2 layers146.7 × 121.9 mm
2 layers146.7 × 121.9 mm
DFboard2
dmrossman/DataFlowCreating a clone of DataFlow for NV10 implanters from scratch
- Size
- 146.7 × 121.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 111
- Pads
- 215
- Tracks, vias
- 422, 63
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Oct 2024
- Updated
- 11 Oct 2026
Overview
DFboard2 is an open-source printed circuit board by dmrossman, from the dmrossman/DataFlow repository on GitHub. It is a 2-layer board of 146.7 × 121.9 mm with 42 parts on 111 nets, routed with 422 tracks and 63 vias.
It is built around the JUMPER3 and TX 1. Its parts include 6 ICs, 5 resistors, 5 diodes and 3 connectors.
Main components
2Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 4 | ~ | Misc:Max3232 | U2, U3, U4, U5 |
| 3 | Jumper3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1, JP3, JP4 |
| 3 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2, JP5, JP7 |
| 2 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP8, JP9 |
| 2 | Power | Misc:PowerPal | U1, U6 |
| 1 | 110-43-648-41-001000 | 110-43-648-41-001000:DIPS1524W51P254L6096H419Q48N | J13 |
| 1 | AMU | digikey-footprints:LED_0603 | D2 |
| 1 | Beam | digikey-footprints:LED_0603 | D3 |
| 1 | DB25_Plug_MountingHoles_Male | Connector_Dsub:DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J1 |
| 1 | DB25_Receptacle_MountingHoles_Female | Connector_Dsub:DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J2 |
| 1 | Dose | digikey-footprints:LED_0603 | D1 |
| 1 | ES | digikey-footprints:LED_0603 | D5 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP16 |
| 1 | RX1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | RX2 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | RX3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP5 |
| 1 | RX4 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP7 |
| 1 | RX5 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP12 |
| 1 | RX6 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP11 |
| 1 | RX7 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP9 |
| 1 | RX8 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP10 |
| 1 | TX1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | TX2 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP4 |
| 1 | TX3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP6 |
| 1 | TX4 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP8 |
| 1 | TX5 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP14 |
| 1 | TX6 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP13 |
| 1 | Vac | digikey-footprints:LED_0603 | D4 |
Questions
How big is the DFboard2 PCB?
It measures 146.7 × 121.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DFboard2 use?
42 parts, built around the JUMPER3 and TX 1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DFboard2 KiCad files?
From the dmrossman/DataFlow repository on GitHub, at the commit this page was made from: the board is DFboard2/DFboard2.kicad_pcb and its schematic DFboard/DFboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DFboard2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask dmrossman before reusing the design.
More from dmrossman/DataFlow
1Similar boards
- 4 layers70 × 70 mm
1.Electronics
I-M-Robotics-Lab/STM32-Quadcopter
Quadcopter design based on STM32F411CEU Blackpill flight controller. Compatible with INAV 6.0 firmware.
57 parts80GPL-3.0 - 2 layers91.4 × 73.7 mm
- 4 layers30.9 × 30.9 mm
Fpv video in v1
Cinetronix/fpv-video-in-v1
KiCad hardware design for an HDMI-to-MIPI CSI bridge board, designed for FPV camera systems.
48 parts11 - 2 layers
- 2 layers10.6 × 18.5 mm
Asmartcap xMoto
xpix/XMOTO_TINYAVR
This code is designed for a motor controller and has merged the PID code of Josh Kopel with the code of the Makerbot servo-controller board. This code can be used on some boards by changing some values.
21 parts6 - 4 layers79 × 93 mm
WeatherStation
hcmusthinhcode2k2/WeatherStation_Thesis
Graduation thesis topic is the design of a weather monitoring station using NB-IoT technology
203 parts2 - 2 layers50 × 80 mm
- 4 layers79 × 76.7 mm
