

Esp32-s3-board
- Size
- 25.4 × 55.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 95
- Pads
- 207
- Tracks, vias
- 255, 154
- Pours
- 65
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 May 2025
- Updated
- 1 Jul 2025
Overview
Esp32-s3-board is an open-source printed circuit board by UoA-Naoki, from the UoA-Naoki/henboard repository on GitHub. It is a 2-layer board of 25.4 × 55.9 mm with 26 parts on 95 nets, routed with 255 tracks and 154 vias.
It is built around the ESP32-S3-WROOM-1-N8, LDL1117S33R and USBLC6-2P6, with the SKRPACE010, MC-314C-4P16 and UMH3N among its other parts. Its parts include 10 capacitors, 6 resistors, 4 ICs, 3 connectors and 2 switches. It belongs with the ESP32 boards of this library.
Main components
6ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLDL1117S33R
SOT-223-4-40℃~+125℃@(Tj) 1 1.2A 18V 3.3V 500uA 600mV@(1.2A) 60uVrms 87dB@(120Hz) Fixed Over Current Protection、Thermal Shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)SKRPACE010
SMD-4P,4.2x3.2mm-30℃~+85℃ 16V 2.5mm 2.6N 3.2mm 4.2mm 50,000 cycles 50mA J-Lead Oval button SPST-NO Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSALPSALPINETactile SwitchesMC-314C-4P16
SMD-30℃~+75℃ 1 16P 5A 6.5mm Black Female Laminated board Type-C USB 2.0 SMD USB Connectors ROHSSOFNGUSB ConnectorsUMH3N
SOT-363-55℃~+150℃ 0.5uA 100 100mA 150mW 2 NPN (Pre-Biased) 250MHz 300mV 50V 5V 6.11kΩ NPN SOT-363 Digital Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Digital Transistors
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 6 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 2 | Conn_01x22 | Connector_PinHeader_2.54mm:PinHeader_1x22_P2.54mm_Vertical | J2, J3 |
| 2 | SKRPACE010 | SKRPACE010:SKRPACE010 | S1, S2 |
| 1 | CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1:ESP32-S3-WROOM-1 | U4 |
| 1 | LDL1117S33R | LDL1117S33R:LDL1117S33R | U2 |
| 1 | MC-314C-4P16 | MC-314C-4P16:USB-C-SMD_MC-314C-4P16 | J1 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U1 |
More from UoA-Naoki/henboard
2- 2 layers200 × 200 mm

- 2 layers97.8 × 78.7 mm

Similar boards
- 4 layers58 × 35 mm

ESP HI PLUS
dyu134/ESP-HI-PLUS
The Robot sub-module is a high-performance actuator and sensing expansion board for the ESP-HI-PLUS, designed to transform the device into a mobile or interactive robotic platform.
88 parts - 4 layers59.9 × 88.1 mm

- 2 layers140 × 20 mm

- 2 layers60 × 60 mm

Arcboard stm32-mk2
christrotter/arcboard-stm32-mk2
Next iteration of the stm32f405 board; paradigm shift means new repo.
94 partsMIT - 4 layers95 × 58 mm

- 4 layers98.9 × 81.3 mm

- 4 layers98.3 × 81.2 mm

- 4 layers24 × 96 mm

Questions
How big is the Esp32-s3-board PCB?
It measures 25.4 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32-s3-board use?
26 parts, built around the ESP32-S3-WROOM-1-N8, LDL1117S33R, USBLC6-2P6 and SKRPACE010. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32-s3-board KiCad files?
From the UoA-Naoki/henboard repository on GitHub, at the commit this page was made from: the board is esp32-s3-board/esp32-s3-board.kicad_pcb and its schematic digital-piano/digital-piano.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32-s3-board design in my own project?
Its repository states no licence, so its author keeps all rights: ask UoA-Naoki before reusing the design.