
PPM Amplifier v2.0
dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer

Design files for a Proton Precession Magnetometer
Pulse Controller is an open-source printed circuit board by dqmcdonald, from the dqmcdonald/ProtonPrecessionMagnetometer repository on GitHub, published under the MIT licence. It is a 2-layer board of 90.2 × 65.1 mm with 39 parts on 38 nets, routed with 344 tracks and 14 vias.
It is built around the 23LC1024-E/P, ZSR330GTA and ZSR500GTA. Its parts include 16 capacitors, 8 connectors, 5 resistors and 5 ICs.
Design files for a Proton Precession Magnetometer
Based on "Signals from the Subatomic World" by Stefan and Richard Hollos https://books.google.co.nz/books/about/Signals_from_the_Subatomic_World_How_to.html
There are several related designs here including SVG files for cutting the coil formers and supports and Kicad files for the pulse controller and signal amplipher.
Hardware:
PPM Amplifier v1.0 - initial failed design for signal amplifier
PPM Amplifier v2.0
PPM Mosfet Bank - PCB for coil switching mosfets
Pulse Controller - Arduino based controller and ADC for data collection
Various design files for polarising and sensor coil formers. Software:
PPMPulseControllerADC - Arduino sketch for pulse control and signal
collection
RPiPythonCode - Python scripts to run on the Raspberry Pi - overall
control and final analysis.There are some KiCad symbols and footprints in other respositories https://github.com/dqmcdonald/DQM_kicad_new.pretty and https://github.com/dqmcdonald/DQM_kicad
Quentin McDonald
October 2024
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C17 |
| 4 | 10uF Tant | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C11, C14, C20 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C16 |
| 3 | 220 Ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5 |
| 2 | 1 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | 1, 2 |
| 1 | 100 Ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 100 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 100nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 1uF 50V Ceramic | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 23LC1024 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | 3 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | 3 |
| 1 | 3000pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 470 Ohm | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | 4N35 | Package_DIP:DIP-6_W7.62mm_LongPads | U3 |
| 1 | Arduino Out 1 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J3 |
| 1 | Arduino Out 2 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J4 |
| 1 | Arduino Pro Mini | DQM_kicad_new:ArduProMini | uP1 |
| 1 | LTC1855 | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U5 |
| 1 | MOSFET Gates | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | Power In | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | P1 |
| 1 | PushButton | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | P2 |
| 1 | RGB LED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Serial | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Signal In | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | ZSR330GTA | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | ZSR500GTA | Package_TO_SOT_SMD:SOT-223 | U2 |
The 38 most common of 39 parts.

dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer

dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer

dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer

dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer



AidanHockey5/STM32_VGM_Player_YM2612_SN76489
A Sega Genesis music player based off of the STM32 BluePill board and real YM2612+SN76489 sound chips.

dankar/altair8800
What started as a Intel 8080 emulator turned into a Altair 8800 emulator with associated hardware for a front panel.

slintak/NPR70
The New Packet Radio on 70 cm band. Based on the project NPR from F4HDK.


partio-scout/scoms-tacnpr
TACNPR by Scoms -- Open hardware high-speed Ethernet/IP data radio for the 433 MHz HAM band, binary-compatible with the original NPR by F4HDK.

It measures 90.2 × 65.1 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the 23LC1024-E/P, ZSR330GTA and ZSR500GTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dqmcdonald/ProtonPrecessionMagnetometer repository on GitHub, at the commit this page was made from: the board is Hardware/Pulse Controller/Pulse Controller.kicad_pcb and its schematic Hardware/PPM Amplifier v1.0/PPM Amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).