

Nes input
Nestronic Game Music Synthesizer Alarm Clock
- Size
- 101.6 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 18
- Pads
- 125
- Tracks, vias
- 187, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Jun 2018
- Updated
- 14 Jun 2025
Overview
Nes input is an open-source printed circuit board by dkonigsberg, from the dkonigsberg/nestronic repository on GitHub. It is a 2-layer board of 101.6 × 38.1 mm with 30 parts on 18 nets, routed with 187 tracks and 16 vias.
It is built around the TSL25911FN and TCA8418RTW. Its parts include 8 switches, 3 resistors, 2 capacitors, 2 ICs and 2 connectors. It belongs with the retro computing and games boards and the ESP32 boards of this library.
Main components
2TSL25911FN
DFN-6(2x2.2)-30℃~+70℃ 2.7V~3.6V I2C Light Intensity DFN-6(2x2.2) Ambient Light Sensors ROHSAdvanced Monolithic SystemsAmbient Light SensorsTCA8418RTW
WQFN-24-EP(4x4)-40℃~+85℃ 1.65V~3.6V 18 1MHz I2C Input anti-jitter、Keyboard matrix scanning Interrupt Output Open-drain WQFN-24-EP(4x4) I/O Expanders ROHSTexas InstrumentsI/O Expanders
README
README.mdNestronic Game Music Synthesizer Alarm Clock

Introduction
A good overview of the project can be found in these blog posts:
- Introducing the Nestronic
- Nestronic System Architecture
- Building the Nestronic Prototype
- Nestronic Input Board
A few videos demonstrating the project are here:
- First end-to-end test
- DuckTails!
- First prototype assembled and working!
- Completed case, buttons, and Blaster Master!
- Nestronic Complete Assembly
Project Layout
Hardware
The "hardware" directory contains KiCad projects with the complete circuit schematics, bill-of-materials, and PCB layouts.
There are two circuit boards, the main board and the input board. The main board contains the majority of the system, while the input board handles buttons and anything else that needs to be placed on the top shell of the enclosure.
Software
The "software" directory contains all the source code for the firmware that runs on the hardware. The "2a03" subdirectory contains code for the RP2A03 CPU (a.k.a. NES APU), while the "esp32" subdirectory contains code for the modern ESP32 microcontroller that drives the rest of the system.
Models
The "models" directory contains any CAD models and related resources necessary to physically assemble the project. This may be sparse for now, but will be filled out over time.
Credits
ESP32 schematic symbols and footprints originally from: https://github.com/adamjvr/ESP32-kiCAD-Footprints
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm_M3_Pad_Via | MountingHole:MountingHole_3.2mm_M3_Pad_Via | REF1, REF2, REF3, REF4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 2 | LOGO | lib_fp:LOGO | G***, G*** |
| 2 | LOGO | lib_fp:LogicProbe | G***, G*** |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | A | Button_Switch_THT:SW_PUSH_6mm | SW8 |
| 1 | B | Button_Switch_THT:SW_PUSH_6mm | SW7 |
| 1 | Down | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Left | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | Main Board | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06_P1.00mm_Horizontal | J1 |
| 1 | Right | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | Select | Button_Switch_THT:SW_PUSH_6mm | SW5 |
| 1 | Start | Button_Switch_THT:SW_PUSH_6mm | SW6 |
| 1 | TCA8418 | lib_fp:WQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm | U1 |
| 1 | TSL2591 | lib_fp:AMS_TSL2591 | U2 |
| 1 | Touch Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad | J2 |
| 1 | Up | Button_Switch_THT:SW_PUSH_6mm | SW1 |
The 25 most common of 30 parts.
More from dkonigsberg/nestronic
1- 2 layers127 × 114.3 mm

Similar boards
- 2 layers192.4 × 50 mm

- 2 layers97.2 × 81.3 mm

Radiotxt
AnthonyDiGirolamo/i2c-thumb-keyboard
Handheld tactile switch keyboard using the TCA8418.
85 parts30MIT - 2 layers149.9 × 167.6 mm

Collins FMS-3000
neilenns/Collins-FMS-3000
PCB for a replica Collins FMS-3000 to use with MobiFlight
126 parts6MIT - 2 layers60 × 55 mm

3x4 keyboard
Tomas-Kuchta-FPV/Travel-Buddy
Pocketable, smart and sleek Meshtastic node. With keyboard, Eink screen, GPS and all day baterry life thanks to it's Solar panel and nRF52 in Wio tracker L1.
33 parts6CERN-OHL-W-2.0 - 2 layers88 × 90.3 mm

KeebDeckHexpansion
davedarko/KeebDeckHexpansion
A Keyboard Hexpansion using the solder.party KeebDeck Keyboard
39 parts5MIT - 2 layers86 × 165 mm

Calculator
Ethan-Poag/Flight-Data-Computer
An easy to build open source alternative to the ASA CX-3 aviation data computer.
131 parts3GPL-3.0 - 2 layers99.1 × 59.7 mm

- 2 layers88 × 90.3 mm

Keebdexpansion
emfcamp/Keebdexpansion
A keyboard hexpansion for the Tildagon badge using the solder.party KeebDeck Keyboard. Software for the hexpansion is provided by @sodoku.
30 parts2MIT
Questions
How big is the Nes input PCB?
It measures 101.6 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nes input use?
30 parts, built around the TSL25911FN and TCA8418RTW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nes input KiCad files?
From the dkonigsberg/nestronic repository on GitHub, at the commit this page was made from: the board is hardware/input-board/nes-input.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nes input design in my own project?
Its repository states no licence, so its author keeps all rights: ask dkonigsberg before reusing the design.