
LED Current Sense
dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

Circuit and PCB Designs, anything else related to radio and electronics
MAFSK is an open-source printed circuit board by dolson14, from the dolson14/k7arx repository on GitHub. It is a 2-layer board of 110 × 90 mm with 76 parts on 75 nets, routed with 443 tracks and 45 vias.
It is built around the TS5A2066YZP, SN74AHC1G14DBV and SN74AHC1G32DBV, with the TS5A1066DBV among its other parts. Its parts include 32 resistors, 15 capacitors, 10 ICs, 5 connectors and 5 switches. It belongs with the radio and wireless boards and the MSP430 boards of this library.
A place to keep research and work on various electronics and radio projects.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | R | Resistors_SMD:R_1206_HandSoldering | R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R27, R28, R29 +3 |
| 8 | 40.2k | Resistors_SMD:R_1206_HandSoldering | R5, R6, R7, R8, R9, R10, R11, R12 |
| 4 | 1.8nF | Capacitors_SMD:C_1206_HandSoldering | C9, C10, C11, C12 |
| 4 | 103.3k | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3, R4 |
| 4 | 2.2nF | Capacitors_SMD:C_1206_HandSoldering | C1, C2, C3, C4 |
| 4 | 3.3nF | Capacitors_SMD:C_1206_HandSoldering | C5, C6, C7, C8 |
| 4 | OPA4322 | texas-instruments:PW-14 | U1, U2, U3, U4 |
| 4 | TactileSwitch_NO | k7arx:SPST-D6xxx | S1, S2, S3, S4 |
| 3 | 1.5M | Resistors_SMD:R_1206_HandSoldering | RG1, RG2, RG3 |
| 3 | 360k | Resistors_SMD:R_1206_HandSoldering | RF1, RF2, RF3 |
| 2 | TS5A2066 | texas-instruments:DCT | U6, U7 |
| 1 | 0.1uF | Capacitors_SMD:C_1206_HandSoldering | C14 |
| 1 | 100nF | Capacitors_SMD:C_1206_HandSoldering | C15 |
| 1 | 20k | k7arx:POT-3352T | RV1 |
| 1 | 330 | Resistors_SMD:R_1206_HandSoldering | R26 |
| 1 | Audio Out | k7arx:Jack-TRS-SJ1-3523N | J1 |
| 1 | C | Capacitors_SMD:C_1206_HandSoldering | C13 |
| 1 | Crystal | k7arx:XTAL-CMR200T | X1 |
| 1 | LCD Header | k7arx:LCD-1602A | P1 |
| 1 | LED | LEDs:LED-0805 | D1 |
| 1 | MSP430G2513 | texas-instruments:PW-28 | U8 |
| 1 | Paddle Input | k7arx:Jack-TRS-SJ1-3523N | J2 |
| 1 | SBW JTAG | Pin_Headers:Pin_Header_Straight_1x04 | P3 |
| 1 | SN74AHC1G14 | texas-instruments:DBV | U5 |
| 1 | SN74AHC1G32 | texas-instruments:DBV | U9 |
| 1 | TS5A1066 | texas-instruments:DBV | U10 |
| 1 | TactileSwitch_NO | k7arx:SPST-EVQ2 | S5 |
| 1 | UART | Pin_Headers:Pin_Header_Straight_1x03 | P2 |

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics

TobiasNetzer/nanoLogger
Here is a simplified block diagram of the data logger. To measure the current of a device, the data logger is simply connected in series between the voltage source and the DUT/load.

introlab/t-top
T-Top is a tabletop robot designed with advanced audio and vision sensors, deep learning perceptual processing and telecommunication capabilities to provide richer interaction modalities and develop higher cognitive…

anvargasl/CosmicWatch-gamma-spectroscopy-PCB
Handling versions of CosmicWatch pcb design, reusing V2 DC to DC booster and implementing new peak detection designa.


joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

jpconstantineau/ErgoTravel
A Portable Ergonomic Split Keyboard inspired from the ErgoDox, Let's Split and Minidox

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 110 × 90 mm and has 2 copper layers, 1.6 mm thick.
76 parts, built around the TS5A2066YZP, SN74AHC1G14DBV, SN74AHC1G32DBV and TS5A1066DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dolson14/k7arx repository on GitHub, at the commit this page was made from: the board is projects/MAFSK/MAFSK.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dolson14 before reusing the design.