
37c3PCBLEDC100R Rev.1
c3re/37c3PCBLEDC100R
Solder-Kit with some LEDs. Can also be used as a coaster for drinks.

ESP8266 based WiFi module for MHI split-system air conditioners.
MHI ESP is an open-source printed circuit board by dvisser, from the dvisser/MHI-ESP-PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 26 × 59.3 mm with 22 parts on 22 nets, routed with 104 tracks and 22 vias.
It is built around the WEMOS D1 MINI, LD1117S50TR(MS) and BSS138. Its parts include 10 resistors, 5 transistors, 3 connectors, 2 ICs and 1 capacitor. It belongs with the radio and wireless boards and the ESP8266 boards of this library.
ESP8266 based WiFi module for MHI split-system air conditioners that communicates directly with the air conditioner via the indoor unit PCB "CNS" (spi data) and "CNE" (display board data) connectors.
The "CNE" connection (between IR receiver board and the indoor unit control board) is to add features that are not accessible over the SPI connection on the "CNS" header (such as 3D Auto, some vane controls, etc).
This module is designed to run firmware developed jointly with TZB (thezerobeast) which is available here https://github.com/TheZeroBeast/ACWiFi
This PCB was designed and developed using KiCAD :-)


| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 5 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 2 | 2060-451/998-404 | wago:P-2060-451_998-404 | J2, J3 |
| 1 | 10uF, 0805 | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | CNS | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | LD1117S50TR | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
The 21 most common of 22 parts.

c3re/37c3PCBLEDC100R
Solder-Kit with some LEDs. Can also be used as a coaster for drinks.






It measures 26 × 59.3 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the WEMOS D1 MINI, LD1117S50TR(MS) and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dvisser/MHI-ESP-PCB repository on GitHub, at the commit this page was made from: the board is MHI ESP.kicad_pcb and its schematic MHI ESP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).