
LF412CN
Texas InstrumentsExtended
-15V~15V 0℃~+70℃ 1.8mA 100pA 10V/us 1mV 2 25nV/√Hz@1kHz 3MHz 50pA 70dB 7uV/℃ PDIP-8 FET Input Amplifiers ROHS
- Part id
- ti/LF412CN
- Category
- FET Input Amplifiers
- Package
- PDIP-8
- Pins
- 8
- In stock
- 37 at JLCPCB (C1346063)
- Used on
- 3 open-source boards
Overview
The LF412CN is a FET Input Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -15V~15V 0℃~+70℃ 1.8mA 100pA 10V/us 1mV 2 25nV/√Hz@1kHz 3MHz 50pA 70dB 7uV/℃ PDIP-8 FET Input Amplifiers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LF412CN, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 37 are in stock at JLCPCB (part C1346063). 3 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | OUTA | Output |
| 2 | INA- | Unspecified |
| 3 | INA+ | Unspecified |
| 4 | V- | Unspecified |
| 5 | INB+ | Unspecified |
| 6 | INB- | Unspecified |
| 7 | OUTB | Output |
| 8 | V+ | Unspecified |
Open-source boards using it
3- 2 layers

- 2 layers45.7 × 26 mm

- 2 layers56.7 × 25.9 mm

Active Electrode
TallesSantosCUBoulder/EIT-Capstone-Project-2023
This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.
12 parts1MIT
Parts like it
8TL072CP
PDIP-8-15V~15V 0℃~+70℃ 1.4mA 100pA 13V/us 18nV/√Hz@1kHz 18uV/℃ 2 3MHz 3mV 65pA 70dB Short-Circuit Protection、Built-in compensation、Latch-up suppression PDIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersTL081CP
DIP-8-15V~15V 0℃~+70℃ 1 1.4mA 13V/us 18nV/√Hz@1kHz 18uV/℃ 30pA 3MHz 3mV 5pA 86dB Short-Circuit Protection、Latch-up suppression DIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersTL071CP
PDIP-8-20V~-2.25V、2.25V~20V 0.5pA 0℃~+70℃ 1 1mV 20V/us 2uV/℃ 37nV/√Hz@1kHz 4.5V~40V 5.25MHz 65pA 80dB 937.5uA Short-Circuit Protection、EMI filtering/RF suppression PDIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersTL072IP
PDIP-8-15V~-5V、5V~15V -40℃~+85℃ 1.4mA 100dB 13V/us 18nV/√Hz@1kHz 18uV/℃ 2 3MHz 3mV 5pA 65pA Short-Circuit Protection、Built-in compensation、Latch-up suppression PDIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersTL072CN(LX)
DIP-8-40℃~+85℃ 1.4mA 10uV/℃ 13V/us 15nV/√Hz@1kHz 2 3.5MHz 30pA 3mV 40mA 5pA 86dB DIP-8 FET Input Amplifiers ROHSlingxingicFET Input AmplifiersTL082CP
DIP-8-20V~-2.25V、2.25V~20V 0℃~+70℃ 1.4mA 100pA 13V/us 18uV/℃ 2 30pA 37nV/√Hz@1kHz 3MHz 3mV 4.5V~40V 86dB Short-Circuit Protection、Latch-up suppression DIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersTL082IP
PDIP-8-15V~-5V、5V~15V -40℃~+85℃ 1.4mA 13V/us 18nV/√Hz@1kHz 18uV/℃ 2 30pA 3MHz 3mV 5pA 86dB Short-Circuit Protection、Latch-up suppression PDIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersLF351N/HG
DIP-8-18V~18V 0℃~+70℃ 1 1.8mA 100pA 200nA 20V/us 3MHz 3mV 85dB Short-Circuit Protection、Built-in compensation DIP-8 FET Input Amplifiers ROHSHGSEMIFET Input Amplifiers
Questions
Is there a KiCad symbol and footprint for the LF412CN?
Yes. The symbol is EasyEDA_Cloud:LF412CN and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LF412CN?
PDIP-8, with 8 pins. Its footprint is drawn on this page.
Where is the LF412CN datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LF412CN?
JLCPCB lists it as part C1346063, with 37 in stock; the sellers' links on this page open their listings.
What can replace the LF412CN?
Parts like it in the library: the TL072CP by Texas Instruments, the TL081CP by Texas Instruments, the TL071CP by Texas Instruments and the TL072IP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LF412CN?
3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.