
Plate amp
duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

A high-fidelity four-channel amplifier with active-crossovers and room correction
Debug is an open-source printed circuit board by duanestorey, from the duanestorey/hifi-amp repository on GitHub. It is a 2-layer board of 55 × 45 mm with 24 parts on 29 nets, routed with 165 tracks and 45 vias.
It is built around the TF-115-BCP9, ADUM4160BRW and TYPE-C-31-M-12. Its parts include 8 resistors, 4 capacitors, 3 connectors, 2 diodes and 1 IC.
A hi-fi 4-channel amplifier with active-crossovers and room correction
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 24R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopOnly | H1, H2, H3, H4 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 560R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2, J3 |
| 1 | ADUM4160 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U1 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | Conn_01x03 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J1 |
| 1 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | TF-115-BCP9 | easyeda2kicad:TF-SMD_TF-115-BCP9 | Card1 |
| 1 | TYPE-C-31-M-12 | easyeda2kicad:USB-C_SMD-TYPE-C-31-M-12 | USBC1 |

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

YeetTheAnson/MerlynCAM
An action camera that records at 1080p@90, 1440p@60 and 4k@20 (With I2S microphone and gyro logging @ 150Hz)

Jamane92/ESP32_C5_DRONE_VTX
Custom 4-layer FPV camera transmitter featuring an ESP32-C5 microcontroller, OV5640 camera sensor via PARLIO DVP, SD card logging, and 5.8 GHz Wi-Fi video streaming. Designed in KiCad.

YeetTheAnson/RFly-One
Offline general aviation proximity awareness system with support for ADS-B, FLARM AIR V7, OGNTP and FANET+


hasenbanck/remram
32bit STM32F7 based 3D printing controller using TMC2130 stepper driver

AllenNeuralDynamics/harp.device.lickety-split
0360: an ephys-compliant capacitive lick detector


AllenNeuralDynamics/harp.device.treadmill-driver
0326: a Harp-compatible device for controlling an instrumented mouse treadmill
It measures 55 × 45 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the TF-115-BCP9, ADUM4160BRW and TYPE-C-31-M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the duanestorey/hifi-amp repository on GitHub, at the commit this page was made from: the board is pcbs/psu/debug-prog/1.0/debug.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask duanestorey before reusing the design.