

Controller
MEng-a-boys
- Size
- 99.1 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 64
- Pads
- 216
- Tracks, vias
- 338, 32
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Aug 2022
- Updated
- 4 Dec 2025
Overview
Controller is an open-source printed circuit board by LukeDWaller99, from the LukeDWaller99/MEng-a-boys repository on GitHub. It is a 2-layer board of 99.1 × 99.1 mm with 64 parts on 64 nets, routed with 338 tracks and 32 vias.
It is built around the LM358DR2GH, ZLDO1117G50TA and ZSR330GTA, with the S9013 among its other parts. Its parts include 26 resistors, 11 capacitors, 7 diodes, 5 ICs and 3 transistors.
Main components
4LM358DR2GH
SOIC-80℃~+70℃ 1.5mA 2 2mV 3V~32V 40mA 45nA 5nA 70dB 7uV/℃ Built-in compensation、ESD Protection SOIC-8 Operational Amplifier ROHSonsemiOperational AmplifierZLDO1117G50TA
SOT-223-40℃~+125℃@(Tj) 1 1.2V@(1A) 18V 1A 4mA 5V 80dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsZSR330GTA
SOT-223-55℃~+125℃@(Tj) 1 200mA 20V 3.3V 50uVrms 600uA 64dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsS9013
SOT-23-55℃~+150℃ 1 NPN 100nA 120 150MHz 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
README
README.mdMEng-a-boys
MEng-a-boys
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C12, C13 |
| 8 | 2K2 | Resistor_SMD:R_0603_1608Metric | R1, R11, R13, R14, R19, R20, R24, R28 |
| 6 | 10K | Resistor_SMD:R_0603_1608Metric | R10, R12, R15, R16, R21, R26 |
| 4 | 620 | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5 |
| 4 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | Btn_1, Btn_2, Btn_3, RESET1 |
| 3 | 4K7 | Resistor_SMD:R_0603_1608Metric | R6, R9, R30 |
| 3 | S9013 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R17, R18 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R29, R31 |
| 2 | B5817W-5819W | Diode_SMD:D_SOD-123 | D2, D6 |
| 2 | BLUE | LED_SMD:LED_0603_1608Metric | D5, D7 |
| 2 | Bat_18650 | My_library:18650_Holder(1) | BT1, BT2 |
| 2 | Joystick | My_library:Joystick | U1, U2 |
| 2 | SW_SPDT | My_library:KNX-1-D1 | PWR_SW1, SW1 |
| 2 | YELLOW | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 1 | 20K | My_library:Variable_Resistor | RV1 |
| 1 | 40K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | Buzzer | My_library:Buzzer | BZ1 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LM358DR2G | Package_SO:SOP-8_3.76x4.96mm_P1.27mm | U4 |
| 1 | NUCLEO-L432KC | My_library:NUCELO-L432KC_SMD | A1 |
| 1 | ZLDO1117G50TA | Package_TO_SOT_SMD:SOT-223 | U5 |
| 1 | ZSR330GTA | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | nRF24L01_Conn | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical_SMD | J1 |
More from LukeDWaller99/MEng-a-boys
1- 2 layers68.6 × 99.1 mm

Similar boards
- 2 layers90.2 × 65.1 mm

Pulse Controller
dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer
39 partsMIT - 2 layers96.5 × 35.6 mm

- 2 layers129.7 × 60 mm

Carte Capteurs
INSA-GEI/insa-nxpcup
Dépôt du département GEI de l'INSA Toulouse pour la compétition NXPCup
52 parts9GPL-3.0 - 2 layers100 × 100 mm

- 2 layers80 × 36 mm

Freepdk
pacmancoder/easy-pdk-mini
Padauk MCU programmer variant for hand soldering.
60 parts21CC-BY-SA-4.0 - 2 layers49 × 67 mm

Calliope mirror heater
openUC2/TechnicalDocs-openUC2-HoloBox
This is the holographic box for openUC2
67 parts5 - 4 layers110 × 36.6 mm

XL4015-DC DC Buck Converter Schematic
ajvizganapathy-pixel/XL4015-BuckConverter-5A-PCB
XL4015 5A step-down buck converter — KiCad PCB, gerbers, datasheets
29 parts - 4 layers130 × 150 mm

Campervan management V2
akladnig/CamperVan
- CamperVan Design and Arduino Circuit Design - Campervan Design Overview - Dashboard App - Electrical System - Sensors - Circuit Design - Battery and voltage monitoring - Voltage Divider Design - Low Pass Filter - TODO
183 parts
Questions
How big is the Controller PCB?
It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
64 parts, built around the LM358DR2GH, ZLDO1117G50TA, ZSR330GTA and S9013. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the LukeDWaller99/MEng-a-boys repository on GitHub, at the commit this page was made from: the board is Controller/PCB/controller/controller.kicad_pcb and its schematic Controller/PCB/controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask LukeDWaller99 before reusing the design.