

Light sensor 01
Misc smart house hardware
- Size
- 45.7 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 11
- Pads
- 54
- Tracks, vias
- 120, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 25 Oct 2017
- Updated
- 11 Oct 2023
Overview
Light sensor 01 is an open-source printed circuit board by dzavalishin, from the dzavalishin/hardware repository on GitHub. It is a 2-layer board of 45.7 × 26 mm with 24 parts on 11 nets, routed with 120 tracks and 0 vias.
It is built around the LF412CN, 78L05 and GL5539. Its parts include 7 capacitors, 6 resistors, 2 ICs, 2 diodes and 1 connector. It belongs with the sensors and measurement boards of this library.
Main components
3LF412CN
PDIP-8-15V~15V 0℃~+70℃ 1.8mA 100pA 10V/us 1mV 2 25nV/√Hz@1kHz 3MHz 50pA 70dB 7uV/℃ PDIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input Amplifiers78L05
SOT-89-3-20℃~+120℃@(Tj) 1 1.7V 100mA 2mA 30V 40uV 49dB@(120Hz) 5V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsGL5539
插件,P=3mm-30℃~+70℃ 0.8 10MΩ 150V 20ms 30ms 50kΩ~100kΩ 540nm 插件,P=3mm Photoresistors ROHSSenba Sensing TechPhotoresistors
README
README.mdhardware
Misc smart house hardware, kicad designs.
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0,1 | Capacitors_SMD:C_1206_HandSoldering | C1, C2, C3, C4, C6 |
| 4 | Mounting_Holes:MountingHole_3mm | hole, hole, hole, hole | |
| 2 | 1N4148 | Diodes_SMD:D_SMA_Handsoldering | D1, D2 |
| 2 | 1k | Resistors_SMD:R_1206_HandSoldering | R4, R5 |
| 2 | 220k | Resistors_SMD:R_1206_HandSoldering | R1, R2 |
| 1 | 10k | Potentiometers:Potentiometer_Trimmer-Suntan-TSR-3386C | RV1 |
| 1 | 220,0 | SMD_Packages:SMD-2112_Pol | C5 |
| 1 | 47,0 | SMD_Packages:SMD-2112_Pol | C7 |
| 1 | 47k | Resistors_SMD:R_1206_HandSoldering | R6 |
| 1 | 47k | Potentiometers:Potentiometer_Trimmer-Suntan-TSR-3386C | RV2 |
| 1 | 78L05 | TO_SOT_Packages_THT:TO-92_Molded_Narrow | U2 |
| 1 | GL5539 | Discret:R1 | R3 |
| 1 | LF412CN | Housings_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | Pwr/Out | Pin_Headers:Pin_Header_Angled_1x03_Pitch2.54mm | J1 |
More from dzavalishin/hardware
12- 2 layers

- 2 layers156.2 × 86.4 mm

- 2 layers

- 2 layers124.5 × 81.3 mm

- 2 layers254 × 55.9 mm

- 2 layers71 × 140 mm

- 2 layers106.7 × 58.4 mm

- 2 layers108 × 77.5 mm

- 2 layers68.9 × 118.5 mm

- 2 layers155 × 58 mm

- 2 layers90.2 × 72.4 mm

- 2 layers20.3 × 200.7 mm

Similar boards
- 2 layers56.7 × 25.9 mm

Active Electrode
TallesSantosCUBoulder/EIT-Capstone-Project-2023
This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.
12 parts1MIT - 2 layers36.8 × 34.7 mm

Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 2 layers51.8 × 32.6 mm

C64-rf modulator replacement
mbarszcz-pcb/c64-rf-modulator-replacement
C64 Composite/S-Video RF Modulator Replacement
33 parts86MIT - 2 layers86.4 × 69.9 mm

- 2 layers106 × 95.4 mm

- 2 layers41.1 × 110.7 mm

- 2 layers99.1 × 63.5 mm

- 2 layers55.4 × 66 mm

Questions
How big is the Light sensor 01 PCB?
It measures 45.7 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Light sensor 01 use?
24 parts, built around the LF412CN, 78L05 and GL5539. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Light sensor 01 KiCad files?
From the dzavalishin/hardware repository on GitHub, at the commit this page was made from: the board is _Sensors/light_sensor_00/Light_sensor_01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Light sensor 01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask dzavalishin before reusing the design.