
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

Software, 3D parts for R2D2
Motor driver is an open-source printed circuit board by dratasich, from the dratasich/r2d2 repository on GitHub, published under the MIT licence. It is a 2-layer board with 19 parts on 18 nets.
It is built around the IRF540N. Its parts include 9 resistors, 4 diodes, 3 connectors, 1 capacitor and 1 IC. It belongs with the robots and motor control boards of this library.
PCB including a single motor driver VNH2SP30-E from STM and some connectors to control a motor with up to 30A.
Uses the stm.lib in the kicad-library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R3, R4, R5 |
| 3 | LED | LEDs:LED-3MM | D1, D2, D3 |
| 2 | 3k3 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R6, R7 |
| 2 | CONN_01X02 | Sockets_MOLEX_KK-System:Socket_MOLEX-KK-RM2-54mm_Lock_2pin_straight | P1, P2 |
| 1 | 100k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R9 |
| 1 | 120R | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R2 |
| 1 | 1k5 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R8 |
| 1 | 1u | Capacitors_ThroughHole:C_Radial_D10_L20_P5 | C1 |
| 1 | 330R | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Angled_1x06 | P3 |
| 1 | IRF540N | TO_SOT_Packages_SMD:TO-252-2Lead | Q1 |
| 1 | VNH2SP30-E | kicad-Housing_SOIC:MultiPowerSO-30_16x17.2mm_Pitch1mm | U1 |
| 1 | ZENER | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D4 |

profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.





AmericanRework/Pico-2x-BLDC
One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.

chgopireddy/Full-Bridge-Class-D-Audio-Amplifier
LTspice Model for Full Bridge Class D, Voltage Mode Control, Peak Current Mode Control

cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
19 parts, built around the IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dratasich/r2d2 repository on GitHub, at the commit this page was made from: the board is pcb/motor-driver/motor-driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).