

ChunkyXiao
Secret Project
- Size
- 369.6 × 158.7 mm
- Copper layers
- 4
- Thickness
- 1.9 mm
- Parts
- 279
- Nets
- 270
- Pads
- 2,229
- Tracks, vias
- 4,026, 679
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Aug 2022
- Updated
- 13 Aug 2022
Overview
ChunkyXiao is an open-source printed circuit board by freznel10, from the freznel10/Zia repository on GitHub. It is a 4-layer board of 369.6 × 158.7 mm with 279 parts on 270 nets, routed with 4,026 tracks and 679 vias.
It is built around the 24LC64(LX), SN74AHCT1G125DBVR(UMW) and USBLC6-2SC6, with the RS-06K22R0FT, TYPE-C-31-M-12 and VL120628H among its other parts. Its parts include 102 capacitors, 76 switches, 20 ICs, 18 resistors and 16 connectors. It belongs with the RP2040 boards of this library.
Main components
624LC64(LX)
SOP-8-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 100 Years 1MHz 5ms 64Kbit Hardware write protection function、Noise suppression function I2C SOP-8 EEPROM ROHSlingxingicEEPROMSN74AHCT1G125DBVR(UMW)
SOT-23-5-40℃~+125℃ 1 1 10uA 12ns@5V,50pF 2V 3.8V、4.4V 4.5V~5.5V 440mV 74AHCT 800mV 8mA 8mA SOT-23-5 Logic Gates ROHSUMWLogic GatesUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)RS-06K22R0FT
1206-55℃~+155℃ 200V 22Ω 250mW Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSGuangdong Fenghua Advanced Tech (FH)Chip Resistor - Surface MountTYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB ConnectorsVL120628H
-Vibration MotorsJinlong Machinery
Parts
279| Qty | Value | Footprint | References |
|---|---|---|---|
| 74 | cap_100nF_16v_0402 | kbd:C_0402_1005Metric-no silk | C29, C30, C31, C32, C33, C34, C35, C36, C37, C38, C39, C100, C101, C102, C103, C104 +58 |
| 37 | SW_PUSH_LED-SK | prettylib:MX_ChocV1V2_HS-rot | SW2, SW4, SW12, SW14, SW17, SW19, SW22, SW24, SW27, SW29, SW32, SW33, SW34, SW36, SW39, SW40 +21 |
| 35 | SW_PUSH_LED-SK | prettylib:MX_ChocV1V2_HS | SW1, SW3, SW10, SW11, SW13, SW15, SW16, SW18, SW20, SW21, SW23, SW25, SW26, SW28, SW30, SW31 +19 |
| 19 | R_Pack04 | kbd:R_Array_Concave_4x0603-no silk | RN1, RN3, RN4, RN5, RN6, RN10, RN11, RN12, RN13, RN14, RN15, RN16, RN17, RN18, RN19, RN20 +3 |
| 12 | 100n | kbd:C_0402_1005Metric-no silk | C1, C2, C4, C5, C6, C7, C8, C9, C10, C11, C23, C24 |
| 10 | 1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C20, C21, C22, C25, C26, C27, C28, C65, C66 |
| 10 | TSSOP-16_4.4x5mm_P0.65mm-no ref | kbd:TSSOP-16_4.4x5mm_P0.65mm-no ref | U5, U6, U8, U9, U11, U12, U13, U15, U17, U18 |
| 7 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5, R10, R11, R16, R17 |
| 6 | 22r | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R7, R12, R13, R18, R19 |
| 4 | 1u | SeaPicro:C_0402_1005Metric | C15, C16, C17, C18 |
| 4 | 4.7k | Resistor_SMD:R_0402_1005Metric | R8, R9, R14, R15 |
| 4 | Conn_01x01_Female | prettylib:1X01_OVAL | J9, J10, J11, J12 |
| 4 | TestPoint | kbd:TESTPOINT_PAD_2MM | TP1, TP2, TP3, TP4 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C3, C12 |
| 2 | 2.54 | SeaPicro:PinHeader_1x01_P2.54mm_Circle | J3, J5 |
| 2 | 24LC64 | kbd:CAT24C512 SOIC-8 | U10, U20 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | 4A/0805 | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1, FB2 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R3 |
| 2 | Conn_01x01_Female | kbd:1X01_OVAL | J7, J8 |
| 2 | Conn_01x12_Female | prettylib:FPC-SMD_FPC05012-09200-.5mm | J4, J6 |
| 2 | GC9A01 | prettylib:GC9A01-biggers hole | J13, J14 |
| 2 | GC9A01 | prettylib:GC9A01Round1.28-bare screen | J15, J16 |
| 2 | HRO-TYPE-C-31-M-12-HandSoldering-NoSBU | other_parts:HRO-TYPE-C-31-M-12-mod | J1, J2 |
| 2 | LM66100DCKR | prettylib:SOP65P210X110-6N | D1, D2 |
| 2 | NAV_SWITCH-_K1-1508SA-03 | random-keyboard-parts:SW-SMD_K1-1508SA-03 | S1, S2 |
| 2 | NetTie_2 | kbd:NetTie-2_SMD_Pad3.0mm | NT2, NT3 |
| 2 | SMD-PPTC-1000MA-8V_1206_ | Fuse:Fuse_1206_3216Metric | F1, F2 |
| 2 | SN74AHCT1G125DBVR | Package_TO_SOT_SMD:SOT-23-5 | U1, U14 |
| 2 | SW_SPST | Keebio-Parts:SW_SPST_TL3342 | SW5, SW74 |
| 2 | Symbol_minus | kbd:SYMBOL_MINUS | SYM3, SYM4 |
| 2 | Symbol_plus | kbd:SYMBOL_PLUS | SYM1, SYM2 |
| 2 | Texas_DSBGA-9_1.4715x1.4715mm_Layout3x3_P0.5mm | Package_BGA:Texas_DSBGA-9_1.4715x1.4715mm_Layout3x3_P0.5mm | IC1, IC2 |
| 2 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3, U4 |
| 2 | VL120628H | prettylib:VL120628H | LRA1, LRA2 |
| 2 | xiao | prettylib:xiao | U2, U16 |
| 1 | R_Pack04-10k | kbd:R_Array_Concave_4x0603-no silk | RN2 |
Similar boards
- 4 layers368.2 × 159.8 mm

- 2 layers

- 4 layers91 × 91 mm

Open micro sister
TomBonness/open-micro
Open-source USB/BLE desktop programming controller with RGB status integration
93 parts - 2 layers69.6 × 37.3 mm

Controller
purdeaandrei/overnumpad_controller_1xb
An open source replacement keyboard controller for 4th generation IBM/Lexmark keyboards, and for some Unicomp keyboards
65 parts27 - 2 layers435 × 123 mm

Nec pc-8801-type a
djvs/nec-pc-8801-type-a
NEC PC 8801 Type A keyboard PCB (work in progress)
268 parts2CC-BY-SA-4.0 - 4 layers130 × 130 mm

Smart Metering
frahncky/Smart-Metering
Analisador trifásico de energia e qualidade de energia com interface gráfica touchscreen.
230 parts - 4 layers54 × 84 mm

StepperLockingSystem
netz39/Stepper-Locking-System
Contains encoder & processor boards for closed-loop stepper motor angle control. Steering the key/door knob with the might of stepper motors.
107 partsMIT - 4 layers150 × 30 mm

Single sh proto
andrewsharmon/rp2350-stepper-controller
Low-cost 10-axis sine-microstepping controller for small steppers on the RP2350 (PIO + DMA). WIP.
163 partsMIT
Questions
How big is the ChunkyXiao PCB?
It measures 369.6 × 158.7 mm and has 4 copper layers, 1.9 mm thick.
What parts does the ChunkyXiao use?
279 parts, built around the 24LC64(LX), SN74AHCT1G125DBVR(UMW), USBLC6-2SC6 and RS-06K22R0FT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ChunkyXiao KiCad files?
From the freznel10/Zia repository on GitHub, at the commit this page was made from: the board is ChunkyXiao.kicad_pcb and its schematic ChunkyXiao.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ChunkyXiao design in my own project?
Its repository states no licence, so its author keeps all rights: ask freznel10 before reusing the design.