2 layers90 × 54 mm
2 layers152.9 × 93.6 mm
Controller
dst5rfcar/Controller_Pcb- Size
- 152.9 × 93.6 mm
- Copper layers
- 2
- Thickness
- 1.58 mm
- Parts
- 67
- Nets
- 61
- Pads
- 242
- Tracks, vias
- 541, 1,022
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 May 2024
- Updated
- 17 May 2024
Overview
Controller is an open-source printed circuit board by dst5rfcar, from the dst5rfcar/Controller_Pcb repository on GitHub. It is a 2-layer board of 152.9 × 93.6 mm with 67 parts on 61 nets, routed with 541 tracks and 1,022 vias.
It is built around the 0850BM14E0016T, AP2114HA-3.3TRG1 and AZ1117IH-5.0TRG1, with the 100SP1T1B4M2QE, B3U-1000P and TPD1E10B06DPYR among its other parts. Its parts include 20 capacitors, 15 resistors, 4 ICs, 4 diodes and 4 switches.
Main components
9
0850BM14E0016T
0603-40℃~+85℃ 1.6dB 180°@±17° 3.5dB 50Ω:50Ω 770MHz~928MHz 9.5dB 0603 Balun ROHSJohanson DielectricsBalun
AP2114HA-3.3TRG1
SOT-223-40℃~+85℃@(Ta) 1 1A 3.3V 30uVrms 65dB@(1kHz) 65uA 6V 750mV@(1A) Fixed Over Current Protection、Thermal Shutdown、使能控制 Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAZ1117IH-5.0TRG1
SOT-223-40℃~+125℃@(Tj) 0.003%Vout 1 1.2V@(0.8A) 1.35A 15V 4mA 5V 70dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
100SP1T1B4M2QE
插件-35℃~+85℃ 12.7mm 28V 50,000 cycles 5A 6.86mm PC Pin Round Column SPDT Through Hole Plugin Slide Switches ROHSE-SwitchSlide Switches
B3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile Switches
TPD1E10B06DPYR
X1-SON-2(0.6x1)-40℃~+125℃ 1 100nA 12pF 14V 5.5V 6A@8/20us 6V 90W@8/20us Bidirectional ESD IEC 61000-4-2 X1-SON-2(0.6x1) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
ABM3C-24.000MHZ-D4Y-T
SMD5032-4P-40℃~+85℃ 18pF 24MHz 50Ω ±30ppm ±30ppm SMD5032-4P Crystals ROHSAbraconCrystals
ABS07-32.768KHZ-T
SMD3215-2P-40℃~+85℃ 12.5pF 32.768kHz 70kΩ Crystal Oscillator ±20ppm SMD3215-2P Crystals ROHSAbraconCrystalsGRPB052VWVN-RC
插件,P=1.27mm-40℃~+105℃ 1.27mm 1.27mm 10P 1A 1mm 2 2.3mm 3mm Brass Gold Pin Header Through Hole 插件,P=1.27mm Pin Headers ROHSSullins Connector SolutionsPin Headers
README
README.mdController_Pcb
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C3, C4, C5, C9, C10, C13, C15, C16 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom | H1, H2, H3, H4, H5 |
| 4 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R14, R15 |
| 3 | 22uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C7, C11 |
| 2 | 100SP1T1B4M2QE | 100SP1T1B4M2QE (1):SW_100SP1T1B4M2QE | S3, S4 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19, C20 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C14 |
| 2 | 47.5K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | B3U-1000P | B3U-1000P:SW_B3U-1000P | S1, S2 |
| 2 | DNP | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | DNP | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17, C18 |
| 2 | LED | LED_SMD:LED_1206_3216Metric | D3, D4 |
| 2 | RK1631110TWA | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV2, RV3 |
| 2 | SolderBridge | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
| 2 | TPD1E10B06DPYR | TPD1E10B06DPYR:DIO_TPD1E05U06DPYR | D1, D2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2 |
| 1 | 0850BM14E0016T | balun:0850BM14E0016T_JOT-L | U3 |
| 1 | 1.2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 162J_CC_BC-3LP | KiCad:162JCCBC3LP | 21111111 |
| 1 | 180 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 36103205 | EMF Shield:WE-SHC-SHIELDING-CABINET | U4 |
| 1 | 500 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 6.8uH | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | L1 |
| 1 | 60312202114509 | SMA_Jack:60312202114509 | J3 |
| 1 | 691213710002 | 691213710002:691213710002 | J1 |
| 1 | 75 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | ABM3C-24.000MHZ-D4Y-T | 24MHz:CRYSTAL_ABM3C_ABR | Y1 |
| 1 | ABS07-32.768KHZ-T | 37K:ABS07 | 31111111 |
| 1 | AP2114HA-3.3TRG1 | AP2114HA-3:SOT230P700X185-4N | U2 |
| 1 | AZ1117IH-5.0TRG1 | AZ1117IH-5:SOT230P700X185-4N | U1 |
| 1 | BLM18HE152SN1D | BLM18HE152SN1D:BEADC1608X95N | FL1 |
| 1 | CC1310F128RGZR | CC1310:QFN50P700X700X100-49N-D | 11111111 |
| 1 | GRPB052VWVN-RC | GRPB052VWVN-RC:SULLINS_GRPB052VWVN-RC | J2 |
| 1 | LOGO | DST4F:image | G*** |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
Questions
How big is the Controller PCB?
It measures 152.9 × 93.6 mm and has 2 copper layers, 1.58 mm thick.
What parts does the Controller use?
67 parts, built around the 0850BM14E0016T, AP2114HA-3.3TRG1, AZ1117IH-5.0TRG1 and 100SP1T1B4M2QE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the dst5rfcar/Controller_Pcb repository on GitHub, at the commit this page was made from: the board is Controller.kicad_pcb and its schematic Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask dst5rfcar before reusing the design.
Similar boards
- 4 layers70 × 70 mm
Blue interface board
BetzDrive/interface-board
Power and signal conditioning board for the Betz Drive system
130 parts5 - 4 layers49.8 × 41.8 mm
Cc1352-swim thermo
mik4el/cc1352-swim-thermo
Software and hardware for dual band radio high accuracy swim thermometer
55 parts2Apache-2.0 - 2 layers100 × 100 mm
- 2 layers152.1 × 70.1 mm
- 4 layers38 × 55 mm
- 2 layers77 × 102.7 mm
S16R4
Zannden/numpad
This repository contains PCB and 3D model files for a wireless programmable numpad design by me.
102 partsMIT - 2 layers54 × 40 mm
