
FlightController Drone
damnitzhemanth-oss/Flight_Controller
Custom STM based flightcontroller designed from scratch.

NEC PC 8801 Type A keyboard PCB (work in progress)
Nec pc-8801-type a is an open-source printed circuit board by djvs, from the djvs/nec-pc-8801-type-a repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 435 × 123 mm with 268 parts on 181 nets, routed with 2,066 tracks and 476 vias.
It is built around the 74AHCT1G125SE, 24LC64(LX) and USBLC6-2SC6, with the WS2812B among its other parts. Its parts include 112 diodes, 19 capacitors, 14 resistors, 5 ICs and 4 transistors. It belongs with the keyboards and input boards and the STM32 boards of this library.

USB/QMK STM32F401RETx PCB for NEC PC 8801 Type A (Alps) with MX SMK/NEC switch support. Also with WS2812B addressable LED & buzzer support.
Released without warranty, use at your own risk. Not ready for printing yet.
PRs & feedback welcome!
Dimensions: 437mm x 131mm
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 109 | D_Small | Diode_SMD:D_SOD-123 | D1, D10, D11, D12, D13, D14, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109 +93 |
| 109 | mx-alps-nec | MX_NEC:mx-nec-alps | SW_0_1, SW_1_1, SW_2_1, SW_3_1, SW_4_1, SW_5_1, SW_6_1, SW_7_1, SW_8_1, SW_9_1, SW_ALT_1, SW_AMOG_1, SW_ARRDEXT1, SW_ARRLEXT1, SW_ARRREXT1, SW_ARRUPEXT_1 +93 |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11, C12, C13, C14, C19 |
| 6 | 62k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R12, R14, R15, R16, R17 |
| 5 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R8, R9, R10, R11 |
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C16, C17, C18, C21 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C8, C20 |
| 3 | WS2812B | WS2812B:WS2812BDual | LED1, LED2, LED3 |
| 2 | 10pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23, C24 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C22 |
| 2 | Q_NMOS_GSD 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 24LC64 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | 2N3904 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 390 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 74AHCT1G125 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | 8MHz | acheron_Components:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_Mallory_AST1109MLTRQ | BUZ1 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | Ferrite_Bead | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | Q_PMOS_GSD AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | STM32F411RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | SW_Push | controller:switch_K2-1187SQ-A4SW-06 | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-666 | U5 |
| 1 | XC6206P332NR | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |

damnitzhemanth-oss/Flight_Controller
Custom STM based flightcontroller designed from scratch.

neon-beat/neon-beat-buzzer-pcb
Electronic design for the Neon Beat buzzer

tanaes/OvoEasy_incubator_controller
KiCad design for the OvoEasy incubator controller board

verIdyia/astra-board
ESP32-C3 development board: a documented AI-assisted PCB experiment

punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark


purdeaandrei/overnumpad_controller_1xb
An open source replacement keyboard controller for 4th generation IBM/Lexmark keyboards, and for some Unicomp keyboards

It measures 435 × 123 mm and has 2 copper layers, 1.6 mm thick.
268 parts, built around the 74AHCT1G125SE, 24LC64(LX), USBLC6-2SC6 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the djvs/nec-pc-8801-type-a repository on GitHub, at the commit this page was made from: the board is necpc8801typea.kicad_pcb and its schematic necpc8801typea.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).