2 layers68.6 × 53.3 mm Stm32f4 uno, the printed circuit board in 3D

Stm32f4 uno

Size: 68.6 × 53.3 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 76
Nets: 117
Pads: 355
Tracks, vias: 1,048, 84
Pours: 1
Routed: Yes
KiCad: KiCad 8.0 (file 20240108)
Created: 8 Sep 2023
Updated: 28 Nov 2024

Overview

Stm32f4 uno is an open-source printed circuit board by easy-smart, from the easy-smart/stm32f4_uno repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 76 parts on 117 nets, routed with 1,048 tracks and 84 vias.

It is built around the STM32F407VGT6, SST26VF016BEUI-104I/SN and XL1509-5.0, with the AMS1117-3.3, 1N4148WT and 1N5819WS among its other parts. Its parts include 28 capacitors, 14 connectors, 11 resistors, 9 diodes and 4 ICs. It belongs with the STM32 boards of this library.

Main components

Parts

Qty	Value	Footprint	References
8	100n	Capacitor_SMD:C_0402_1005Metric	C102, C103, C104, C105, C106, C107, C108, C110
4	MountingHole_3.2mm	Arduino_MountingHole:MountingHole_3.2mm	MH1, MH2, MH3, MH4
4	STM32 GPIO	Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical	J101, J103, J104, J105
3	1u	Capacitor_SMD:C_0402_1005Metric	C109, C111, C112
3	?	Capacitor_THT:CP_Radial_D6.3mm_P2.50mm	C120, C504, C505
2	100n 16V	Capacitor_SMD:C_0402_1005Metric	C113, C301
2	200	Resistor_SMD:R_0402_1005Metric	R103, R401
2	22u 25V	Capacitor_SMD:C_0805_2012Metric	C401, C402
2	2u2 16V	Capacitor_SMD:C_0603_1608Metric	C116, C117
2	30p 50V	Capacitor_SMD:C_0603_1608Metric	C114, C115
2	330	Resistor_SMD:R_0402_1005Metric	R104, R105
2	5k1	Resistor_SMD:R_0402_1005Metric	R201, R202
2	8p2 50V	Capacitor_SMD:C_0603_1608Metric	C118, C119
1	100	Resistor_SMD:R_0402_1005Metric	R107
1	10k	Resistor_SMD:R_0402_1005Metric	R102
1	10u 50V	Capacitor_SMD:C_1206_3216Metric	C502
1	150	Resistor_SMD:R_0402_1005Metric	R106
1	1N4148WT	Diode_SMD:D_SOD-523	D107
1	1N5819WS	Diode_SMD:D_SOD-323	D105
1	1k5	Resistor_SMD:R_0402_1005Metric	R203
1	1u 50V	Capacitor_SMD:C_0805_2012Metric	C501
1	25MHz	Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm	Y101
1	32.768kHz	Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm	Y102
1	47	Resistor_SMD:R_0402_1005Metric	R101
1	47uF 10V	Capacitor_SMD:C_1206_3216Metric	C503
1	4u7 16V	Capacitor_SMD:C_0603_1608Metric	C101
1	600Ω@100MHz	Inductor_SMD:L_0805_2012Metric	L101
1	68uH 1A	Inductor_SMD:L_Sunlord_SWPA6045S	L501
1	AMS1117-3.3	Package_TO_SOT_SMD:SOT-223-3_TabPin2	U401
1	Analog	Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical	J110
1	Barrel_Jack	#Connector:CUI Devices PJ-102AH.pdf	J112
1	Conn_01x04	Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical	J111
1	Conn_ST_STDC14	#Connector_Debug:Amphenol ICC 20021511-00014T4LF	J1
1	Digital/PWM	Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical	J109
1	Digital/PWM	Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical	J102
1	Ethernet	Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical	J107
1	Jumper_2_Bridged	Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm	JP101
1	LED blue	LED_SMD:LED_0603_1608Metric	D104
1	LED green	LED_SMD:LED_0603_1608Metric	D101
1	LED green (PWR)	LED_SMD:LED_0603_1608Metric	D401
1	LED red	LED_SMD:LED_0603_1608Metric	D103
1	LED yellow	LED_SMD:LED_0603_1608Metric	D102
1	LOGO	#Logo:e-Logo 5mm	G***
1	Power	Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical	J106
1	SHOU HAN TYPE-C 16PIN 2MD(073) (C2765186)	#Connector:SHOU HAN TYPE-C 16PIN 2MD(073)	J201
1	SS210	Diode_SMD:D_SMA	D106
1	SS34	Diode_SMD:D_SMA	D501
1	SST26VF016BEUI-104I/SN	Package_SO:SOIC-8_3.9x4.9mm_P1.27mm	U301
1	STM32 GPIO	Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical	J108
1	STM32F407VGT6	Package_QFP:LQFP-100_14x14mm_P0.5mm	U101
1	XL1509-5.0	Package_SO:SOIC-8_3.9x4.9mm_P1.27mm	U501

Questions

How big is the Stm32f4 uno PCB?

It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Stm32f4 uno use?

76 parts, built around the STM32F407VGT6, SST26VF016BEUI-104I/SN, XL1509-5.0 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stm32f4 uno KiCad files?

From the easy-smart/stm32f4_uno repository on GitHub, at the commit this page was made from: the board is stm32f4_uno.kicad_pcb and its schematic 40V_to_5V.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stm32f4 uno design in my own project?

Its repository states no licence, so its author keeps all rights: ask easy-smart before reusing the design.

Category and platform

STM32

Project files

Show this board on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/boards/easy-smart-stm32f4-uno" title="Stm32f4 uno in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/boards/easy-smart-stm32f4-uno.jpg" alt="Stm32f4 uno" width="1200" height="900">

A picture that opens the board, for a README

[![Stm32f4 uno](https://pcbkit.io/embed/boards/easy-smart-stm32f4-uno.jpg?size=s)](https://pcbkit.io/boards/easy-smart-stm32f4-uno)

Source

Repository: easy-smart/stm32f4_uno
Board file: stm32f4_uno.kicad_pcb
Commit: e8f0ea0
Licence: Not stated

Similar boards

4 layers100 × 68 mm
DevKit
kaminaris/GigaESC

209 parts47
2 layers65 × 56 mm
Pi hat LoRa
Doenec/pi-hat
collection of different shields to be stacked in raspberry pi
80 parts1MIT
2 layers
House midget
Sharoun-Madoya/home_midget

167 partsMIT
2 layers99.9 × 79.3 mm
Led controller
azaslavskis/WLED-Controller
Simple project that takes care of LED strips and connect them using esp32 to home assistant interface
65 partsMIT
2 layers100 × 95 mm
RRFExtRP2040
nyarurato/RRFExtRP2040Board
DIY Duet3 Extension Board
92 parts
2 layers85 × 50 mm
UDP w5500
SameSameIndustry/STM32_UDP2CAN_controller
STM32G431 + WIZnet W5500(Ethernet) を使い、PC(Python)から UDP で直接 CAN バス上のアクチュエータ (DJI C610 ESC / TTL サーボ / 差動ワイヤ機構モータ) を制御するための、基板設計(KiCad)・ファームウェア (STM32CubeMX + CMake)・PC側ツール一式です。
98 parts
2 layers
ESP32 Dev V1.0
EmersonEE/My_KiCad

98 parts
2 layers57.9 × 30.7 mm
Top connector
ToonVanEyck/OpenFlap
The OpenFlap project aims to create a open source, affordable split-flap display for the makers and tinkerers of the world.
16 parts98