4 layers
4 layers
Top level easyphi
easy-phi/main25easy-phi
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 166
- Nets
- 100
- Pads
- 643
- Tracks, vias
- 1,291, 253
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 8 Oct 2013
- Updated
- 4 Feb 2015
Overview
Top level easyphi is an open-source printed circuit board by easy-phi, from the easy-phi/main repository on GitHub. It is a 4-layer board with 166 parts on 100 nets, routed with 1,291 tracks and 253 vias.
It is built around the SN65LVDM176DGK, AOZ1280CI and 24LC64(LX), with the MAX5924DEUB+, MAX5925DEUB+ and TPS7A4901DGN among its other parts. Its parts include 60 resistors, 50 capacitors, 30 ICs, 12 diodes and 3 transistors.
Main components
9
SN65LVDM176DGK
VSSOP-8-40℃~+85℃ 1.7ns@3.3V,10pF 2mA 3V~3.6V 8mA 8mA Bidirectional Tri-State VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
AOZ1280CI
SOT-23-6-40℃~+85℃ 1 1.2A 1.5MHz 1mA 3V~26V 800mV~26V Adjustable Buck Built-in No Overcurrent Protection、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type SOT-23-6 DC-DC Converters ROHSAlpha & Omega SemiconductorDC-DC Converters
24LC64(LX)
SOP-8-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 100 Years 1MHz 5ms 64Kbit Hardware write protection function、Noise suppression function I2C SOP-8 EEPROM ROHSlingxingicEEPROM
MAX5924DEUB+
MSOP-10-40℃~+85℃ 1 1V~13.2V MSOP-10 Surge Protection Devices (SPDs) ROHSMaxim Integrated (Analog Devices)Surge Protection Devices (SPDs)MAX5925DEUB+
MSOP-10-40℃~+85℃ 1 1V~13.2V MSOP-10 Surge Protection Devices (SPDs) ROHSMaxim Integrated (Analog Devices)Surge Protection Devices (SPDs)
TPS7A4901DGN
TSSOP8+36V, +150mA, Ultralow-Noise, Positive Linear RegulatorTexas InstrumentsUncategorised
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
FDD8780
TO-252-55℃~+175℃ 1 N-channel 1.44nF 12mΩ@4.5V 2.5V 25V 270pF 29nC@10V 355pF 50W 60A N-Channel TO-252 MOSFETs ROHSonsemiMOSFETs
MBRS340T3G
DO-214AB-55℃~+150℃ 1 Independent 3A 40V 500uA@40V 550mV DO-214AB Schottky Diodes ROHSTokmasSchottky Diodes
README
README.mdmain
easy-phi
Parts
166| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 100nF | SM0603_Capa | C10, C11, C14, C17, C21, C24, C25, C26, C29, C30, C32, C33, C34, C35, C36, C38 +13 |
| 14 | 680 | SM0603_Resistor | R36, R38, R39, R40, R41, R42, R45, R47, R49, R51, R55, R56, R58, R60 |
| 9 | 10k | SM0603_Resistor | R1, R6, R15, R16, R27, R28, R29, R34, R35 |
| 8 | 10uF | SM0603_Capa | C4, C12, C19, C23, C37, C45, C52, C53 |
| 7 | 100k | SM0603_Resistor | R17, R18, R19, R20, R21, R22, R52 |
| 7 | 220 | SM0603_Resistor | R37, R44, R46, R48, R50, R57, R59 |
| 7 | LED_RGB | CLV1A-FKB-CJ1M1F1BB7R4S3 | D3, D6, D7, D8, D9, D11, D12 |
| 7 | RLP1-600-800 | RLP1-600-800 | U11, U17, U18, U19, U20, U21, U23 |
| 6 | CONNEC_QMA_ANO_2622-4035 | connec_QMA | U22, U24, U25, U26, U27, U28 |
| 5 | 22pF | SM0603_Capa | C27, C28, C31, C47, C48 |
| 4 | 47k | SM0603_Resistor | R30, R31, R32, R33 |
| 4 | CARD_BORDER | card_border | U51, U52, U53, U54 |
| 4 | FILTER | SM0603_Resistor | FB1, FB2, FB3, FB4 |
| 3 | 100 | SM0603_Resistor | R12, R26, R43 |
| 3 | 10nF | SM0603_Capa | C3, C6, C18 |
| 3 | 22uF | SM0805 | C5, C13, C22 |
| 2 | 10 | SM0603_Resistor | R2, R3 |
| 2 | 1uF | SM0603_Capa | C1, C2 |
| 2 | 2k | SM0603_Resistor | R4, R8 |
| 2 | 39 | SM0603_Resistor | R23, R24 |
| 2 | 6k8 | SM0603_Resistor | R14, R25 |
| 2 | FDD8780 | DPAKGDS | Q2, Q3 |
| 2 | LED | SM0603_Resistor | D5, D10 |
| 2 | TROU_FIX | TROU_FIX_FP | U15, U16 |
| 1 | 0.03 | SM0805 | R9 |
| 1 | 120k | SM0603_Resistor | R11 |
| 1 | 12MHz | 7A-12MHz | X1 |
| 1 | 12k | SM0603_Resistor | R13 |
| 1 | 15k8 | SM0603_Resistor | R54 |
| 1 | 2-1825027-0 | 2-1825027-0 | U10 |
| 1 | 2.2uH | IND_NR6028 | L2 |
| 1 | 24LC64 | SO8E | U3 |
| 1 | 270 | SM0603_Resistor | R10 |
| 1 | 3.3V TVS | TVS_SMLVT | D2 |
| 1 | 32.768KHz | ABS25 | X2 |
| 1 | 390k | SM0603_Resistor | R7 |
| 1 | 49k9 | SM0603_Resistor | R53 |
| 1 | AOZ1280 | SOT23_6 | U6 |
| 1 | CONN_8 | SIL-8 | P1 |
| 1 | DM3D-SF(AS) | DMD3D-SF | J2 |
| 1 | JTAG_CONNEC | JTAG_20 | J1 |
| 1 | Logo | Logo | VAL |
| 1 | MAX5924D | uMAX-uSOP_10 | U1 |
| 1 | MAX5925D | uMAX-uSOP_10 | U2 |
| 1 | MBRS340T3G | SCHOTTKY_MBRS340 | D4 |
| 1 | MOS_P | SOT23GDS | Q1 |
| 1 | SAM3X8E | LQFP-144 | U7 |
| 1 | SN65LVDM176DGK | MSOP_8 | U9 |
| 1 | SN74LVC2G240DCTR | SM8 | U8 |
| 1 | TE-5650478-5 | TE-5650478-5 | U12 |
| 1 | TPS7A4901 | MSOP_8_PP | U5 |
| 1 | TVS 12V | TVS_SMAJ | D1 |
| 1 | USBLC6-2 | SOT23_6 | U4 |
| 1 | XXXXXX | SM0603_Resistor | R5 |
Questions
What parts does the Top level easyphi use?
166 parts, built around the SN65LVDM176DGK, AOZ1280CI, 24LC64(LX) and MAX5924DEUB+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Top level easyphi KiCad files?
From the easy-phi/main repository on GitHub, at the commit this page was made from: the board is Modules/Common Template/Current_Version/github/Kicad/top_level_easyphi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Top level easyphi design in my own project?
Its repository states no licence, so its author keeps all rights: ask easy-phi before reusing the design.
More from easy-phi/main
6- 4 layers
- 4 layers
- 4 layers
- 4 layers
- 4 layers145 × 127 mm
Similar boards
- 4 layers140 × 300 mm
LLC DCDC V5
BOAB235/Design_of_1200W_LLC_DCDC
In battery electric vehicles (BEVs) and 48 V mild-hybrid architectures, a high-voltage DC-DC converter steps the 300–400 V traction battery bus down to the 48 V auxiliary rail that powers lighting, HVAC blowers…
212 parts1 - 2 layers55 × 75 mm
Robot Controller
RaifeRiver/HalfLifeWeek1
A robot controller PCB I designed for hack club half life week 1.
79 parts - 6 layers90 × 90 mm
- 4 layers50 × 80 mm
- 2 layers39 × 39 mm
- 4 layers64 × 64 mm
Convey
kennito2035/convey
CONVEY: open 8-channel patient-isolated EEG/sEMG/ECG acquisition board (ADS1299, KiCad 10)
146 parts4CERN-OHL-S-2.0 - 4 layers49.8 × 49.8 mm
- 4 layers60 × 46 mm
AFE v1
auselia/afe_pcb
The first acoustic emission (AE) front-end board of Auselia. It turns the charge of a piezoelectric sensor into 14-bit samples and a wake-up signal.
167 parts