4 layers35.5 × 14.5 mm
Complete v1.0
drpykachu/Sonar-Watch
A self-designed, home-made watch intended to tell time in a funky and unique way!
225 parts23
4 layers35.5 × 14.5 mm
Complete Watch
drpykachu/Sonar-Watch23A self-designed, home-made watch intended to tell time in a funky and unique way!
- Size
- 35.5 × 14.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 221
- Nets
- 39
- Pads
- 488
- Tracks, vias
- 1,783, 97
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 May 2025
- Updated
- 15 Jan 2026
Overview
Complete Watch is an open-source printed circuit board by drpykachu, from the drpykachu/Sonar-Watch repository on GitHub. It is a 4-layer board of 35.5 × 14.5 mm with 221 parts on 39 nets, routed with 1,783 tracks and 97 vias.
It is built around the ATMEGA4808-AU, DS3231MZ/V+ and RN73H1JTTD5052F50, with the 1N4148WT, BAT-HLD-003-SMT and IRLML6402 among its other parts. Its parts include 201 diodes, 8 resistors, 3 ICs, 2 capacitors and 1 transistor. It belongs with the wearables boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
7
ATMEGA4808-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 20MHz 256Byte 27 48KB 6KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
DS3231MZ/V+
SOIC-8-40℃~+85℃ 2.3V~5.5V Built-in I2C Temperature compensation、Backup power management and battery charging、Alarm function、Locking and tamper-proof、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
RN73H1JTTD5052F50
0603-55℃~+155℃ 100mW 50.5kΩ Metal Film Resistor ±1% ±50ppm/℃ 0603 Chip Resistor - Surface Mount ROHSKOA Speer ElectronicsChip Resistor - Surface Mount
1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching Diodes
BAT-HLD-003-SMT
SMDSMD Blade / Shrapnel Contact Battery Connectors ROHSTE ConnectivityBlade / Shrapnel Contact Battery Connectors
IRLML6402
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 110pF 12nC 145pF 20V 3.7A 400mV 633pF 65mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsRMCF0603FT300K
0603Chip Resistor - Surface MountStackpole Electronics (SEI)
README
README.mdSonar Watch
Hello all!
This project is inspired by something that I wanted to buy, but could not find online - so I decided to make it.
When the button is pressed, the watch sends out a "ping" to find the location of the hour (inner radial dot) and minute (outer radial dot), thus telling the time.
Parts
221| Qty | Value | Footprint | References |
|---|---|---|---|
| 201 | WL-SMCC_0402 | WL-SMCC_0402:WL-SMCC_0402 | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +185 |
| 4 | RN73H1JTTD5052F50 | RN73H1JTTD5052F50:RN73H1JTTD5052F50 | R1, R2, R3, R4 |
| 2 | 1N4148WT | Diode_SMD:D_SOD-523 | DB1, DB2 |
| 2 | GRM21BC81E106ME51K | GRM21BC81E106ME51K:CAPC2012X140N | C1, C2 |
| 2 | RC0201FR-074K7L | RC0201FR_074K7L:RESC0603X26N | R7, R8 |
| 1 | ATMEGA4808-AU | ATMEGA4808-AU:ATMEGA4808-AU | U2 |
| 1 | BAT-HLD-003-SMT | BAT-HLD-003-SMT:BAT_BAT-HLD-003-SMT_CUT | BT1 |
| 1 | DS3231MZ_ | DS3231MZ:DS3231MZ_ | U3 |
| 1 | IRLML6402 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MCP73832T-2ACI_OT | MCP73832T_2ACI_OT:SOT95P270X145-5N | CHG1 |
| 1 | RC1206FR-07120KL | RC1206FR_07120KL:RC1206FR_07120KL | R5 |
| 1 | RMCF0603FT300K | RMCF0603FT300K:RMCF0603FT300K | R6 |
| 1 | TPS7A0230PDBVR | TPS7A0230PDBVR:TPS7A0230PDBVR | U1 |
| 1 | ~ | Button_breakout:BB_B | BB_B1 |
| 1 | ~ | WL-SMCC_0402:Untitled | POGO1 |
More from drpykachu/Sonar-Watch
6- 4 layers35.5 × 14.5 mm
Complete v2.0
drpykachu/Sonar-Watch
A self-designed, home-made watch intended to tell time in a funky and unique way!
221 parts23 - 2 layers60 × 40 mm
NO FullGrid
drpykachu/Sonar-Watch
A self-designed, home-made watch intended to tell time in a funky and unique way!
202 parts23 - 2 layers60 × 40 mm
FullGrid
drpykachu/Sonar-Watch
A self-designed, home-made watch intended to tell time in a funky and unique way!
202 parts23 - 2 layers40 × 30 mm
/Bigger_Test.kicad_pcb.jpg?size=s&soon)
Bigger Test
drpykachu/Sonar-Watch
A self-designed, home-made watch intended to tell time in a funky and unique way!
26 parts23 - 2 layers50 × 50 mm
TestWatch
drpykachu/Sonar-Watch
A self-designed, home-made watch intended to tell time in a funky and unique way!
22 parts23
Similar boards
- 2 layers90.6 × 80.6 mm
555timerCES
liz4662/PBC-Pendant
All design files required to reproduce my PCB pendant, including the schematic, PCB layout, Gerber files, and CNC-friendly SVG files can be found under the 'design' folder.
8 parts - 2 layers51.6 × 63 mm
Smiski workshop
sugar0ats/watt_valentines_day_pcb_workshop
WATT Technical's 2025-2026 Valentine's Day PCBs!
23 parts - 2 layers49.8 × 28.8 mm
- 2 layers100 × 81.3 mm
- 4 layers50 × 50 mm
Watch wearable
TENNLab-UTK/NWRIST
Code and KiCAD PCB design for the NWRIST: Neuromorphic Wearable for Real-Time Intelligent Sensing Technology paper
79 parts - 2 layers55 × 100 mm
- 2 layers41.1 × 27.9 mm
- 4 layers86 × 56 mm
Questions
How big is the Complete Watch PCB?
It measures 35.5 × 14.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Complete Watch use?
221 parts, built around the ATMEGA4808-AU, DS3231MZ/V+, RN73H1JTTD5052F50 and 1N4148WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Complete Watch KiCad files?
From the drpykachu/Sonar-Watch repository on GitHub, at the commit this page was made from: the board is Hardware/Previous Models/Complete v0.1/Complete_Watch.kicad_pcb and its schematic Hardware/Button v1.0/Button_Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Complete Watch design in my own project?
Its repository states no licence, so its author keeps all rights: ask drpykachu before reusing the design.