
Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

My 60% keyboard PCB
PCB sch is an open-source printed circuit board by dinhjack123, from the dinhjack123/60-PCB repository on GitHub. It is a 2-layer board of 285.8 × 95.3 mm with 144 parts on 103 nets, routed with 1,267 tracks and 169 vias.
It is built around the ATMEGA32U4-AU and PRTR5V0U2X. Its parts include 61 diodes, 7 capacitors, 6 resistors, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
My 60% keyboard PCB
| Qty | Value | Footprint | References |
|---|---|---|---|
| 61 | D | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +45 |
| 3 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 1 | #0 | MX_Hotswap:MX-Hotswap-1U | K?11 |
| 1 | #1 | MX_Hotswap:MX-Hotswap-1U | K?2 |
| 1 | #2 | MX_Hotswap:MX-Hotswap-1U | K?3 |
| 1 | #3 | MX_Hotswap:MX-Hotswap-1U | K?4 |
| 1 | #4 | MX_Hotswap:MX-Hotswap-1U | K?5 |
| 1 | #5 | MX_Hotswap:MX-Hotswap-1U | K?6 |
| 1 | #6 | MX_Hotswap:MX-Hotswap-1U | K?7 |
| 1 | #7 | MX_Hotswap:MX-Hotswap-1U | K?8 |
| 1 | #8 | MX_Hotswap:MX-Hotswap-1U | K?9 |
| 1 | #9 | MX_Hotswap:MX-Hotswap-1U | K?10 |
| 1 | ' | MX_Hotswap:MX-Hotswap-1U | K?40 |
| 1 | , | MX_Hotswap:MX-Hotswap-1U | K?50 |
| 1 | - | MX_Hotswap:MX-Hotswap-1U | K?12 |
| 1 | . | MX_Hotswap:MX-Hotswap-1U | K?51 |
| 1 | / | MX_Hotswap:MX-Hotswap-1U | K?52 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 500m | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | ; | MX_Hotswap:MX-Hotswap-1U | K?39 |
| 1 | = | MX_Hotswap:MX-Hotswap-1U | K?13 |
| 1 | A | MX_Hotswap:MX-Hotswap-1U | K?30 |
| 1 | ATmega32U4-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | random-keyboard-parts:Reset_Pretty-Mask | J1 |
| 1 | B | MX_Hotswap:MX-Hotswap-1U | K?47 |
| 1 | BSPC | MX_Hotswap:MX-Hotswap-2U | K?14 |
| 1 | C | MX_Hotswap:MX-Hotswap-1U | K?45 |
| 1 | CPLK | MX_Hotswap:MX-Hotswap-1.75U | K?29 |
| 1 | D | MX_Hotswap:MX-Hotswap-1U | K?32 |
| 1 | E | MX_Hotswap:MX-Hotswap-1U | K?18 |
| 1 | ENTER | MX_Hotswap:MX-Hotswap-2.25U | K?41 |
| 1 | ESC | MX_Hotswap:MX-Hotswap-1U | K?1 |
| 1 | F | MX_Hotswap:MX-Hotswap-1U | K?33 |
| 1 | FN | MX_Hotswap:MX-Hotswap-1.25U | K?61 |
| 1 | G | MX_Hotswap:MX-Hotswap-1U | K?34 |
| 1 | H | MX_Hotswap:MX-Hotswap-1U | K?35 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-HandSoldering | USB1 |
| 1 | I | MX_Hotswap:MX-Hotswap-1U | K?23 |
| 1 | J | MX_Hotswap:MX-Hotswap-1U | K?36 |
| 1 | K | MX_Hotswap:MX-Hotswap-1U | K?37 |
| 1 | L | MX_Hotswap:MX-Hotswap-1U | K?38 |
| 1 | LALT | MX_Hotswap:MX-Hotswap-1.25U | K?56 |
| 1 | LCTRL | MX_Hotswap:MX-Hotswap-1.25U | K?54 |
| 1 | LSHIFT | MX_Hotswap:MX-Hotswap-2.25U | K?42 |
| 1 | M | MX_Hotswap:MX-Hotswap-1U | K?49 |
| 1 | N | MX_Hotswap:MX-Hotswap-1U | K?48 |
| 1 | O | MX_Hotswap:MX-Hotswap-1U | K?24 |
| 1 | P | MX_Hotswap:MX-Hotswap-1U | K?25 |
| 1 | PG | MX_Hotswap:MX-Hotswap-1.25U | K?59 |
| 1 | PRTR5V0U2X | random-keyboard-parts:SOT143B | U2 |
| 1 | Q | MX_Hotswap:MX-Hotswap-1U | K?16 |
| 1 | R | MX_Hotswap:MX-Hotswap-1U | K?19 |
| 1 | RALT | MX_Hotswap:MX-Hotswap-1.25U | K?58 |
| 1 | RCTRL | MX_Hotswap:MX-Hotswap-1.25U | K?60 |
| 1 | RSHIFT | MX_Hotswap:MX-Hotswap-2.75U | K?53 |
| 1 | S | MX_Hotswap:MX-Hotswap-1U | K?31 |
| 1 | SPACE | MX_Hotswap:MX-Hotswap-6.25U-ReversedStabilizers | K?57 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW1 |
| 1 | T | MX_Hotswap:MX-Hotswap-1U | K?20 |
| 1 | TAB | MX_Hotswap:MX-Hotswap-1.5U | K?15 |
| 1 | U | MX_Hotswap:MX-Hotswap-1U | K?22 |
| 1 | V | MX_Hotswap:MX-Hotswap-1U | K?46 |
| 1 | W | MX_Hotswap:MX-Hotswap-1U | K?17 |
| 1 | WINDOWS | MX_Hotswap:MX-Hotswap-1.25U | K?55 |
| 1 | X | MX_Hotswap:MX-Hotswap-1U | K?44 |
| 1 | Y | MX_Hotswap:MX-Hotswap-1U | K?21 |
| 1 | Z | MX_Hotswap:MX-Hotswap-1U | K?43 |
| 1 | [ | MX_Hotswap:MX-Hotswap-1U | K?26 |
| 1 | \ | MX_Hotswap:MX-Hotswap-1.5U | K?28 |
| 1 | ] | MX_Hotswap:MX-Hotswap-1U | K?27 |
The 142 most common of 144 parts.

sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!


markstory/ursa-minor-keyboard
Design and schematics for the ursaminor keyboard



makenova/reverie
a mini 1800 keyboard based on the Elongate, Clarabelle, and Garbage Truck Keyboards

makenova/micro_redox
A family of boards inspired by the microdox and ferris

It measures 285.8 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
144 parts, built around the ATMEGA32U4-AU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dinhjack123/60-PCB repository on GitHub, at the commit this page was made from: the board is PCB-sch/PCB-sch.kicad_pcb and its schematic PCB-sch/PCB-sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dinhjack123 before reusing the design.