Skip to the content
2 layers70 × 55 mmSplit, the printed circuit board in 3D

A high-fidelity four-channel amplifier with active-crossovers and room correction

Size
70 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
49
Nets
27
Pads
135
Tracks, vias
495, 116
Pours
5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Jan 2025
Updated
16 Nov 2025

Overview

Split is an open-source printed circuit board by duanestorey, from the duanestorey/hifi-amp repository on GitHub. It is a 2-layer board of 70 × 55 mm with 49 parts on 27 nets, routed with 495 tracks and 116 vias.

It is built around the BC817. Its parts include 21 connectors, 8 capacitors, 8 resistors, 4 diodes and 2 transistors.

Main components

1

README

README.md

hifi-amp

A hi-fi 4-channel amplifier with active-crossovers and room correction

Parts

49
QtyValueFootprintReferences
14Conn_01x03Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ1, J2, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J21
8470uCapacitor_SMD:CP_Elec_6.3x7.7C1, C2, C3, C4, C5, C6, C7, C8
61kCustom:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder_DuaneR1, R2, R3, R4, R5, R6
5Conn_01x03TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_HorizontalJ3, J4, J17, J18, J19
4MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottomH1, H2, H3, H4
210kCustom:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder_DuaneR7, R8
21N4001Diode_SMD:D_SMAD1, D3
2BC817Package_TO_SOT_SMD:SOT-23Q1, Q2
2G2RL-2Custom:Relay_DPDT_Omron_G2RL-2K1, K2
2LED_SmallCustom:LED_0805_2012Metric_Pad_HandSolder_DuaneD2, D4
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ16
1Conn_01x02Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ20

More from duanestorey/hifi-amp

12
  • 2 layers95 × 95 mmPlate amp, the printed circuit board in 3D

    Plate amp

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    114 parts1
  • 2 layers65 × 95 mmDual psu, the printed circuit board in 3D

    Dual psu

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    99 parts1
  • 2 layers75 × 95 mmPlate amp, the printed circuit board in 3D

    Plate amp

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    95 parts1
  • 2 layers75 × 55 mmDolby, the printed circuit board in 3D

    Dolby

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    91 parts1
  • 2 layers75 × 55 mmDsp, the printed circuit board in 3D

    Dsp

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    90 parts1
  • 2 layers75 × 55 mmDac, the printed circuit board in 3D

    Dac

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    87 parts1
  • 2 layers85 × 55 mmDolby, the printed circuit board in 3D

    Dolby

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    85 parts1
  • 2 layers75 × 55 mmRectifier, the printed circuit board in 3D

    Rectifier

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    80 parts1
  • 2 layers75 × 55 mmDac, the printed circuit board in 3D

    Dac

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    80 parts1
  • 4 layers85 × 55 mmDac, the printed circuit board in 3D

    Dac

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    76 parts1
  • 2 layers70 × 55 mmRectifier, the printed circuit board in 3D

    Rectifier

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    74 parts1
  • 2 layers85 × 55 mmDsp, the printed circuit board in 3D

    Dsp

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    74 parts1

Similar boards

  • 2 layers72 × 42 mmNRF24 jammer, the printed circuit board in 3D

    NRF24 jammer

    W0rthlessS0ul/nRF24_jammer

    The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

    51 parts1kMIT
  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers65 × 56.5 mmRPiG3iMac, the printed circuit board in 3D

    RPiG3iMac

    qbancoffee/imac_g3_ivad_board_init

    iMac G3 IVAD board initialization with an arduino

    44 parts240LGPL-3.0
  • 6 layers83.5 × 56 mmEspiff v3 1, the printed circuit board in 3D

    Espiff v3 1

    MDCservice/EsPiFF

    An ESP32 in the Raspberry Pi form factor

    172 parts223GPL-3.0
  • 2 layers87.9 × 98.7 mmBitdoglab smd, the printed circuit board in 3D

    Bitdoglab smd

    BitDogLab/BitDogLab

    Open-source educational hardware for embedded systems, programming, electronics, and physical computing.

    138 parts203
  • 2 layers77 × 100 mmBeamer1, the printed circuit board in 3D

    Beamer1

    shufps/diy-projector-clock

    DIY Projector Clock

    283 parts172
  • 2 layers84.2 × 52 mmPicoPico, the printed circuit board in 3D

    PicoPico

    DavidVentura/PicoPico

    Pico-8 Player

    57 parts141
  • 4 layers129 × 104.6 mmPC-1100X, the printed circuit board in 3D

    PC-1100X

    zscircuits/zs1100a

    All files hardware and software related to the zs1100a

    528 parts76

Questions

How big is the Split PCB?

It measures 70 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Split use?

49 parts, built around the BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Split KiCad files?

From the duanestorey/hifi-amp repository on GitHub, at the commit this page was made from: the board is pcbs/_final_proto/psu-split/1.0/split.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Split design in my own project?

Its repository states no licence, so its author keeps all rights: ask duanestorey before reusing the design.