HorizontalJ6
1MDD20A PWM2/DIR2/GNDTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_HorizontalJ16
1MMSZ5242B 12VDiode_SMD:D_SOD-123D12
1Motor1 encoderConnector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_HorizontalJ7
1Motor2 encoderConnector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_HorizontalJ15
1Pi 5 linkConnector_JST:JST_XH_S6B-XH-A_1x06_P2.50mm_HorizontalJ13
1Pi 5 powerTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ14
1Power test pointsConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ5
1RESETButton_Switch_SMD:SW_SPST_PTS810SW1
1SHUNT SENSE: LOAD / BATTTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalJ23
1SMBJ16ADiode_SMD:D_SMBD13
1SN74LV1T125DBVRPackage_TO_SOT_SMD:SOT-23-5U14
1SN74LVC1T45DBVPackage_TO_SOT_SMD:SOT-23-6U8
1SQJ409EPPackage_SO:PowerPAK_SO-8L_SingleQ1
1STM32F091RCTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU1
1SWDConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1

The 178 most common of 181 parts.

Similar boards

  • 2 layers114.9 × 76 mmProtected power entry, the printed circuit board in 3D

    Protected power entry

    absmach/synth

    Open-source circuit compiler for engineers and AI agents

    84 parts29Apache-2.0
  • 4 layers60 × 70 mmControl board PCB, the printed circuit board in 3D

    Control board PCB

    arthur-wirjo/reaction-wheel-inverted-pendulum

    A custom-engineered Reaction Wheel Inverted Pendulum designed as a physical testbed for advanced modern control theory.

    77 partsMIT
  • 2 layers92 × 69 mmBase controller, the printed circuit board in 3D

    Base controller

    dy-ma/halloween26

    A small LED/resistor practice board used to learn KiCad schematic capture, footprints, routing, silkscreen, and Gerber export. It is not the tractor controller and was not intended for manufacture.

    64 partsCERN-OHL-P-2.0
  • 4 layers150 × 110 mmMV24 RevF1, the printed circuit board in 3D

    MV24 RevF1

    Rithvik-Vadlamani/guadaloop-power-electronics

    Selected Guadaloop power-board and levitation H-bridge designs and review packages

    63 parts
  • 4 layers160 × 161.8 mmAcquisition board, the printed circuit board in 3D

    Acquisition board

    open-ephys/oe-acquisition-board-gen3

    3rd Generation Open Ephys USB Acquisition Board

    360 parts1
  • 2 layers52.7 × 15.2 mmCh32v003 nav, the printed circuit board in 3D

    Ch32v003 nav

    emeb/ch32v003_lcd_nav

    24 partsMIT
  • 2 layers80 × 70 mmPd bench, the printed circuit board in 3D

    Pd bench

    kekoraa/usb-c-pd-bench-breakout

    USB-C PD trigger/breakout with selectable voltage requests and a routed two-layer KiCad PCB. Design-stage

    31 parts
  • 6 layers145 × 355 mmBackplane, the printed circuit board in 3D

    Backplane

    stockmann-lab/shim_amp_hardware_linear

    Hardware related to open-source shim amplifier development for MRI research

    529 parts2

Questions

How big is the Delivery robot 1 PCB?

It measures 100 × 106 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Delivery robot 1 use?

181 parts, built around the SN74LVC2G17DBVR, SN74LV1T125DBVR-TP, TPS56637RPAR and INA237AIDGSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Delivery robot 1 KiCad files?

From the ECE49022Team22/delivery-robot-pcb repository on GitHub, at the commit this page was made from: the board is delivery_robot_1.kicad_pcb and its schematic AUX_Outputs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Delivery robot 1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask ECE49022Team22 before reusing the design.