Thumb cluster
dlip/harite-v3-pcb
Adapted from https://github.com/dbenoy/thumbstick-breakout to include a FPC connector

Adapted from https://github.com/dbenoy/thumbstick-breakout to include a FPC connector
Right is an open-source printed circuit board by dlip, from the dlip/harite-v3-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 83.1 × 52.3 mm with 31 parts on 55 nets, routed with 674 tracks and 100 vias.
It is built around the AFC01-S06FCC-00, AFC01-S12FCC-00 and MSK12C02, with the TYPE-C-31-M-12 among its other parts. Its parts include 16 diodes, 4 switches and 1 IC. It belongs with the ESP32 boards of this library.
Adapted from https://github.com/dbenoy/thumbstick-breakout to include a FPC connector
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1N4148W_C917030 | easyeda2kicad:SOD-123_L2.8-W1.8-LS3.7-RD-1 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 4 | MountingHole | footprints:MountingHole_2.2mm_M2_Pad_Via | H3, H4, H5, H6 |
| 4 | ~ | footprints:mouse-switch-cluster | SW1, SW2, SW3, SW4 |
| 1 | + | footprints:BatteryPad | H2 |
| 1 | - | footprints:BatteryPad | H1 |
| 1 | AFC01-S06FCC-00 | easyeda2kicad:FPC-SMD_AFC01-S06FCC-00 | FPC2 |
| 1 | AFC01-S12FCC-00 | easyeda2kicad:FPC-SMD_AFC01-S12FCC-00 | FPC1 |
| 1 | MSK12C02 | easyeda2kicad:SW-TH_MSK12C02 | PW1 |
| 1 | TYPE-C-31-M-12 | easyeda2kicad:USB-C_SMD-TYPE-C-31-M-12 | USBC1 |
| 1 | XIAO-ESP32-S3-Plus-SMD | footprints:XIAO-nRF52840-Plus-SMD | U1 |
dlip/harite-v3-pcb
Adapted from https://github.com/dbenoy/thumbstick-breakout to include a FPC connector
dlip/harite-v3-pcb
Adapted from https://github.com/dbenoy/thumbstick-breakout to include a FPC connector



JanClyde05/Road-Accident-Monitoring-System
This directory contains the planning, specification, and initial KiCad project for RAMS Wearable PCB Revision C. Do not fabricate from this directory yet -- manual schematic wiring and DRC verification are still needed.


ArgonautGit/wallet_dmm
A multimeter the size of a credit card: DC volts, resistance, continuity and diode test, shown on a 0.91" OLED, with three buttons, an RGB LED and a piezo beeper.

DomPka/LuxLibre
Pick a light · Compare · Web apps · Firmware · Design your own · Build a FlashKa · Repository map · Help

gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

louisflakes/IphoneFM
KiCad project for IphoneFM Rev A. Built step by step from ../../design/rev-a/kicad-build-procedure.md; checked with ../../tools/kicadcheck.py.
It measures 83.1 × 52.3 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the AFC01-S06FCC-00, AFC01-S12FCC-00, MSK12C02 and TYPE-C-31-M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dlip/harite-v3-pcb repository on GitHub, at the commit this page was made from: the board is kicad/right/right.kicad_pcb and its schematic kicad/left/left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).