2 layers
37c3PCBLEDC100R Rev.1
c3re/37c3PCBLEDC100R
Solder-Kit with some LEDs. Can also be used as a coaster for drinks.
25 parts7CC-BY-4.0
2 layers26.3 × 31.5 mm
7seg clock
Duckle29/7seg-clock-pcb1A PCB for leoclees 7segment RGB clock
- Size
- 26.3 × 31.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 7
- Pads
- 43
- Tracks, vias
- 79, 4
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Jul 2018
- Updated
- 4 Jul 2018
Overview
7seg clock is an open-source printed circuit board by Duckle29, from the Duckle29/7seg-clock-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 26.3 × 31.5 mm with 12 parts on 7 nets, routed with 79 tracks and 4 vias.
It is built around the WEMOS D1 MINI and BSS138. Its parts include 4 resistors, 2 transistors, 2 connectors and 1 capacitor. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Main components
2README
readme.mdA small PCB for stacking on a WemosD1-mini to control two strips of WS2812 LEDs
This board has been made to work with this 7 segment clock. It uses 2 mosfets as level-shifters instead of the levelshifter chip originally used. It also incorporates the barrel-jack into the PCB
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | Barrel Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Strips | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | WeMos_D1_mini | Module:WeMos_D1_mini | A1 |
The 10 most common of 12 parts.
Similar boards
- 2 layers26 × 59.3 mm
MHI ESP
dvisser/MHI-ESP-PCB
ESP8266 based WiFi module for MHI split-system air conditioners.
22 parts4GPL-3.0 - 2 layers49.5 × 37.5 mm
- 2 layers67.2 × 61.7 mm
- 2 layers75 × 81.5 mm
- 2 layers35.6 × 27 mm
- 2 layers60 × 40 mm
- 2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396
Questions
How big is the 7seg clock PCB?
It measures 26.3 × 31.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 7seg clock use?
12 parts, built around the WEMOS D1 MINI and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 7seg clock KiCad files?
From the Duckle29/7seg-clock-pcb repository on GitHub, at the commit this page was made from: the board is 7seg-clock.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 7seg clock design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).