Skip to the content
4 layers33 × 33.3 mmDrone, the printed circuit board in 3D

This is a collection of the KiCAD projects I have created to make a manual drone from scratch. I have not attempted get them manufactured (nor do I plan to), but it was good practice, a lot of fun, and a little annoying.

Size
33 × 33.3 mm
Copper layers
4
Thickness
1.6 mm
Parts
40
Nets
11
Pads
61
Tracks, vias
22, 202
Pours
39
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Jul 2026
Updated
15 Jul 2026

Overview

Drone is an open-source printed circuit board by dylanelong, from the dylanelong/Manual-3-Inch-Drone-Stack repository on GitHub, published under the MIT licence. It is a 4-layer board of 33 × 33.3 mm with 40 parts on 11 nets, routed with 22 tracks and 202 vias.

It is built around the TLV73333PDBVR-HXY. Its parts include 4 resistors, 2 ICs, 2 diodes and 1 inductor. It belongs with the robots and motor control boards of this library.

Main components

1

Parts

40
QtyValueFootprintReferences
22TestPointTestPoint:TestPoint_Pad_D3.0mmESC_1, ESC_2, ESC_10, ESC_11, ESC_12, ESC_13, ESC_14, ESC_15, ESC_16, ESC_17, ESC_18, ESC_20, ESC_21, ESC_22, ESC_23, ESC_24 +6
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
21uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCin2, Cout2
2LEDLED_SMD:LED_0805_2012MetricD1, D2
10.1uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCboot1
110uInductor_SMD:L_Bourns_SRN6045TAL1
110uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCin1
11kResistor_SMD:R_0805_2012MetricR4
122uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderCout1
1330Resistor_SMD:R_0805_2012MetricR3
173.2kResistor_SMD:R_0805_2012MetricR1
19.91kResistor_SMD:R_0805_2012MetricR2
1TLV73333PDBVRTLV73333PDBVR:DBV0005A_LU2
1TPS54302DDCTTPS54302DDCT:DDC0006A_LU1

More from dylanelong/Manual-3-Inch-Drone-Stack

1
  • 2 layers33.5 × 33.5 mmFlight Controller, the printed circuit board in 3D

    Flight Controller

    dylanelong/Manual-3-Inch-Drone-Stack

    This is a collection of the KiCAD projects I have created to make a manual drone from scratch. I have not attempted get them manufactured (nor do I plan to), but it was good practice, a lot of fun, and a little annoying.

    36 partsMIT

Similar boards

  • 2 layers73 × 139 mmOpenRPNCalc, the printed circuit board in 3D

    OpenRPNCalc

    apoluekt/OpenRPNCalc

    Open-source and open-hardware scientific RPN calculator

    141 parts414CERN-OHL-P-2.0
  • 2 layers125 × 67 mmChoco, the printed circuit board in 3D

    Choco

    hsgw/choco

    7x4 ortholinear onehanded keyboard/macropad.

    54 parts14MIT
  • 2 layers40 × 20 mmB GP-02-Brk-01Mbr R01, the printed circuit board in 3D

    B GP-02-Brk-01Mbr R01

    Boardoza/Boardoza_GP-02_GNSS_Satellite_Navigation_Breakout_Board

    A multi-mode GNSS receiver breakout board based on the GP-02 SoC supporting BDS, GPS, and GLONASS.

    24 parts5CC-BY-SA-4.0
  • 2 layers40 × 20 mmB E22 900M22S BRK R1.0, the printed circuit board in 3D

    B E22 900M22S BRK R1.0

    Boardoza/Boardoza_E22-900M22S_Long_Range_LoRa_Breakout_Board

    Long-range LoRa® breakout board based on the Ebyte E22-900M22S and Semtech SX1262 transceiver.

    13 parts3CC-BY-SA-4.0
  • 2 layers53.3 × 22.9 mmB STM32F103-EVAL R1.0, the printed circuit board in 3D

    B STM32F103-EVAL R1.0

    Boardoza/Boardoza_STM32F103_Blue_Pill_Development_Board

    Compact Blue Pill STM32F103C8T6-based ARM Cortex-M3 development board for versatile embedded applications.

    35 parts3CC-BY-SA-4.0
  • 2 layers20 × 20 mmB TPiS 1S 1385, the printed circuit board in 3D

    B TPiS 1S 1385

    Boardoza/Boardoza_Excelitas_TPiS_1S_1385_IR_Presence_Motion_Detection_Breakout

    TPiS1385 IR Thermopile Sensor for Contactless Temperature Measurement Breakout Board.

    15 parts1CC-BY-SA-4.0
  • 2 layers20 × 20 mmB MS5611-Brk-01Mbr R01, the printed circuit board in 3D

    B MS5611-Brk-01Mbr R01

    Boardoza/Boardoza_MS5611_Barometric_Pressure_Sensor_Breakout_Board

    MS5611 High-Resolution Barometric Pressure Sensor for Accurate Altitude Measurements Breakout Board.

    19 parts1CC-BY-SA-4.0
  • 2 layers20 × 20 mmB TH09C Brk-01Mbr R01, the printed circuit board in 3D

    B TH09C Brk-01Mbr R01

    Boardoza/Boardoza_TH09C_Temperature_Humidity_Sensor_Breakout_Board

    TH09C Digital Temperature and Humidity Sensor Breakout Board for Accurate Environmental Monitoring via I2C Interface.

    16 parts1CC-BY-SA-4.0

Questions

How big is the Drone PCB?

It measures 33 × 33.3 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Drone use?

40 parts, built around the TLV73333PDBVR-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Drone KiCad files?

From the dylanelong/Manual-3-Inch-Drone-Stack repository on GitHub, at the commit this page was made from: the board is Drone.kicad_pcb and its schematic Drone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Drone design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).