
Panelboard
doug7410/nowplaying-appliance
Build guide, BOM and hardware for the Now-Playing desk appliance: HUB75 spectrum + touch now-playing display driven by room-mic song recognition

Build guide, BOM and hardware for the Now-Playing desk appliance: HUB75 spectrum + touch now-playing display driven by room-mic song recognition
Carrier board is an open-source printed circuit board by doug7410, from the doug7410/nowplaying-appliance repository on GitHub, published under the MIT licence. It is a 2-layer board of 140 × 100 mm with 31 parts on 46 nets, routed with 160 tracks and 10 vias.
It is built around the 470UF 10V 6.3*7, AOD403 and B8B-XH-A(LF)(SN), with the B6B-XH-A(LF)(SN) and B5B-XH-A(LF)(SN) among its other parts. Its parts include 9 capacitors, 7 resistors and 1 transistor. It belongs with the computers and single-board computers boards and the ESP32 boards of this library.
Adapter that mounts the proven round INMP441 I2S MEMS breakout (Ø14 mm, two
1×3 rows at 7.62 mm) and brings it out to a 6-pin JST-XH matching the carrier
board's J_MIC pinout, 1:1 cable:
| J1 pin | Net | J1 pin | Net | |
|---|---|---|---|---|
| 1 | MIC_SCK | 4 | GND | |
| 2 | MIC_WS | 5 | P3V3 | |
| 3 | MIC_SD | 6 | GND |
digitalmic.type=1 and the Board 1 smoketest wiring.Built headlessly (kicad-cli 10); make check runs ERC + DRC (0 violations,
schematic parity clean), make zip builds mic-board-jlc.zip for JLCPCB
(2 layers, 20 × 38 mm, 1.6 mm, HASL — bare board, hand-solder the two headers
and the XH).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 6 | 10nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6 |
| 3 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3V3, C7, CB2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RG |
| 1 | 470uF/10V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | CB1 |
| 1 | AOD403 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | Q1 |
| 1 | DC IN 5V | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical | J_PWR |
| 1 | ESP 5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | ESP32-S3 J1 | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J_ESP_L |
| 1 | ESP32-S3 J3 | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J_ESP_R |
| 1 | HUB75 | Connector_IDC:IDC-Header_2x08_P2.54mm_Latch_Vertical | J_HUB |
| 1 | KNOBS | Connector_JST:JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J_KNOBS |
| 1 | MASTER SW | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical | J_SW |
| 1 | MIC | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J_MIC |
| 1 | PANEL 5V | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical | J_PANEL |
| 1 | PI 2/4/6/8/10 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J_PI |
| 1 | PI 5V A | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | PI 5V B | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |

doug7410/nowplaying-appliance
Build guide, BOM and hardware for the Now-Playing desk appliance: HUB75 spectrum + touch now-playing display driven by room-mic song recognition

doug7410/nowplaying-appliance
Build guide, BOM and hardware for the Now-Playing desk appliance: HUB75 spectrum + touch now-playing display driven by room-mic song recognition

doug7410/nowplaying-appliance
Build guide, BOM and hardware for the Now-Playing desk appliance: HUB75 spectrum + touch now-playing display driven by room-mic song recognition




oudehm/seniorDesignPCB
Editable KiCad projects for the brain, light, power, and pump boards.


offgridevices/offgrid-hardware
Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.


AngelDMercedes/UNS_SBCPWRDIST
These are the design files for a DIY power distribution board for Single Board Computers powered by an ATX PSU
It measures 140 × 100 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the 470UF 10V 6.3*7, AOD403, B8B-XH-A(LF)(SN) and B6B-XH-A(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the doug7410/nowplaying-appliance repository on GitHub, at the commit this page was made from: the board is hardware/carrier-board/carrier-board.kicad_pcb and its schematic hardware/carrier-board/carrier-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).