2 layers152.9 × 93.6 mm
2 layers90 × 54 mm
RF Race Car
dst5rfcar/Car_Pcb- Size
- 90 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 69
- Pads
- 182
- Tracks, vias
- 484, 312
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 May 2024
- Updated
- 16 May 2024
Overview
RF Race Car is an open-source printed circuit board by dst5rfcar, from the dst5rfcar/Car_Pcb repository on GitHub. It is a 2-layer board of 90 × 54 mm with 40 parts on 69 nets, routed with 484 tracks and 312 vias.
It is built around the 0850BM14E0016T, AP2114HA-3.3TRG1 and B3U-1000P, with the 68001-606HT, ABM3C-24.000MHZ-D4Y-T and ABS07-32.768KHZ-T among its other parts. Its parts include 16 capacitors, 5 connectors, 3 resistors, 3 ICs and 3 diodes. It belongs with the radio and wireless boards of this library.
Main components
7
0850BM14E0016T
0603-40℃~+85℃ 1.6dB 180°@±17° 3.5dB 50Ω:50Ω 770MHz~928MHz 9.5dB 0603 Balun ROHSJohanson DielectricsBalun
AP2114HA-3.3TRG1
SOT-223-40℃~+85℃@(Ta) 1 1A 3.3V 30uVrms 65dB@(1kHz) 65uA 6V 750mV@(1A) Fixed Over Current Protection、Thermal Shutdown、使能控制 Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
B3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile Switches68001-606HT
插件,P=2.54mmPin HeadersAmphenol
ABM3C-24.000MHZ-D4Y-T
SMD5032-4P-40℃~+85℃ 18pF 24MHz 50Ω ±30ppm ±30ppm SMD5032-4P Crystals ROHSAbraconCrystals
ABS07-32.768KHZ-T
SMD3215-2P-40℃~+85℃ 12.5pF 32.768kHz 70kΩ Crystal Oscillator ±20ppm SMD3215-2P Crystals ROHSAbraconCrystals
TPD1E10B06DPYR
X1-SON-2(0.6x1)-40℃~+125℃ 1 100nA 12pF 14V 5.5V 6A@8/20us 6V 90W@8/20us Bidirectional ESD IEC 61000-4-2 X1-SON-2(0.6x1) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C7, C10, C11, C12 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 22uF | Capacitor_SMD:C_0402_1005Metric | C6, C9 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | B3U-1000P | SW_B3U-1000P.:SW_B3U-1000P | S1, S2 |
| 2 | DNP | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 1 | 0850BM14E0016T | Bolun:0850BM14E0016T_JOT-L | U2 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 180 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 3.3V | TestPoint:TestPoint_Pad_2.5x2.5mm | TP1 |
| 1 | 47.5k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 6.8uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 60312202114509 | 60312202114509:60312202114509 | J1 |
| 1 | 68001-606HT | AMPHENOL_68001-606HT:AMPHENOL_68001-606HT | J7 |
| 1 | ABM3C-24.000MHZ-D4Y-T | ABM3C-24-000MHZ-D4Y-T:ABM3C-24.000MHZ-D4Y-T | Y1 |
| 1 | ABS07-32.768KHZ-T | XTAL_ABS07-32.768KHZ-T:XTAL_ABS07-32.768KHZ-T | Y2 |
| 1 | AP2114HA-3.3TRG1 | v reg:SOT-223_DIO-M | U1 |
| 1 | BLM18HE152SN1D | BEADC1608X95N:BEADC1608X95N | FL1 |
| 1 | CC1310F128RGZR | KiCad:QFN50P700X700X100-49N-D | IC1 |
| 1 | TPD1E10B06DPYR | DIO_TPD1E05U06DPYR:DIO_TPD1E05U06DPYR | D1 |
| 1 | VDDR | TestPoint:TestPoint_Pad_2.5x2.5mm | TP2 |
| 1 | WE-SHC-SHIELDING-CABINET | EMF_SHIELD:EMF_SHIELD | |
| 1 | locked | Connector Header 10-pin:SULLINS_GRPB052VWVN-RC | J2 |
| 1 | locked | TE_826926-8:TE_826926-8 | J3 |
| 1 | ~ | TE_6-146278-0:TE_6-146278-0 | J4 |
| 1 | ~ | TE_826926-8:TE_826926-8 | locked |
Questions
How big is the RF Race Car PCB?
It measures 90 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RF Race Car use?
40 parts, built around the 0850BM14E0016T, AP2114HA-3.3TRG1, B3U-1000P and 68001-606HT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RF Race Car KiCad files?
From the dst5rfcar/Car_Pcb repository on GitHub, at the commit this page was made from: the board is RF_Race_Car.kicad_pcb and its schematic RF_Race_Car.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RF Race Car design in my own project?
Its repository states no licence, so its author keeps all rights: ask dst5rfcar before reusing the design.
Similar boards
- 4 layers49.8 × 41.8 mm
Cc1352-swim thermo
mik4el/cc1352-swim-thermo
Software and hardware for dual band radio high accuracy swim thermometer
55 parts2Apache-2.0 - 2 layers100 × 100 mm
- 4 layers38 × 55 mm
- 2 layers53.3 × 22.9 mm
BluePillF4
rogerclarkmelbourne/STM32_Pill_Boards
Various STM32 boards in a form factor similar to the Maple Mini or Blue Pill board
198 parts51 - 2 layers54 × 12.5 mm
BrodBoost C2
axiometa/BrodBoost-C2
USB - C Breadboard Powersupply: BrodBoost-C
31 parts36CERN-OHL-S-2.0 - 4 layers32 × 80 mm
- 4 layers30 × 40 mm
Imu module
bit-bots/bitbots_imu_dxl
The Bitbots IMU DXL module is a Sensor module that can be connected to the Dynamixel Bus (RS485 or TTL).
36 parts4MIT