Skip to the content
4 layers28 × 28 mmErace rx v2, the printed circuit board in 3D

ExpressLRS Receiver for the eRace-Cup. Features a 20x20mm mounting and 4 output channels

Size
28 × 28 mm
Copper layers
4
Thickness
1.6 mm
Parts
58
Nets
60
Pads
212
Tracks, vias
475, 144
Pours
12
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
6 Jul 2024
Updated
29 Nov 2024

Overview

Erace rx v2 is an open-source printed circuit board by eRace-Cup, from the eRace-Cup/erace-cup-receiver repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 28 × 28 mm with 58 parts on 60 nets, routed with 475 tracks and 144 vias.

It is built around the ESP32-C3, AMS1117-3.3 and ANT3216LL00R2400A. Its parts include 21 capacitors, 12 resistors, 6 connectors, 4 diodes and 3 inductors. It belongs with the ESP32 and RISC-V boards of this library.

Main components

3

Parts

58
QtyValueFootprintReferences
5100nCapacitor_SMD:C_0402_1005MetricC2, C3, C11, C12, C13
41µCapacitor_SMD:C_0402_1005MetricC1, C4, C6, C10
4~components:Solder PadP1, P2, P3, P4
310kResistor_SMD:R_0402_1005MetricR1, R2, R3
310nCapacitor_SMD:C_0402_1005MetricC5, C14, C16
322µCapacitor_SMD:C_0805_2012MetricC20, C26, C27
33.3kResistor_SMD:R_0402_1005MetricR5, R7, R11
21.2pFCapacitor_SMD:C_0402_1005MetricC19, C21
212nCapacitor_SMD:C_0402_1005MetricC7, C8
21kResistor_SMD:R_0402_1005MetricR4, R6
22N7002Package_TO_SOT_SMD:SOT-23Q1, Q2
233Resistor_SMD:R_0402_1005MetricR8, R12
25.1kResistor_SMD:R_0402_1005MetricR9, R10
2D_SchottkyDiode_SMD:D_SOD-323D2, D4
110µCapacitor_SMD:C_0603_1608MetricC9
115µHInductor_SMD:L_0603_1608MetricL5
12.0nInductor_SMD:L_0402_1005MetricL1
13.0nHInductor_SMD:L_0402_1005MetricL2
140MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1470nCapacitor_SMD:C_0603_1608MetricC15
1479480001components:ANT_47948-0001_MOLAE2
152MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1ANT3216LL00R2400Acomponents:1206 antennaAE1
1Conn_01x08_MountingPinConnector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_HorizontalJ1
1ESP32-C3Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mmU1
1Jumper_2_Small_Opencomponents:solder bridgeJP1
1USB_C_Receptacle_USB2.0_16Pcomponents:USB-CJ2
1greenLED_SMD:LED_0402_1005MetricD1
1redLED_SMD:LED_0402_1005MetricD3
1~components:buttonBN1
1~components:0402 RF FilterFL1
1~components:SX128xRF1

More from eRace-Cup/erace-cup-receiver

1
  • 4 layers28 × 28 mmErace rx v1, the printed circuit board in 3D

    Erace rx v1

    eRace-Cup/erace-cup-receiver

    ExpressLRS Receiver for the eRace-Cup. Features a 20x20mm mounting and 4 output channels

    53 partsBSD-3-Clause

Similar boards

  • 4 layers35.4 × 21.6 mmESP32-C3-V4, the printed circuit board in 3D

    ESP32-C3-V4

    Ans1S/esp32-c3-iot-sensor-board

    Open-source ESP32-C3 platform for ultra-low-power environmental sensor networks powered by recycled LiPo cells. Includes KiCad PCB, PlatformIO firmware (ESP-NOW + ThingSpeak), BME280/BME680 support, deep-sleep…

    57 parts6MIT
  • 2 layers119 × 121.9 mmGame board mini, the printed circuit board in 3D

    Game board mini

    Moritz-Dilg/MenschAergereDichNicht

    248 parts1MIT
  • 2 layers20 × 20 mmTux mini v01, the printed circuit board in 3D

    Tux mini v01

    tux-friend/ESP32-Tux

    Documentation for ESP32-Tux Dev Board

    40 parts1GPL-3.0
  • 4 layers35 × 50 mmControl board, the printed circuit board in 3D

    Control board

    rijn/smart-blind-control

    GPIO 6 will be pulled up on boot. Disable the JTAG by efuse.

    110 partsMIT
  • 2 layers26 × 26 mmEsp32tux mini, the printed circuit board in 3D

    Esp32tux mini

    tux-friend/tux-cube

    Physics Sensor Cube Tux³

    57 parts18GPL-3.0
  • 4 layers25.4 × 25.4 mmZeo1 devboard, the printed circuit board in 3D

    Zeo1 devboard

    zeodotdev/zeo-boards

    ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.

    90 parts3
  • 4 layers43 × 89 mmReflowControllerV2, the printed circuit board in 3D

    ReflowControllerV2

    walclu/smartReflow

    Repository for STM32WB55 based reflow toaster oven controller.

    99 parts15
  • 4 layers85 × 56 mmPslab mini, the printed circuit board in 3D

    Pslab mini

    fossasia/pslab-mini-hardware

    PSLab Mini Hardware https://pslab.io

    182 parts1.2kApache-2.0

Questions

How big is the Erace rx v2 PCB?

It measures 28 × 28 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Erace rx v2 use?

58 parts, built around the ESP32-C3, AMS1117-3.3 and ANT3216LL00R2400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Erace rx v2 KiCad files?

From the eRace-Cup/erace-cup-receiver repository on GitHub, at the commit this page was made from: the board is erace-rx-v2/erace-rx-v2.kicad_pcb and its schematic erace-rx-v1/erace-rx-v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Erace rx v2 design in my own project?

Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).