
PPM Amplifier
dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer

Design files for a Proton Precession Magnetometer
PPM Amplifier v2.0 is an open-source printed circuit board by dqmcdonald, from the dqmcdonald/ProtonPrecessionMagnetometer repository on GitHub, published under the MIT licence. It is a 2-layer board of 130 × 60 mm with 48 parts on 53 nets, routed with 149 tracks and 6 vias.
It is built around the OP177G and 42TL016-RC. Its parts include 25 capacitors, 9 connectors, 4 resistors, 3 ICs and 2 diodes. It belongs with the audio and music boards of this library.
Design files for a Proton Precession Magnetometer
Based on "Signals from the Subatomic World" by Stefan and Richard Hollos https://books.google.co.nz/books/about/Signals_from_the_Subatomic_World_How_to.html
There are several related designs here including SVG files for cutting the coil formers and supports and Kicad files for the pulse controller and signal amplipher.
Hardware:
PPM Amplifier v1.0 - initial failed design for signal amplifier
PPM Amplifier v2.0
PPM Mosfet Bank - PCB for coil switching mosfets
Pulse Controller - Arduino based controller and ADC for data collection
Various design files for polarising and sensor coil formers. Software:
PPMPulseControllerADC - Arduino sketch for pulse control and signal
collection
RPiPythonCode - Python scripts to run on the Raspberry Pi - overall
control and final analysis.There are some KiCad symbols and footprints in other respositories https://github.com/dqmcdonald/DQM_kicad_new.pretty and https://github.com/dqmcdonald/DQM_kicad
Quentin McDonald
October 2024
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C21, C22, C23, C24, C25 |
| 6 | 10uF | Capacitor_SMD:CP_Elec_6.3x5.2 | C13, C14, C15, C16, C18, C19 |
| 3 | +12V | DQM:Conn1 SMD | J3, J4, J5 |
| 3 | -12V | DQM:Conn1 SMD | J1, J6, J7 |
| 2 | 5.11 1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 9.1V | DQM:D_DO-41_SMD | D1, D2 |
| 2 | ~ | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U1, U2 |
| 1 | 0.001uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 0.0022uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 0.0039uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 0.0056 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 0.01uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 0.022uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 0.039uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 0.056uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 0.22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 0.39uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 0.56uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10.2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 10.2K 1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 42TL016 | DQM:Transformer_42TL016_SMD | T1 |
| 1 | GND | DQM:3MM Pad | J8 |
| 1 | OP177G | DQM:DIP-8_SMD | U3 |
| 1 | SW_DIP_x12 | Button_Switch_SMD:SW_DIP_SPSTx12_Slide_6.7x32.04mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 1 | Signal In | DQM:Conn3 SMD | J2 |
| 1 | Signal Out | DQM:Conn2 SMD | P2 |
The 45 most common of 48 parts.

dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer

dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer

dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer

dqmcdonald/ProtonPrecessionMagnetometer
Design files for a Proton Precession Magnetometer

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing



softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

loxodes/vna
Under development open hardware microwave vector network analyzer

fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki
It measures 130 × 60 mm and has 2 copper layers, 1.6 mm thick.
48 parts, built around the OP177G and 42TL016-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dqmcdonald/ProtonPrecessionMagnetometer repository on GitHub, at the commit this page was made from: the board is Hardware/PPM Amplifier v2.0/PPM Amplifier v2.0.kicad_pcb and its schematic Hardware/PPM Amplifier v1.0/PPM Amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).