

Bindec
Repository for kicad designs (mainly Eurorack modules)
- Size
- 102.8 × 128.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 31
- Pads
- 123
- Tracks, vias
- 233, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Sep 2022
- Updated
- 17 Oct 2022
Overview
Bindec is an open-source printed circuit board by dlawle, from the dlawle/kicad-designs repository on GitHub. It is a 2-layer board of 102.8 × 128.4 mm with 46 parts on 31 nets, routed with 233 tracks and 0 vias.
It is built around the ICM7555N, L7805 and BAT85. Its parts include 9 resistors, 7 diodes, 7 connectors, 5 capacitors and 3 ICs.
Main components
3ICM7555N
DIP-8-40℃~+85℃ 1 30uA 4.5V~15V Adjustable duty cycle oscillation DIP-8 555 Timers / Counters ROHSHGSEMITimers / CountersL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBAT85
DO-341 Independent 200mA 2uA@25V 30V 5A 800mV@100mA DO-34 Schottky Diodes ROHSNexperiaSchottky Diodes
README
bindec/README.mdA simple CMOS 555 clock with a CD4029 presettable up/down counter (binary and decade options)
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k | benjiaomodular:Resistor_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R8, R9 |
| 3 | SW_SPDT | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | SW1, SW2, SW3 |
| 2 | 100n | benjiaomodular:Capacitor_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C5 |
| 2 | 10k | benjiaomodular:Resistor_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7 |
| 1 | 10u | benjiaomodular:Capacitor_Radial_D5.0mm_P2.5mm | C3 |
| 1 | 1u | benjiaomodular:Capacitor_Radial_D5.0mm_P2.5mm | C4 |
| 1 | 22u | benjiaomodular:Capacitor_Disc_D3.8mm_W2.6mm_P2.50mm | C1 |
| 1 | 250k | benjiaomodular:Potentiometer_RV09 | RV1 |
| 1 | 4029 | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | BAT85 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | C1 | benjiaomodular:AudioJack_3.5mm | J2 |
| 1 | C1_LED | LED_THT:LED_D3.0mm | D2 |
| 1 | C2 | benjiaomodular:AudioJack_3.5mm | J3 |
| 1 | C2_LED | LED_THT:LED_D3.0mm | D3 |
| 1 | C3 | benjiaomodular:AudioJack_3.5mm | J5 |
| 1 | C3_LED | LED_THT:LED_D3.0mm | D5 |
| 1 | C4 | benjiaomodular:AudioJack_3.5mm | J6 |
| 1 | C4_LED | LED_THT:LED_D3.0mm | D6 |
| 1 | CARRY_LED | LED_THT:LED_D3.0mm | D7 |
| 1 | CLOCK | benjiaomodular:AudioJack_3.5mm | J4 |
| 1 | CL_LED | LED_THT:LED_D3.0mm | D4 |
| 1 | Carry | benjiaomodular:AudioJack_3.5mm | J7 |
| 1 | Conn_02x05_Top_Bottom | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | ICM7555 | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
The 35 most common of 46 parts.
More from dlawle/kicad-designs
1- 2 layers137.5 × 128.7 mm

Similar boards
- 2 layers

- 2 layers98.4 × 93.8 mm

- 2 layers14.5 × 8.6 mm

Getting to blinky
ALeggeUp/getting-to-blinky
This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons, PO Box…
17 partsCC-BY-SA-4.0 - 2 layers74.9 × 65 mm

- 2 layers54.9 × 85.9 mm

- 2 layers43.2 × 43.2 mm

Test1
PStinno/led-spinner-pcb
My first two layer PCB, spinning LED effect with no micro-controller or code.
27 partsCC-BY-SA-4.0 - 2 layers63 × 88 mm

Paragon
timbalicious/netrunner_paragon_pcb
Possibly functional PCB alt-art Paragon for the Netrunner LCG
128 parts - 2 layers80 × 110 mm

Questions
How big is the Bindec PCB?
It measures 102.8 × 128.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bindec use?
46 parts, built around the ICM7555N, L7805 and BAT85. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bindec KiCad files?
From the dlawle/kicad-designs repository on GitHub, at the commit this page was made from: the board is bindec/bindec.kicad_pcb and its schematic 4drum/4drum.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bindec design in my own project?
Its repository states no licence, so its author keeps all rights: ask dlawle before reusing the design.