
37c3PCBLEDC100R Rev.2
c3re/37c3PCBLEDC100R
Solder-Kit with some LEDs. Can also be used as a coaster for drinks.

Solder-Kit with some LEDs. Can also be used as a coaster for drinks.
37c3PCBLEDC100R Rev.1 is an open-source printed circuit board by c3re, from the c3re/37c3PCBLEDC100R repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board with 25 parts on 26 nets, routed with 130 tracks and 0 vias.
It is built around the WEMOS D1 MINI, WS2812B and BSS138. Its parts include 8 diodes, 3 resistors, 1 IC and 1 transistor. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Coaster for your drinks with option for LED and microcontroller upgrade.

Important: Do not power the board by USB and an external power supply at the same time! The Din pin of the first LED is connected to pin D4 (GPIO2) of the Wemos D1 mini. Two of the mounting holes are connected to GND, two of the holes are connected to 5V. You can use this feature to stack multiple 37c3PCBLEDc100R Boards with brass spacers.
The revision 1 contains an error in the PCB-Layout! The error affects all LED footprints, the LED pins 1 & 2 are swapped. To fix the Bug, we recommend to bend pin 2 around the PCB edge and solder it on the bottom to the squared pad.

Bugfixed
The 37c3 Logo and the dithered image of the bolt cutter were created by Robokid // Luis F. Masallera and Euler Void
37c3PCBLEDC100R © 2023 by c3RE is licensed under CC BY 4.0. To view a copy of this license,
visit http://creativecommons.org/licenses/by/4.0/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | WS2812B | WS2812_THT:WS2812_THT | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | +5V | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2 |
| 2 | GND | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H3, H4 |
| 2 | R | R_combi:1206_combi_handsolder | R2, R3 |
| 1 | 100 | R_combi:1206_combi_handsolder | R1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Din | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP1 |
| 1 | Dout | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP2 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
| 1 | ~ | Proto:Protoarea | A1 |
The 20 most common of 25 parts.

c3re/37c3PCBLEDC100R
Solder-Kit with some LEDs. Can also be used as a coaster for drinks.


dvisser/MHI-ESP-PCB
ESP8266 based WiFi module for MHI split-system air conditioners.





vascofazza/cloxie_nixie_clock
Schematics and code for Cloxie: my Nixie Tube Clock.
25 parts, built around the WEMOS D1 MINI, WS2812B and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the c3re/37c3PCBLEDC100R repository on GitHub, at the commit this page was made from: the board is Rev.1/CAD/37c3PCBLEDC100R_Rev.1.kicad_pcb and its schematic Rev.1/CAD/37c3PCBLEDC100R_Rev.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).