Skip to the content
2 layers20.4 × 20 mmDog Low Water Sensor SMD, the printed circuit board in 3D

Dog Low Water Sensor SMD

dkhill/Dog-Low-Water-Sensor-SMD

Tribble's Low Water Sensor - SMD

Size
20.4 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
9
Pads
31
Tracks, vias
77, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
27 Aug 2023
Updated
27 Aug 2023

Overview

Dog Low Water Sensor SMD is an open-source printed circuit board by dkhill, from the dkhill/Dog-Low-Water-Sensor-SMD repository on GitHub. It is a 2-layer board of 20.4 × 20 mm with 16 parts on 9 nets, routed with 77 tracks and 0 vias.

It is built around the BC847. Its parts include 5 resistors, 4 connectors and 3 transistors. It belongs with the sensors and measurement boards of this library.

Main components

1

Parts

16
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.5mmH1, H2, H3, H4
310KResistor_SMD:R_0603_1608MetricR1, R2, R3
3BC847Package_TO_SOT_SMD:SOT-23Q1, Q2, Q5
11KResistor_SMD:R_0603_1608MetricR4
11MResistor_SMD:R_0603_1608MetricR5
1Battery 9VDCConnector_Wire:SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mmJ2
1BuzzerConnector_Wire:SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mmJ3
1LEDConnector_Wire:SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mmJ4
1Water ProbesConnector_Wire:SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mmJ1

Similar boards

  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers130 × 80 mmSmu main 1, the printed circuit board in 3D

    Smu main 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    210 parts244
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 4 layers124.6 × 68.7 mmOssc board, the printed circuit board in 3D

    Ossc board

    marqs85/ossc_pcb

    ossc pcb design files

    265 parts163
  • 2 layers200 × 100 mmPolykit x monosynth, the printed circuit board in 3D

    Polykit x monosynth

    polykit/polykit-x-monosynth

    The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer

    167 parts94
  • 2 layers156.6 × 125.2 mmAutoFeeder, the printed circuit board in 3D

    AutoFeeder

    ErichStyger/McuOpenPnP_Machine

    Repository for the McuOnEclipse OpenPnP machine

    58 parts69
  • 2 layers45.2 × 36.6 mmKaffeeInterface v1, the printed circuit board in 3D

    KaffeeInterface v1

    misteu/RPiCoffee

    Modding / hacking of a coffee machine (DeLonghi ECAM 22.110.B Magnifica S) for IoT capabilities

    50 parts64BSD-3-Clause
  • 4 layers43.8 × 30.2 mmS VHS ZX Spectrum Rev. D, the printed circuit board in 3D

    S VHS ZX Spectrum Rev. D

    redhawk668/ZX-Spectrum-S-Video

    S-Video Modification PCB for the ZX Spectrum

    17 parts47GPL-3.0

Questions

How big is the Dog Low Water Sensor SMD PCB?

It measures 20.4 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dog Low Water Sensor SMD use?

16 parts, built around the BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dog Low Water Sensor SMD KiCad files?

From the dkhill/Dog-Low-Water-Sensor-SMD repository on GitHub, at the commit this page was made from: the board is Dog Low Water Sensor SMD.kicad_pcb and its schematic Dog Low Water Sensor SMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dog Low Water Sensor SMD design in my own project?

Its repository states no licence, so its author keeps all rights: ask dkhill before reusing the design.