
B GP-02-Brk-01Mbr R01
Boardoza/Boardoza_GP-02_GNSS_Satellite_Navigation_Breakout_Board
A multi-mode GNSS receiver breakout board based on the GP-02 SoC supporting BDS, GPS, and GLONASS.

TH09C Digital Temperature and Humidity Sensor Breakout Board for Accurate Environmental Monitoring via I2C Interface.
B TH09C Brk-01Mbr R01 is an open-source printed circuit board by Boardoza, from the Boardoza/Boardoza_TH09C_Temperature_Humidity_Sensor_Breakout_Board repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 20 × 20 mm with 16 parts on 9 nets, routed with 138 tracks and 6 vias.
It is built around the TH09C, TLV73333PDBVR-HXY and 2N7002-7-F-ES. Its parts include 5 resistors, 3 capacitors, 2 ICs, 2 transistors and 1 connector. It belongs with the sensors and measurement and interfaces and adapters boards of this library.
The TH09C Digital Temperature and Humidity Sensor Breakout Board offers reliable environmental monitoring with high accuracy and low power consumption. Featuring the TH09C sensor, this board provides precise digital temperature and humidity readings via an I2C interface. Its fast response time and high repeatability make it ideal for use in HVAC systems, weather stations, and other applications where environmental data is critical.
| Front Side | Back Side |
|---|---|
![]() | ![]() |
Input Voltage: 2V - 5.5V
Voltage Input Type: Molex 4 pin 2.50mm header
Interface: I2C
Functions: Temprature and Humidity Sensor
Temperature Accuracy: ±0.15°C
Humidity Accuracy: Typical ±2.0% RH
Measurement Range: -40°C ~ +100°C
Operating Humidity: 0% to 100% RH
Operating Temperature: -40°C ~ +100°C
Board Dimensions: 20mm x 20mm
| (J1) Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VCC | Power Supply |
| 2 | SCL | I2C Serial Clock Pin |
| 3 | SDA | I2C Serial Data Pin |
| 4 | GND | Ground |
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 2N7002_R1_00001 | digikey-footprints:SOT-23-3 | Q1, Q2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | LED POWER | LED_SMD:LED_0603_1608Metric | PWR |
| 1 | MOLEX_CONNECTOR_1X4 | others:2317-04S_1x04_P2.50mm_Vertical | J1 |
| 1 | TH09C | TH09C:TH09C | U1 |
| 1 | TLV73333PDBVR | Package_TO_SOT_SMD:SOT-23-5 | U2 |
The 14 most common of 16 parts.

Boardoza/Boardoza_GP-02_GNSS_Satellite_Navigation_Breakout_Board
A multi-mode GNSS receiver breakout board based on the GP-02 SoC supporting BDS, GPS, and GLONASS.

Boardoza/Boardoza_MS5611_Barometric_Pressure_Sensor_Breakout_Board
MS5611 High-Resolution Barometric Pressure Sensor for Accurate Altitude Measurements Breakout Board.

Boardoza/Boardoza_NSP2340T16L_VoiceIC_Development_Board
Voice IC development board with I²C interface and 16 capacitive touch channels for voice-assisted applications.

Boardoza/Boardoza_SAM-M10Q_Multi_GNSS_Positioning_Breakout_Board
Boardoza SAM-M10Q Breakout Board is a high-precision multi-GNSS positioning module with integrated patch antenna and UART/I²C communication support.

SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects

magnus188/aegir
Open-source ESP32-P4 trimix analyzer prototype for technical diving,

simple-ee/mBMS
This is the modular BMS for use with 8S LiFePO4

windsorschmidt/reflow
Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.
It measures 20 × 20 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the TH09C, TLV73333PDBVR-HXY and 2N7002-7-F-ES. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Boardoza/Boardoza_TH09C_Temperature_Humidity_Sensor_Breakout_Board repository on GitHub, at the commit this page was made from: the board is hardware files/B-TH09C-Brk-01Mbr-R01.kicad_pcb and its schematic hardware files/B-TH09C-Brk-01Mbr-R01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).