
Schematic Fuzz 1509B
devilmollusk/fuzz_e_neuron
this is a clone of the Fuzz Fixer build by PCB Guitar Mania with some fixes added and a cleaned up schematic

Controller v0 3 is an open-source printed circuit board by easilok, from the easilok/hidroponics-board repository on GitHub. It is a 2-layer board of 99.5 × 48.5 mm with 30 parts on 45 nets, routed with 263 tracks and 70 vias.
It is built around the WEMOS D1 MINI, AZ943-1CH-12DE and MPS2222A. Its parts include 7 resistors, 7 connectors, 5 capacitors, 5 diodes and 4 ICs. It belongs with the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0 | Resistor_SMD:R_0805_2012Metric | R3, R4, R5 |
| 2 | 0.1u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C3 |
| 2 | 0.33u | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | AZ943-1CH-12DE | LCP_Footprints:Relay_SPDT_ZETTLER_AZ943_Series_Form_C | RLY1 |
| 1 | Condutivity | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J7 |
| 1 | D | Diode_THT:D_DO-15_P10.16mm_Horizontal | D3 |
| 1 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D4 |
| 1 | D_Zener_x2_ACom_AKK | Package_TO_SOT_SMD:SOT-23 | D5 |
| 1 | EnvSensor | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J4 |
| 1 | Irrigation | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J3 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LM7809_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | MPS2222 | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | NodeMCU_ESP12E | LCP_Footprints:NodeMCU1.0_12-E | U2 |
| 1 | Power | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | PumpRelay | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J6 |
| 1 | QRSwitch | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Screen | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J2 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |

devilmollusk/fuzz_e_neuron
this is a clone of the Fuzz Fixer build by PCB Guitar Mania with some fixes added and a cleaned up schematic


WasabiMushyPeas/coilSafetyCircuit
An electromagnet safety circuit for Dr. Biedermann's Lab.

victovats/Modular_Relay_Board_PCB_TMR
Modular relay board designed for Toronto Metropolitan Robotics featuring 4 relay circuits that isolate high-voltage inputs from low-voltage control signals to prevent interference.

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems

alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

It measures 99.5 × 48.5 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the WEMOS D1 MINI, AZ943-1CH-12DE and MPS2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the easilok/hidroponics-board repository on GitHub, at the commit this page was made from: the board is controller/controller_v0_3.kicad_pcb and its schematic controller/controller_v0_3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask easilok before reusing the design.