2 layers45 × 25 mm
Easy PD Sink
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
41 parts599
2 layers35 × 25 mm
Dpx pd pooper
dubpixel/dpx_pd_pooperch244 pd trigger board
- Size
- 35 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 16
- Pads
- 71
- Tracks, vias
- 149, 19
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Dec 2024
- Updated
- 15 Dec 2024
Overview
Dpx pd pooper is an open-source printed circuit board by dubpixel, from the dubpixel/dpx_pd_pooper repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 35 × 25 mm with 18 parts on 16 nets, routed with 149 tracks and 19 vias.
It is built around the CH224K. Its parts include 6 resistors, 1 capacitor, 1 IC, 1 diode and 1 connector.
Main components
1README
README.md[blocked]
dpx_pd_pooper
pd poops on tap
...a basic ch224k pd trigger board w/ usb-c connector
Project Here!
»
BOM Here!
»
Interactive BOM Here!
·
Report Bug
·
Request Feature
Table of Contents
About The Project
proving a basic ch224 pd power trigger IC to be used in forthcoming dubpixel / TNG ENT INC devices
www.dubpixel.tv - i@dubpixel.tv
FRONT
REAR
iBOM PCB Front
iBOM PCB Rear
Built With
Getting Started
Prerequisites
Installation
- Download...
- Enjoy.
- Repeat as Needed!
Usage
Use this space to show useful examples of how a project can be used. Additional screenshots, code examples and demos work well in this space. You may also link to more resources.
For more examples, please refer to the Documentation
Roadmap
- Feature 1
- Feature 2
- Feature 3
- Nested Feature
See the open issues for a full list of proposed features (and known issues).
Contributing
Contributions are what make the open source community such an amazing place to learn, inspire, and create. Any contributions you make are greatly appreciated.
If you have a suggestion that would make this better, please fork the repo and create a pull request. You can also simply open an issue with the tag "enhancement". Don't forget to give the project a star! Thanks again!
- Fork the Project
- Create your Feature Branch (
git checkout -b feature/AmazingFeature) - Commit your Changes (
git commit -m 'Add some AmazingFeature') - Push to the Branch (
git push origin feature/AmazingFeature) - Open a Pull Request
Top contributors:
License
Distributed under the MIT License. See LICENSE.txt for more information.
Contact
#Joshua Fleitell - i@dubpixel.tv
Project Link: https://github.com/dubpixel/dpx_pd_pooper
Acknowledgments
- [blocked]
- [blocked]
- [blocked]
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R5 |
| 4 | MountingHole_Pad_MP | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad_TopBottom | H1, H2, H3, H4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6 |
| 1 | 1 uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 220h 110mHz | DPX_USB:FERRITE_0603 | FB1 |
| 1 | CH224K | Package_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm_ThermalVias | U1 |
| 1 | HRO-TYPE-C-31-M-12 | DPX_USB:HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | Logo_Open_Hardware_Small | DPX_LIBRARY:OSHW-LogoNT_7.3x6mm_Silk | SYM1 |
| 1 | SW_DIP_x03 | DPX_CONTROL:SP-03P | SW1 |
| 1 | VBUS | DPX_LED:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | VOUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
Similar boards
- 4 layers170.2 × 141.9 mm
![[DFR1142]Lite Carrier for LattePanda Mu, the printed circuit board in 3D](/embed/boards/LtBrain/MuBook.jpg?size=s&soon)
[DFR1142]Lite Carrier for LattePanda Mu
LtBrain/MuBook
A x86 carrier board for the LattePanda Mu
308 parts37MIT - 6 layers100 × 120 mm
Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 2 layers29.1 × 45.1 mm
USB GC2
Xenii1642/USB-GC2
Meet the new generation of USB-C GameCube Power Board. Now compatible with both 12V and 15V chargers. Two voltages, twice the potential.
23 parts24CERN-OHL-S-2.0 - 4 layers91.7 × 66.8 mm
Pico expansion board
eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project
68 parts18GPL-3.0 - 2 layers14 × 100 mm
Powerline USB C
Andreas-Dorfner/Powerline-USB-C
Powerline is a small 3HP Front Entry USB-C eurorack power supply.
22 parts16 - 4 layers75.1 × 60.9 mm
- 2 layers61.8 × 18.5 mm
Questions
How big is the Dpx pd pooper PCB?
It measures 35 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dpx pd pooper use?
18 parts, built around the CH224K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dpx pd pooper KiCad files?
From the dubpixel/dpx_pd_pooper repository on GitHub, at the commit this page was made from: the board is hardware/src/dpx_pd_pooper/dpx_pd_pooper.kicad_pcb and its schematic hardware/src/dpx_pd_pooper/dpx_pd_pooper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dpx pd pooper design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).