Skip to the content
2 layers33.5 × 33.5 mmFlight Controller, the printed circuit board in 3D

This is a collection of the KiCAD projects I have created to make a manual drone from scratch. I have not attempted get them manufactured (nor do I plan to), but it was good practice, a lot of fun, and a little annoying.

Size
33.5 × 33.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
70
Pads
160
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
15 Jul 2026
Updated
15 Jul 2026

Overview

Flight Controller is an open-source printed circuit board by dylanelong, from the dylanelong/Manual-3-Inch-Drone-Stack repository on GitHub, published under the MIT licence. It is a 2-layer board of 33.5 × 33.5 mm with 36 parts on 70 nets.

It is built around the STM32F405RGT6 and NX3225GD-8MHZ-STD-CRA-3. Its parts include 11 capacitors, 6 resistors, 3 connectors, 2 ICs and 1 diode. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

2

Parts

36
QtyValueFootprintReferences
60.1uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C3, C4, C9, C10, C11
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
310kResistor_SMD:R_0805_2012MetricR2, R3, R4
218pCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC7, C8
22.2uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C6
24.7kResistor_SMD:R_0805_2012MetricR5, R6
2RResistor_SMD:R_0805_2012Metric10k1, 100k1
110uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
13.3VTestPoint:TestPoint_Pad_D3.0mmTP1
14754Connector_PinHeader_2.54mm:BNO085 MountU1
15.1kResistor_SMD:R_0805_2012MetricR1
15VTestPoint:TestPoint_Pad_D3.0mmTP2
1CCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder0.1u1
1Conn_01x02_PinConnector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1RightJ2
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1
1FerriteBeadfootprint:BEADC1608X95NFB1
1GNDTestPoint:TestPoint_Pad_D3.0mmTP3
1NX3225GD-8MHZ-STD-CRA-3NX3225GD-8MHZ-STD-CRA-3:XTAL_NX3225GD-8MHZ-STD-CRA-3Y1
1SB120Diode_SMD:D_0603_1608MetricD1
1STM32F405RGT6Package_QFP:LQFP-64_10x10mm_P0.5mmU2
1USB_C_Plug_USB2.0Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalP1
1VBATTestPoint:TestPoint_Pad_D3.0mmTP4

More from dylanelong/Manual-3-Inch-Drone-Stack

1
  • 4 layers33 × 33.3 mmDrone, the printed circuit board in 3D

    Drone

    dylanelong/Manual-3-Inch-Drone-Stack

    This is a collection of the KiCAD projects I have created to make a manual drone from scratch. I have not attempted get them manufactured (nor do I plan to), but it was good practice, a lot of fun, and a little annoying.

    40 partsMIT

Similar boards

  • 2 layers66.6 × 41.3 mmUPIC46, the printed circuit board in 3D

    UPIC46

    emertcakir/uPIC46

    PIC18F46K22-based versatile development board with CAN, RS-485, EEPROM, RTC, and user LEDs

    111 parts2MIT
  • 4 layers30.5 × 17.8 mmAtari usb, the printed circuit board in 3D

    Atari usb

    jomag/atari-usb

    Atari Joystick to USB adapter

    38 parts1LGPL-2.1
  • 2 layers76 × 45 mmFuel center, the printed circuit board in 3D

    Fuel center

    andrew-c-tran/byteshift-fuel-center

    Automotive-grade CAN module for fuel pressure, temperature and ethanol content. AEC-qualified parts, fail-safe protocol, JLCPCB-ready.

    52 partsGPL-3.0
  • 2 layers80 × 25 mmRedPink STM32C09 Board, the printed circuit board in 3D

    RedPink STM32C09 Board

    ARMontt/RedPink-CAN-USB

    Device for Industrial - Automotive development

    39 partsCC0-1.0
  • 8 layers160 × 100 mmETH1CLCR1, the printed circuit board in 3D

    ETH1CLCR1

    BehrensG/ETH1CLCR1

    751 parts
  • 2 layers100 × 100 mmPdm, the printed circuit board in 3D

    Pdm

    jumper385/uwam_pdm_2021

    85 parts
  • 2 layers85.6 × 54 mmRamn, the printed circuit board in 3D

    Ramn

    ToyotaInfoTech/RAMN

    RAMN (Resistant Automotive Miniature Network), a miniature CAN/CAN-FD testbed of 4 Electronic Control Units.

    106 parts285
  • 2 layers59.1 × 99.9 mmCheap FOCer 2 60mm, the printed circuit board in 3D

    Cheap FOCer 2 60mm

    shamansystems/Cheap-FOCer-2

    Low-Cost Motor Controller based on the VESC 6

    193 parts407

Questions

How big is the Flight Controller PCB?

It measures 33.5 × 33.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Flight Controller use?

36 parts, built around the STM32F405RGT6 and NX3225GD-8MHZ-STD-CRA-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Flight Controller KiCad files?

From the dylanelong/Manual-3-Inch-Drone-Stack repository on GitHub, at the commit this page was made from: the board is Flight Controller.kicad_pcb and its schematic Drone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Flight Controller design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).