Skip to the content
2 layers90 × 30 mmController, the printed circuit board in 3D
Size
90 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
23
Pads
66
Tracks, vias
183, 26
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
2 Jan 2018
Updated
2 Jan 2018

Overview

Controller is an open-source printed circuit board by domenipavec, from the domenipavec/avr-snow repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 30 mm with 21 parts on 23 nets, routed with 183 tracks and 26 vias.

It is built around the ATTINY841-SSU and RJ45. Its parts include 14 connectors, 3 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Parts

21
QtyValueFootprintReferences
12Conn_01x01Measurement_Points:Measurement_Point_Square-SMD-Pad_BigJ1, J2, J3, J4, J5, J6, J7, J8, J10, J11, J12, J13
2100nCapacitors_SMD:C_0603_HandSolderingC2, C3
1100uCapacitors_THT:CP_Radial_D6.3mm_P2.50mmC1
174LS138Housings_SOIC:SOIC-16W_5.3x10.2mm_Pitch1.27mmU2
1ATTINY841-SSUHousings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mmU1
1Conn_01x06Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mmJ14
1RJ45rj45:RJ45J9

The 19 most common of 21 parts.

More from domenipavec/avr-snow

1
  • 2 layers240 × 200 mmLed matrix, the printed circuit board in 3D

    Led matrix

    domenipavec/avr-snow

    141 partsMIT

Similar boards

  • 2 layers33 × 51.6 mmTpms silencer, the printed circuit board in 3D

    Tpms silencer

    gcormier/tpms_silencer

    Spoof TPMS sensors to prevent blinking lights/etc

    27 parts20
  • 2 layersHeadlamp, the printed circuit board in 3D

    Headlamp

    kajusK/Darkstar-Mk.II

    High-power bomb-proof headlamp for caving

    60 parts7
  • 2 layers65 × 56 mmRaspberryPi UPS HAT, the printed circuit board in 3D

    RaspberryPi UPS HAT

    gvoigtlaender/RaspberryPi_UPS_HAT

    RaspberryPi UPS HAT

    63 parts4GPL-3.0
  • 2 layers29.8 × 20.3 mmFranzininho tiny841, the printed circuit board in 3D

    Franzininho tiny841

    Franzininho/Franzininho-Tiny

    Repositório para Franzininho Tiny - Uma placa com attiny841 da família Franzinho

    22 parts3
  • 2 layers65 × 56 mmPi supercap ups, the printed circuit board in 3D

    Pi supercap ups

    mairas/pi-super-ups

    Power Monitor for Raspberry Pi and SignalK

    92 parts2BSD-3-Clause
  • 2 layers26.7 × 20.3 mmIsp, the printed circuit board in 3D

    Isp

    captdam/AVR441ISP

    24 parts1
  • 2 layers49.5 × 49.5 mmPcb workshop sensor, the printed circuit board in 3D

    Pcb workshop sensor

    BarnabyShearer/pcb_workshop_sensor

    Simple lowpower MSP and Temp sensor PCB for a PCB design workshop.

    31 parts

Questions

How big is the Controller PCB?

It measures 90 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Controller use?

21 parts, built around the ATTINY841-SSU and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller KiCad files?

From the domenipavec/avr-snow repository on GitHub, at the commit this page was made from: the board is kicad/controller/controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).