

Adjustable Power Supply
- Size
- 100 × 81.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 115
- Nets
- 104
- Pads
- 395
- Tracks, vias
- 631, 218
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Jan 2024
- Updated
- 19 Jan 2024
Overview
Adjustable Power Supply is an open-source printed circuit board by gjurgiel, from the gjurgiel/IAP2024_PCB_Design repository on GitHub. It is a 2-layer board of 100 × 81.3 mm with 115 parts on 104 nets, routed with 631 tracks and 218 vias.
It is built around the ESP32-S3-WROOM-1-N4, MAX7219CWG+T and AP2112K-3.3TRG1, with the AP2210N-5.0TRG1, USBLC6-2P6 and CL31A106MBHNNNE among its other parts. Its parts include 31 resistors, 28 capacitors, 11 diodes, 8 ICs and 4 transistors. It belongs with the power boards and the ESP32 boards of this library.
Main components
12ESP32-S3-WROOM-1-N4
SMD,25.5x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMAX7219CWG+T
SOIC-24-300mil0℃~+70℃ 30mA 320mA 4-Wire Serial Interface 4V~5.5V 760mW 8 Segment x 8 Digit Adjustable Glow、Common Cathode SOIC-24-300mil Digital Tube Drivers ROHSMaxim Integrated (Analog Devices)Digital Tube DriversAP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAP2210N-5.0TRG1
SOT-23-40℃~+125℃@(Tj) 1 13.2V 1uA 300mA 400mV@(300mA) 5V 75dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection、Reverse connection protection、Enable Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)CL31A106MBHNNNE
120610uF 50V X5R ±20% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTRMCF0603ZT0R00
0603-55℃~+155℃ 0Ω 100mW 75V Thick Film Resistor 0603 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountRMCF0603FT10K0
0603-55℃~+155℃ 100mW 10kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountLTST-C190GKT
0603-55℃~+85℃ 100mW 130° 2.1V 20mA 565nm 569nm 6mcd Discrete Diode Water Clear Yellow Green 0603 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteRMCF0603FT100K
0603-55℃~+155℃ 100kΩ 100mW 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountBAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky DiodesCC0603JRNPO9BN101
0603100pF 50V NP0 ±5% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
Parts
115| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10uF 50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C20, C21, C22, C23, C28, C35 |
| 7 | 1uF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C8, C27 |
| 5 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R18, R24, R25, R30 |
| 4 | 10kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R21, R28 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4, D10, D11, D12 |
| 3 | 100kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R19 |
| 3 | BAT54 | Package_TO_SOT_SMD:SOT-23 | D5, D8, D9 |
| 2 | 0.1uF 50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26, C32 |
| 2 | 0.1uF 6.3V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C19 |
| 2 | 100pF 50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C31, C33 |
| 2 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15 |
| 2 | 200R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R27 |
| 2 | 5k1R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
| 2 | 680R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R33 |
| 2 | LTC-4727JR | Adjustable_Power_Supply:LTC-4727JR | DS1, DS2 |
| 2 | TSM170N06CP ROG | Package_TO_SOT_SMD:TO-252-2 | Q3, Q4 |
| 1 | 0.47uF 16V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25 |
| 1 | 100mR | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R17 |
| 1 | 10kR | Potentiometer_THT:Potentiometer_TT_P0915N | RV3 |
| 1 | 13mR | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R5 |
| 1 | 15kR | Potentiometer_THT:Potentiometer_TT_P0915N | RV4 |
| 1 | 1R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 1nF 50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C29 |
| 1 | 2.2nF 100V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C30 |
| 1 | 220R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31 |
| 1 | 220uF 50V | Capacitor_SMD:CP_Elec_10x10 | C12 |
| 1 | 22kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 22uF 6.3V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 24kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 3.3V | Adjustable_Power_Supply:TP420X150 | TP5 |
| 1 | 3.3V | Adjustable_Power_Supply:SOD-123_ONS-L | D3 |
| 1 | 300kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 1 | 330uF 35V | Capacitor_SMD:CP_Elec_10x10 | C11 |
| 1 | 33uH | Adjustable_Power_Supply:SRP1265A-330M | L1 |
| 1 | 4.7uF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C37 |
| 1 | 4.99kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 49.9R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 5V | Adjustable_Power_Supply:TP420X150 | TP4 |
| 1 | 62kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 82R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | AOD4189 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | AP2112K-3.3TRG1 | Adjustable_Power_Supply:AP2112K-3.3TRG1 | U4 |
| 1 | AP2210N-5.0TRG1 | Adjustable_Power_Supply:AP2210N-5.0TRG1 | U3 |
| 1 | CM | Adjustable_Power_Supply:TP420X150 | TP11 |
| 1 | COMP | Adjustable_Power_Supply:TP420X150 | TP12 |
| 1 | DFLS1100-7 | Adjustable_Power_Supply:DIO_DFLS1100-7 | D6 |
| 1 | DNP | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C34 |
| 1 | ESP32-S3-WROOM-1-N4 | Adjustable_Power_Supply:ESP32-S3-WROOM-1-N4 | U5 |
| 1 | FB | Adjustable_Power_Supply:TP420X150 | TP10 |
| 1 | FSMSM | Adjustable_Power_Supply:FSMSM | SW1 |
| 1 | GND | Adjustable_Power_Supply:TP420X150 | TP1 |
| 1 | HO | Adjustable_Power_Supply:TP420X150 | TP8 |
| 1 | INA199B1DCKR | Adjustable_Power_Supply:INA199B1DCKR | U1 |
| 1 | I_SENSE | Adjustable_Power_Supply:TP420X150 | TP13 |
| 1 | J109 | Adjustable_Power_Supply:105-0753-001 | J1 |
| 1 | J110 | Adjustable_Power_Supply:105-0753-001 | J4 |
| 1 | LM5117PSQ/NOPB | Adjustable_Power_Supply:LM5117PSQ_NOPB | U8 |
| 1 | LMV431AIMFX_NOPB | Package_TO_SOT_SMD:SOT-23 | IC2 |
| 1 | LO | Adjustable_Power_Supply:TP420X150 | TP9 |
| 1 | LOAD | Adjustable_Power_Supply:TP420X150 | TP16 |
| 1 | MAX7219CWG | Adjustable_Power_Supply:MAX7219 | IC1 |
| 1 | MBRS1100T3G | Adjustable_Power_Supply:SMB_403A-03_ONS-L | D7 |
| 1 | MOSI | Adjustable_Power_Supply:TP420X150 | TP15 |
| 1 | PJ-037A | Adjustable_Power_Supply:PJ-037A | J2 |
| 1 | Q_NPN_CBE | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | REG_OUT | Adjustable_Power_Supply:TP420X150 | TP6 |
| 1 | SCK | Adjustable_Power_Supply:TP420X150 | TP17 |
| 1 | SS34 | Adjustable_Power_Supply:SS34 | D1 |
| 1 | SW | Adjustable_Power_Supply:TP420X150 | TP7 |
| 1 | SW_SPST | Adjustable_Power_Supply:1101M2S3CQE2 | SW3 |
| 1 | SW_SPST | Adjustable_Power_Supply:FSMSM | SW2 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U6 |
| 1 | USB_5V | Adjustable_Power_Supply:TP420X150 | TP3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J3 |
| 1 | V_SENSE | Adjustable_Power_Supply:TP420X150 | TP14 |
| 1 | Vin | Adjustable_Power_Supply:TP420X150 | TP2 |
The 111 most common of 115 parts.
More from gjurgiel/IAP2024_PCB_Design
1- 2 layers21 × 19 mm

Similar boards
- 4 layers99.8 × 94.6 mm

Oresat c3
oresat/oresat-c3-hardware
C3 (Command, Communication, and Control) our Command and Data Handling (C&DH) card.
504 parts27 - 2 layers80.3 × 155 mm

- 2 layers114.9 × 68.5 mm

OhmPrvaFaza
apantelic/ohmsprint_kicad
Energy measurement system designed in KiCad, including schematic, BOM, and 2-layer PCB layout
50 parts - 2 layers79 × 83 mm

- 4 layers61.3 × 44.1 mm

At86rf215-design block
oresat/oresat-kicad
All things KiCAD for OreSat; libraries, tools, settings, etc.
80 parts6 - 2 layers51.5 × 89 mm

- 2 layers91.2 × 108.2 mm

- 4 layers99.8 × 94.6 mm

Oresat live card
oresat/oresat-dxwifi-hardware
OreSat hardware for high speed data communications using 2.4 GHz WiFi.
376 parts19GPL-3.0
Questions
How big is the Adjustable Power Supply PCB?
It measures 100 × 81.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adjustable Power Supply use?
115 parts, built around the ESP32-S3-WROOM-1-N4, MAX7219CWG+T, AP2112K-3.3TRG1 and AP2210N-5.0TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adjustable Power Supply KiCad files?
From the gjurgiel/IAP2024_PCB_Design repository on GitHub, at the commit this page was made from: the board is Adjustable_Power_Supply/Adjustable_Power_Supply.kicad_pcb and its schematic Adjustable_Power_Supply/Adjustable_Power_Supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adjustable Power Supply design in my own project?
Its repository states no licence, so its author keeps all rights: ask gjurgiel before reusing the design.