

CubeSat PCB V0.3
Cube-Sat PCB Files
- Size
- 34.4 × 65.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 54
- Pads
- 117
- Tracks, vias
- 171, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Feb 2024
- Updated
- 4 Mar 2024
Overview
CubeSat PCB V0.3 is an open-source printed circuit board by dylanballback, from the dylanballback/cubesatPCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 34.4 × 65.5 mm with 18 parts on 54 nets, routed with 171 tracks and 7 vias.
It is built around the SN65HVD230DR, MP1584EN and LSM9DS1, with the XT60PW-M among its other parts. Its parts include 6 connectors, 3 capacitors, 3 resistors, 3 ICs and 1 switch.
Main components
4SN65HVD230DR
SOP-8CAN TransceiversTokmasMP1584EN
SOIC-8-EP-20℃~+85℃ 1 100kHz~1.5MHz 4.5V~28V Adjustable Buck Buck Built-in SOIC-8-EP DC-DC Converters ROHSMonolithic Power SystemsDC-DC ConvertersLSM9DS1
LGA-24(3x3.5)-40℃~+85℃ 1.9V~3.6V 16bit Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-24(3x3.5) Accelerometers ROHSSTMicroelectronicsAccelerometersXT60PW-M
-Horizontal plug Yellow - Power connector / plug connector ROHSChangzhou Amass ElecPlug
README
README.mdcubesatPCB
Cube-Sat PCB Files
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 22pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | CAN Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Crystal | dylan:Crystal_SMD_HC49-US | Y1 |
| 1 | Encoder Connector | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LOGO | dylan:eppl_logo2 | G*** |
| 1 | LSM9DS1 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | MCP2515-I_SO | dylan:SOIC127P1030X265-18N | U3 |
| 1 | MP1584EN | dylan:SRT_MPT1584EN_Module | U1 |
| 1 | Raspberry_Pi_2_3 | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | J1 |
| 1 | SN65HVD230DR | dylan:SOIC127P599X175-8N | U2 |
| 1 | SW_DPDT_x2 | dylan:SW_500SSP1S2M2QEA | SW1 |
| 1 | XT60PW-M | dylan:AMASS_XT60PW-M | J4 |
More from dylanballback/cubesatPCB
3- 2 layers34.4 × 65.5 mm

- 2 layers43.6 × 55.1 mm

- 2 layers34.4 × 65.5 mm

Similar boards
- 4 layers163 × 83 mm

Voxboard
shadedvox/arsenal
A fully custom 6 degree-of-freedom robotic arm, built from the ground up across hardware, firmware, and mechanical design.
182 parts1Apache-2.0 - 2 layers37.8 × 21.5 mm

- 4 layers160 × 73.2 mm

MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 2 layers43 × 43 mm

- 4 layers128 × 184 mm

Cosmicpi 1.7
CosmicPi/CosmicPiV1.7PCB
PCB for Version 1.7 of the Cosmic Pi Hardware. Incremental changes from V1.6. This design is licensed under the CERN OHL V1.2
219 parts14 - 6 layers44 × 118 mm

3210retro test
DasBasti/NokiaRetroFit
Retrofitting a Nokia 3210 with modern Processor
195 parts9Apache-2.0 - 4 layers35 × 44.6 mm

- 2 layers47.2 × 35 mm

Questions
How big is the CubeSat PCB V0.3 PCB?
It measures 34.4 × 65.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CubeSat PCB V0.3 use?
18 parts, built around the SN65HVD230DR, MP1584EN, LSM9DS1 and XT60PW-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CubeSat PCB V0.3 KiCad files?
From the dylanballback/cubesatPCB repository on GitHub, at the commit this page was made from: the board is CubeSat PCB V0.3/CubeSat PCB V0.3.kicad_pcb and its schematic CubeSat PCB V0.1/CubeSat PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CubeSat PCB V0.3 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).