2 layers60 × 30 mm
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0
2 layers19.6 × 16.6 mm
LT5534 Breakout
ebeechsrc/LT5534_BreakoutA breakout board for the LT5534 RF power detector.
- Size
- 19.6 × 16.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 6
- Pads
- 26
- Tracks, vias
- 89, 16
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 26 May 2014
- Updated
- 26 Aug 2014
Overview
LT5534 Breakout is an open-source printed circuit board by ebeechsrc, from the ebeechsrc/LT5534_Breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 19.6 × 16.6 mm with 11 parts on 6 nets, routed with 89 tracks and 16 vias.
Its parts include 3 capacitors, 2 ICs, 1 resistor and 1 connector. It belongs with the interfaces and adapters and radio and wireless boards of this library.
README
README.mdLT5534_Breakout
Warning currently untested, may contain errors.
A breakout board for the LT5534 RF power detector.
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | VAL** | 10to7_sm_standard:2mmHole | 2mmHole_1, 2mmHole_2, 2mmHole_3, 2mmHole_4 |
| 1 | 0.1uF | 10to7_sm_standard:SM0603 | C1 |
| 1 | 100pF | 10to7_sm_standard:SM0402 | C2 |
| 1 | 1nF | 10to7_sm_standard:SM0402 | C3 |
| 1 | 47 Ohm | 10to7_sm_standard:SM0603 | R1 |
| 1 | CONN_4 | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | Coax | 10to7_connectors:U.FL | U2 |
| 1 | LT5534 | 10to7_sm_standard:SC70 | U1 |
Questions
How big is the LT5534 Breakout PCB?
It measures 19.6 × 16.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LT5534 Breakout use?
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LT5534 Breakout KiCad files?
From the ebeechsrc/LT5534_Breakout repository on GitHub, at the commit this page was made from: the board is hw/LT5534_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LT5534 Breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers103 × 30.5 mm
- 2 layers26 × 30 mm
Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
11 parts1kGPL-3.0 - 2 layers10 × 20 mm
2 connector Sensor Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
11 parts915 - 2 layers
- 2 layers47 × 33 mm
Sevensegment led display module
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
11 parts803MIT - 2 layers42.5 × 36.8 mm
Devboard
basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts743CC-BY-4.0