2 layers57.4 × 12 mm
2 layers
Schwinn ecotour2
DMessham/DMessham.github.ioMy Website
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 42
- Pads
- 100
- Tracks, vias
- 176, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Sep 2021
- Updated
- 23 Oct 2023
Overview
Schwinn ecotour2 is an open-source printed circuit board by DMessham, from the DMessham/DMessham.github.io repository on GitHub. It is a 2-layer board with 15 parts on 42 nets, routed with 176 tracks and 0 vias.
It is built around the SM351LT. Its parts include 5 connectors, 5 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdDmessham.github.io
This is my github page used as a landing page, and for hosting my publicaly available content
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 5vin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Arduino_Nano | Module:Arduino_Nano | A1 |
| 1 | Down / - | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW2 |
| 1 | Enter | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW3 |
| 1 | SM351LT | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Horizontal | U1 |
| 1 | Up / + | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | WC1602A | Display:WC1602A | DS1 |
| 1 | brakesw | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | brightness | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV2 |
| 1 | contrast | Potentiometer_SMD:Potentiometer_ACP_CA6-VSMD_Vertical_Hole | RV1 |
| 1 | headlight | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Horizontal | J5 |
| 1 | headlights | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical | SW5 |
| 1 | misclights | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Horizontal | J11 |
| 1 | serial | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | turn signals | Connector_PinSocket_1.27mm:PinSocket_2x03_P1.27mm_Horizontal | SW4 |
Questions
What parts does the Schwinn ecotour2 use?
15 parts, built around the SM351LT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Schwinn ecotour2 KiCad files?
From the DMessham/DMessham.github.io repository on GitHub, at the commit this page was made from: the board is Projects/Ebike/schwinn-ecotour/schwinn-ecotour2.kicad_pcb and its schematic Projects/Ebike/schwinn-ecotour/schwinn-ecotour.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Schwinn ecotour2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask DMessham before reusing the design.
Similar boards
- 2 layers183 × 101 mm
- 2 layers12.4 × 13 mm
- 2 layers205 × 170 mm
Echessboard
benjibst/echessboard
electronic chess board schematic and PCB layout using STM32 microcontroller and hall sensors for detecting pieces
165 parts1 - 2 layers87.7 × 254.8 mm
- 2 layers20 × 20 mm
B SM351LT BRK-01MBR R01
Boardoza/Boardoza_SM351LT_Hall_Effect_Sensor_Breakout_Board
A compact hall-effect sensor module for detecting lid, door, and drawer positions with omnipolar sensing.
10 partsCC-BY-SA-4.0 - 4 layers184.3 × 131 mm
- 4 layers174 × 71 mm
DrinkMix CM4 Prototype
wbsipz/hardware-design-portfolio
Hardware design portfolio featuring power electronics, embedded control, and PCB projects.
134 parts