
Diffprobe espnow
dudeku/esp-now-differential-probe
OR in Ethernet.h in line 261: virtual void begin(); -> virtual void begin(uint16t port=0);

OR in Ethernet.h in line 261: virtual void begin(); -> virtual void begin(uint16t port=0);
Diffprobe espnow is an open-source printed circuit board by dudeku, from the dudeku/esp-now-differential-probe repository on GitHub. It is a 2-layer board of 238.3 × 278.6 mm with 486 parts on 341 nets, routed with 1,713 tracks and 153 vias.
It is built around the ESP32-S3-WROOM-1-N8, TML 20205 and LDL1117S33R, with the TXB0108PW, USBLC6-2SC6 and W5500 among its other parts. Its parts include 213 capacitors, 201 resistors, 53 connectors, 7 ICs and 3 switches. It belongs with the ESP32 boards of this library.
K. Dudek
ver: 2.0.17
in Ethernet.h
class EthernetServer : public Server
->
class EthernetServer : public PrintOR
in Ethernet.h in line 261:
virtual void begin();
->
virtual void begin(uint16_t port=0);
and in EthernetServer.cpp in line 28:
void EthernetServer::begin()
->
void EthernetServer::begin(uint16_t port_not_used)spi3 problem, not setting pinMode MISO (6)
[ ][E][esp32-hal-gpio.c:190] __digitalRead(): IO 6 is not set as GPIO.digitalRead() in LTC2449 lib cannot access MISO pin to check if transmission has been completed.
need to change LIC2449 library implementation for new version.| Qty | Value | Footprint | References |
|---|---|---|---|
| 160 | 1 MOhms | Resistor_SMD:R_1206_3216Metric | R501, R502, R503, R504, R505, R506, R507, R508, R509, R510, R511, R512, R513, R514, R515, R516 +144 |
| 160 | 10 pF | Capacitor_SMD:C_1206_3216Metric | C501, C502, C503, C504, C505, C506, C507, C508, C509, C510, C511, C512, C513, C514, C515, C516 +144 |
| 32 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J101, J102, J103, J104, J105, J106, J107, J108, J109, J110, J111, J112, J113, J114, J115, J116 +16 |
| 17 | 470pF | Capacitor_SMD:C_0603_1608Metric | C201, C202, C203, C204, C205, C206, C207, C208, C209, C210, C211, C212, C213, C214, C215, C216 +1 |
| 16 | Screw_Terminal_01x02 | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_Horizontal | J501, J502, J503, J504, J505, J506, J507, J508, J509, J510, J511, J512, J513, J514, J515, J516 |
| 15 | 470R | Resistor_SMD:R_0603_1608Metric | R202, R203, R204, R205, R206, R207, R208, R209, R210, R211, R212, R213, R214, R215, R216 |
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C112, C116, C117, C118, C119, C120, C121 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R101, R102, R105, R109, R110, R111 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C102, C107, C303, C305 |
| 4 | 33R | Resistor_SMD:R_0603_1608Metric | R112, R113, R114, R115 |
| 4 | 49R9 | Resistor_SMD:R_0603_1608Metric | R117, R119, R120, R121 |
| 3 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C105, C217, C218 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C101, C103, C108 |
| 2 | 100u | Capacitor_SMD:CP_Elec_10x12.5 | C304, C306 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C114, C124 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C104, C106 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C113, C122 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C110, C111 |
| 2 | 1MEG | Resistor_SMD:R_0603_1608Metric | R107, R218 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R106, R217 |
| 2 | 22nF | Capacitor_THT:C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4 | C301, C302 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R122, R123 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R103, R104 |
| 2 | 6.8nF | Capacitor_SMD:C_0603_1608Metric | C125, C126 |
| 2 | B72207S0251K101 | Varistor:RV_Disc_D9mm_W4.2mm_P5mm | RV1, RV2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW101, SW102 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R108 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R118 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R201 |
| 1 | 12.4k 1% | Resistor_SMD:R_0603_1608Metric | R116 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C127 |
| 1 | 22nF | Capacitor_SMD:C_0603_1608Metric | C123 |
| 1 | 37213150431 | Fuse:Fuse_Littelfuse_372_D8.50mm | F1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C109 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C115 |
| 1 | 4n7F | Capacitor_SMD:C_0603_1608Metric | C219 |
| 1 | 500SDP1S1M2QEA | Button_Switch_THT:SW_PUSH_E-Switch_500SDP1S1M2QEA | SW103 |
| 1 | 8P8C_LED_Shielded_x2 | MyGlobalLibrary:CONN12_5-2301994-8_TEC | J12 |
| 1 | AC_E | Connector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork | J56 |
| 1 | AC_N | Connector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork | J55 |
| 1 | AC_P | Connector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork | J54 |
| 1 | BLM18PG121SN1D | Inductor_SMD:L_0603_1608Metric | L101 |
| 1 | DF18CC1-25.000MHZ-T | Crystal:Crystal_SMD_HC49-SD | Y101 |
| 1 | EPCOS B82722A2202N001 | Inductor_THT:Choke_EPCOS_B82722A | FL1 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1U | U101 |
| 1 | LDL1117S33R | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U104 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D102 |
| 1 | LM4030-2.5 | Package_TO_SOT_SMD:SOT-23-5 | U106 |
| 1 | LTC2448CUHF-PBF | Package_DFN_QFN:QFN-38-1EP_5x7mm_P0.5mm_EP3.15x5.15mm | U102 |
| 1 | NSR20F30NXT5G | Diode_SMD:D_0603_1608Metric | D101 |
| 1 | TML_20205 | Library:CONV_TML_20205 | PS1 |
| 1 | TXB0108PW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U107 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U105 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J11 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U103 |

dudeku/esp-now-differential-probe
OR in Ethernet.h in line 261: virtual void begin(); -> virtual void begin(uint16t port=0);

dudeku/esp-now-differential-probe
OR in Ethernet.h in line 261: virtual void begin(); -> virtual void begin(uint16t port=0);

dudeku/esp-now-differential-probe
OR in Ethernet.h in line 261: virtual void begin(); -> virtual void begin(uint16t port=0);








hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
It measures 238.3 × 278.6 mm and has 2 copper layers, 1.6 mm thick.
486 parts, built around the ESP32-S3-WROOM-1-N8, TML 20205, LDL1117S33R and TXB0108PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dudeku/esp-now-differential-probe repository on GitHub, at the commit this page was made from: the board is pcb/diffprobe-espnow/diffprobe-espnow.kicad_pcb and its schematic pcb/diffprobe-espnow/MagInputs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dudeku before reusing the design.