4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0
2 layers38.1 × 59.7 mm
Esp32dev rfm95
dirm02/esp32dev-node2ESP32 + RFM95 LORA Note with OLED Display and Joystick PCB
- Size
- 38.1 × 59.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 25
- Pads
- 86
- Tracks, vias
- 243, 21
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 31 Jul 2018
- Updated
- 8 Jul 2018
Overview
Esp32dev rfm95 is an open-source printed circuit board by dirm02, from the dirm02/esp32dev-node repository on GitHub. It is a 2-layer board of 38.1 × 59.7 mm with 18 parts on 25 nets, routed with 243 tracks and 21 vias.
It is built around the RFM95W-868S2. Its parts include 5 resistors, 5 switches, 3 connectors, 2 capacitors and 2 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
1README
README.mdesp32dev-node
ESP32 + RFM95 LORA Note with OLED Display and Joystick PCB
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | 1k | Resistors_SMD:R_1206_HandSoldering | R4 |
| 1 | 1uF | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | 2k | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 3.3k | Resistors_SMD:R_1206_HandSoldering | R5 |
| 1 | 330 | Resistors_SMD:R_1206_HandSoldering | R2 |
| 1 | 620 | Resistors_SMD:R_1206_HandSoldering | R3 |
| 1 | ANT | Wire_Pads:SolderWirePad_single_2-5mmDrill | P2 |
| 1 | Dwn | nodemcu:SW_SPST_B3U-1000P | SW3 |
| 1 | ESP32-Dev | nodemcu:ESP32-DEV2 | U1 |
| 1 | ExtraPins | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | P3 |
| 1 | GPIOEXTRA | Socket_Strips:Socket_Strip_Straight_1x07_Pitch2.54mm | P1 |
| 1 | Lft | nodemcu:SW_SPST_B3U-1000P | SW4 |
| 1 | Ok | nodemcu:SW_SPST_B3U-1000P | SW2 |
| 1 | Oled96 | nodemcu:Oled96 | LCD1 |
| 1 | RFM95W-868S2 | mysensors_radios:RFM69HW_SMD_Handsoldering | U2 |
| 1 | Rght | nodemcu:SW_SPST_B3U-1000P | SW5 |
| 1 | UP | nodemcu:SW_SPST_B3U-1000P | SW1 |
Questions
How big is the Esp32dev rfm95 PCB?
It measures 38.1 × 59.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32dev rfm95 use?
18 parts, built around the RFM95W-868S2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32dev rfm95 KiCad files?
From the dirm02/esp32dev-node repository on GitHub, at the commit this page was made from: the board is esp32dev_rfm95.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32dev rfm95 design in my own project?
Its repository states no licence, so its author keeps all rights: ask dirm02 before reusing the design.
Similar boards
- 4 layers83 × 109 mm
- 2 layers57 × 35.5 mm
- 2 layers45 × 53 mm
LoRa Node
cernohorsky/LoRa-Node
Simple LoRa Node based on Arduino Pro mini with RFM95W module and PCB antenna.
35 parts66 - 2 layers72 × 27 mm
- 2 layers61.5 × 18.7 mm
LoRA USBStick
ElectronicCats/CatWAN_USB_Stick
An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®
36 parts50GPL-3.0 - 2 layers79.2 × 68.8 mm
Environment slave
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
72 parts30MIT - 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28